Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h @ 232:f0069f002c55 div-fixes-4-1
Bugfix: make date/time setting work over reboots
Setting the time/date over the UART interface or by the menu, seems
to work, but a reboot of the RTE brings back strange, seemingly
random, time.
The reason for this is rather simple. In the settings, a time
is stored, based on some flawed logic, and that time was restored
on reboot. There is no reason to store any time, when the moment of
restoring it is unrelated in time. So, the fix is simple: do not
set time (in the RTC) based on some time from the past. The whole idea
of a RTC is that it does preserve the time for you, as long its
powered. Any attempt to do things better using stored time data is
futile (and nonsense).
And while working on his, also kick out some useless code from the RTE.
There is no reason to initialize the time on the RTC to some random
time/date in the past. A zero data/time is as good and any random
date.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Wed, 03 Apr 2019 21:11:56 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_spdifrx.h * @author MCD Application Team * @brief Header file of SPDIFRX HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_SPDIFRX_H #define __STM32F4xx_HAL_SPDIFRX_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F446xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup SPDIFRX * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types * @{ */ /** * @brief SPDIFRX Init structure definition */ typedef struct { uint32_t InputSelection; /*!< Specifies the SPDIF input selection. This parameter can be a value of @ref SPDIFRX_Input_Selection */ uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase. This parameter can be a value of @ref SPDIFRX_Max_Retries */ uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input. This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */ uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B. This parameter can be a value of @ref SPDIFRX_Channel_Selection */ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). This parameter can be a value of @ref SPDIFRX_Data_Format */ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_PT_Mask */ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_V_Mask */ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_PE_Mask */ }SPDIFRX_InitTypeDef; /** * @brief SPDIFRX SetDataFormat structure definition */ typedef struct { uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). This parameter can be a value of @ref SPDIFRX_Data_Format */ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_PT_Mask */ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_V_Mask */ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. This parameter can be a value of @ref SPDIFRX_PE_Mask */ }SPDIFRX_SetDataFormatTypeDef; /** * @brief HAL State structures definition */ typedef enum { HAL_SPDIFRX_STATE_RESET = 0x00U, /*!< SPDIFRX not yet initialized or disabled */ HAL_SPDIFRX_STATE_READY = 0x01U, /*!< SPDIFRX initialized and ready for use */ HAL_SPDIFRX_STATE_BUSY = 0x02U, /*!< SPDIFRX internal process is ongoing */ HAL_SPDIFRX_STATE_BUSY_RX = 0x03U, /*!< SPDIFRX internal Data Flow RX process is ongoing */ HAL_SPDIFRX_STATE_BUSY_CX = 0x04U, /*!< SPDIFRX internal Control Flow RX process is ongoing */ HAL_SPDIFRX_STATE_ERROR = 0x07U /*!< SPDIFRX error state */ }HAL_SPDIFRX_StateTypeDef; /** * @brief SPDIFRX handle Structure definition */ typedef struct { SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */ SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */ uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */ uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */ __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */ __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter (This field is initialized at the same value as transfer size at the beginning of the transfer and decremented when a sample is received. NbSamplesReceived = RxBufferSize-RxBufferCount) */ __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */ __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter (This field is initialized at the same value as transfer size at the beginning of the transfer and decremented when a sample is received. NbSamplesReceived = RxBufferSize-RxBufferCount) */ DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */ DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */ __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */ __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */ __IO uint32_t ErrorCode; /* SPDIFRX Error code */ }SPDIFRX_HandleTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants * @{ */ /** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code * @{ */ #define HAL_SPDIFRX_ERROR_NONE 0x00000000U /*!< No error */ #define HAL_SPDIFRX_ERROR_TIMEOUT 0x00000001U /*!< Timeout error */ #define HAL_SPDIFRX_ERROR_OVR 0x00000002U /*!< OVR error */ #define HAL_SPDIFRX_ERROR_PE 0x00000004U /*!< Parity error */ #define HAL_SPDIFRX_ERROR_DMA 0x00000008U /*!< DMA transfer error */ #define HAL_SPDIFRX_ERROR_UNKNOWN 0x00000010U /*!< Unknown Error error */ /** * @} */ /** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection * @{ */ #define SPDIFRX_INPUT_IN0 0x00000000U #define SPDIFRX_INPUT_IN1 0x00010000U #define SPDIFRX_INPUT_IN2 0x00020000U #define SPDIFRX_INPUT_IN3 0x00030000U /** * @} */ /** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries * @{ */ #define SPDIFRX_MAXRETRIES_NONE 0x00000000U #define SPDIFRX_MAXRETRIES_3 0x00001000U #define SPDIFRX_MAXRETRIES_15 0x00002000U #define SPDIFRX_MAXRETRIES_63 0x00003000U /** * @} */ /** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity * @{ */ #define SPDIFRX_WAITFORACTIVITY_OFF 0x00000000U #define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA) /** * @} */ /** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask * @{ */ #define SPDIFRX_PREAMBLETYPEMASK_OFF 0x00000000U #define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK) /** * @} */ /** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask * @{ */ #define SPDIFRX_CHANNELSTATUS_OFF 0x00000000U /* The channel status and user bits are copied into the SPDIF_DR */ #define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/ /** * @} */ /** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask * @{ */ #define SPDIFRX_VALIDITYMASK_OFF 0x00000000U #define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK) /** * @} */ /** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask * @{ */ #define SPDIFRX_PARITYERRORMASK_OFF 0x00000000U #define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK) /** * @} */ /** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection * @{ */ #define SPDIFRX_CHANNEL_A 0x00000000U #define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL) /** * @} */ /** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format * @{ */ #define SPDIFRX_DATAFORMAT_LSB 0x00000000U #define SPDIFRX_DATAFORMAT_MSB 0x00000010U #define SPDIFRX_DATAFORMAT_32BITS 0x00000020U /** * @} */ /** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode * @{ */ #define SPDIFRX_STEREOMODE_DISABLE 0x00000000U #define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO) /** * @} */ /** @defgroup SPDIFRX_State SPDIFRX State * @{ */ #define SPDIFRX_STATE_IDLE 0xFFFFFFFCU #define SPDIFRX_STATE_SYNC 0x00000001U #define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN) /** * @} */ /** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition * @{ */ #define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE) #define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE) #define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE) #define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE) #define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE) #define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE) #define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE ) /** * @} */ /** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition * @{ */ #define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE) #define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE) #define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR) #define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR) #define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD) #define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD) #define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR) #define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR) #define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR) /** * @} */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros * @{ */ /** @brief Reset SPDIFRX handle state * @param __HANDLE__ SPDIFRX handle. * @retval None */ #define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN) /** @brief Disable the specified SPDIFRX peripheral (IDLE State). * @param __HANDLE__ specifies the SPDIFRX Handle. * @retval None */ #define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE) /** @brief Enable the specified SPDIFRX peripheral (SYNC State). * @param __HANDLE__ specifies the SPDIFRX Handle. * @retval None */ #define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC) /** @brief Enable the specified SPDIFRX peripheral (RCV State). * @param __HANDLE__ specifies the SPDIFRX Handle. * @retval None */ #define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV) /** @brief Enable or disable the specified SPDIFRX interrupts. * @param __HANDLE__ specifies the SPDIFRX Handle. * @param __INTERRUPT__ specifies the interrupt source to enable or disable. * This parameter can be one of the following values: * @arg SPDIFRX_IT_RXNE * @arg SPDIFRX_IT_CSRNE * @arg SPDIFRX_IT_PERRIE * @arg SPDIFRX_IT_OVRIE * @arg SPDIFRX_IT_SBLKIE * @arg SPDIFRX_IT_SYNCDIE * @arg SPDIFRX_IT_IFEIE * @retval None */ #define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) #define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__))) /** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled. * @param __HANDLE__ specifies the SPDIFRX Handle. * @param __INTERRUPT__ specifies the SPDIFRX interrupt source to check. * This parameter can be one of the following values: * @arg SPDIFRX_IT_RXNE * @arg SPDIFRX_IT_CSRNE * @arg SPDIFRX_IT_PERRIE * @arg SPDIFRX_IT_OVRIE * @arg SPDIFRX_IT_SBLKIE * @arg SPDIFRX_IT_SYNCDIE * @arg SPDIFRX_IT_IFEIE * @retval The new state of __IT__ (TRUE or FALSE). */ #define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) /** @brief Checks whether the specified SPDIFRX flag is set or not. * @param __HANDLE__ specifies the SPDIFRX Handle. * @param __FLAG__ specifies the flag to check. * This parameter can be one of the following values: * @arg SPDIFRX_FLAG_RXNE * @arg SPDIFRX_FLAG_CSRNE * @arg SPDIFRX_FLAG_PERR * @arg SPDIFRX_FLAG_OVR * @arg SPDIFRX_FLAG_SBD * @arg SPDIFRX_FLAG_SYNCD * @arg SPDIFRX_FLAG_FERR * @arg SPDIFRX_FLAG_SERR * @arg SPDIFRX_FLAG_TERR * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) /** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit. * @param __HANDLE__ specifies the USART Handle. * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set * to clear the corresponding interrupt * This parameter can be one of the following values: * @arg SPDIFRX_FLAG_PERR * @arg SPDIFRX_FLAG_OVR * @arg SPDIFRX_SR_SBD * @arg SPDIFRX_SR_SYNCD * @retval None */ #define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__)) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup SPDIFRX_Exported_Functions * @{ */ /** @addtogroup SPDIFRX_Exported_Functions_Group1 * @{ */ /* Initialization/de-initialization functions **********************************/ HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif); HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif); HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat); /** * @} */ /** @addtogroup SPDIFRX_Exported_Functions_Group2 * @{ */ /* I/O operation functions ***************************************************/ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout); HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif); /* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); /** * @} */ /** @addtogroup SPDIFRX_Exported_Functions_Group3 * @{ */ /* Peripheral Control and State functions ************************************/ HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif); uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros * @{ */ #define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \ ((INPUT) == SPDIFRX_INPUT_IN2) || \ ((INPUT) == SPDIFRX_INPUT_IN3) || \ ((INPUT) == SPDIFRX_INPUT_IN0)) #define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \ ((RET) == SPDIFRX_MAXRETRIES_3) || \ ((RET) == SPDIFRX_MAXRETRIES_15) || \ ((RET) == SPDIFRX_MAXRETRIES_63)) #define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \ ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF)) #define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \ ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF)) #define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \ ((VAL) == SPDIFRX_VALIDITYMASK_ON)) #define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \ ((VAL) == SPDIFRX_PARITYERRORMASK_ON)) #define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \ ((CHANNEL) == SPDIFRX_CHANNEL_B)) #define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \ ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \ ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS)) #define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \ ((MODE) == SPDIFRX_STEREOMODE_ENABLE)) #define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \ ((VAL) == SPDIFRX_CHANNELSTATUS_OFF)) /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions * @{ */ /** * @} */ /** * @} */ /** * @} */ #endif /* STM32F446xx */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_SPDIFRX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/