Mercurial > public > ostc4
view Common/Drivers/STM32F4xx/Include/system_stm32f4xx.h @ 396:effa6fb9eb89 ImproveBluetooth
Added function for BlueMod configuration:
Investigations of connection problems showed that there is a problem if the module is not able to forward data fast enough. The bottleneck in direction of microcontroller may be solved by increasing baud rate. To be backward (bootloader) compatible this is done temperoraly during every startup
Added function for signal stregth evaluation:
Quality of data connection may have an impact on stability => added function to visualize current state of connection. The evaluation may be requested remote using 'l' (0x6c) or by pressing next button while in service mode
Cleanup Disconnection procedure:
Disconnection issued by OSTC was realized by simply switching of the module which might have a negativ impact to remote devices. Second reason for change was that, e.g. in case of a timeout on OSTC side. a remote device might have continued sending firmware data causing OSTC to interpretate firmware image as service requests. E.g. resulting in a corrupted configuration. Instead of just switching off power a disconnection request is now send to the BlueMod.
Decreased size used for large data receiption:
Depending on device speed firmware transfer might be really slow. By decreasing the block size a short (6 seconds) timeout per block may be kept while the sender has more time for transfering the image
author | ideenmodellierer |
---|---|
date | Tue, 26 Nov 2019 22:12:25 +0100 |
parents | c78bcbd5deda |
children | 4e10a3e087a1 |
line wrap: on
line source
/** ****************************************************************************** * @file system_stm32f4xx.h * @author MCD Application Team * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /** @addtogroup CMSIS * @{ */ /** @addtogroup stm32f4xx_system * @{ */ /** * @brief Define to prevent recursive inclusion */ #ifndef __SYSTEM_STM32F4XX_H #define __SYSTEM_STM32F4XX_H #ifdef __cplusplus extern "C" { #endif /** @addtogroup STM32F4xx_System_Includes * @{ */ /** * @} */ /** @addtogroup STM32F4xx_System_Exported_types * @{ */ /* This variable is updated in three ways: 1) by calling CMSIS function SystemCoreClockUpdate() 2) by calling HAL API function HAL_RCC_GetSysClockFreq() 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency Note: If you use this function to configure the system clock; then there is no need to call the 2 first functions listed above, since SystemCoreClock variable is updated automatically. */ extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */ extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */ /** * @} */ /** @addtogroup STM32F4xx_System_Exported_Constants * @{ */ /** * @} */ /** @addtogroup STM32F4xx_System_Exported_Macros * @{ */ /** * @} */ /** @addtogroup STM32F4xx_System_Exported_Functions * @{ */ extern void SystemInit(void); extern void SystemCoreClockUpdate(void); /** * @} */ #ifdef __cplusplus } #endif #endif /*__SYSTEM_STM32F4XX_H */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/