Mercurial > public > ostc4
view OtherSources/data_exchange_main_mini.c @ 754:ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
In the previous version the autodetection was visible even if not supported by hardware. The autodetection will now only be shown if the ADC is available (new HW revision). A future improvment could be to make the decision based on a special HW number which indicates a OSTC4 version with external pin connector.
author | Ideenmodellierer |
---|---|
date | Tue, 07 Mar 2023 19:55:13 +0100 |
parents | 7801c5d8a562 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file data_exchange_main.c * @author heinrichs weikamp gmbh * @date 13-Oct-2014 * @version V0.0.2 * @since 27-May-2015 * @brief Communication with the second CPU == RTE system * @verbatim ============================================================================== ##### How to use ##### ============================================================================== ============================================================================== ##### Device Data ##### ============================================================================== main CPU always sends the device data info that it has at the moment on start it is INT32_MIN, INT32_MAX and 0 as initialized in data_central.c variable declaration second small CPU gets request to send its device data on receiption the data is merged with the data in externLogbookFlash, stored on the externLogbookFlash and from now on send to small CPU @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include <string.h> // for memcopy #include "stm32f4xx_hal.h" #include "stdio.h" #include "ostc.h" #include "data_central.h" #include "data_exchange_main.h" #include "base.h" #include "externLogbookFlash.h" /* Expoted variables --------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ SDataReceiveFromMaster dataOut; SDataExchangeSlaveToMaster dataIn; uint8_t data_old__lost_connection_to_slave_counter_temp = 0; /* Private types -------------------------------------------------------------*/ uint8_t DataEX_check_header_and_footer_ok(void); void DataEX_control_connection_while_asking_for_sleep(void); /* Exported functions --------------------------------------------------------*/ uint8_t DataEX_call(void) { DataEX_control_connection_while_asking_for_sleep(); for(int i=0;i<EXCHANGE_BUFFERSIZE;i++) *(uint8_t *)(((uint32_t)&dataOut) + i) = 0; dataOut.mode = MODE_SHUTDOWN; dataOut.header.checkCode[0] = 0xBB; dataOut.header.checkCode[1] = 0x01; dataOut.header.checkCode[2] = 0x01; dataOut.header.checkCode[3] = 0xBB; dataOut.footer.checkCode[0] = 0xF4; dataOut.footer.checkCode[1] = 0xF3; dataOut.footer.checkCode[2] = 0xF2; dataOut.footer.checkCode[3] = 0xF1; HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_SET); delayMicros(10); if(data_old__lost_connection_to_slave_counter_temp >= 3) { data_old__lost_connection_to_slave_counter_temp = 0; } else { HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_RESET); } HAL_SPI_TransmitReceive_DMA(&cpu2DmaSpi, (uint8_t *)&dataOut, (uint8_t *)&dataIn, EXCHANGE_BUFFERSIZE+1); return 1; } void DataEX_control_connection_while_asking_for_sleep(void) { if(!DataEX_check_header_and_footer_ok()) { data_old__lost_connection_to_slave_counter_temp += 1; } } uint8_t DataEX_check_header_and_footer_ok(void) { if(dataIn.header.checkCode[0] != 0xA1) return 0; if(dataIn.header.checkCode[1] != 0xA2) return 0; if(dataIn.header.checkCode[2] != 0xA3) return 0; if(dataIn.header.checkCode[3] != 0xA4) return 0; if(dataIn.footer.checkCode[0] != 0xE1) return 0; if(dataIn.footer.checkCode[1] != 0xE2) return 0; if(dataIn.footer.checkCode[2] != 0xE3) return 0; if(dataIn.footer.checkCode[3] != 0xE4) return 0; return 1; }