Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 1003:f1b78bc8de10 BootloaderOstc5

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Bootloader improve init sequence: Initialization of the BT module failed with the previous version. Root cause could be that the commands were send to fast to the module and the error counter expired before the configuration was stored. To avoid this problem a timer has been added which delays the transmission of commands by 100ms.
author Ideenmodellierer
date Thu, 01 May 2025 17:52:17 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit