view wiki/Using OpenSTM32.md @ 810:e6827fcd7604

Only jump to Sensor view during charging if sensors are connected: In the past it could happen that the charger view was replaced by the sensor view which was not displaying values because no sensors were connected => no added value in performing the switch. In the new version the automatic jump to the sensor view will only be performed if sennsors are connected.
author Ideenmodellierer
date Sun, 27 Aug 2023 20:55:57 +0200
parents 0e7c16dd774d
children
line wrap: on
line source

# Using OpenSTM32 IDE to Compile OSTC4 Firmware #

The free and Open [STM32 IDE](http://www.openstm32.org/System%2BWorkbench%2Bfor%2BSTM32) is an integrated development environment based on _Eclipse_ that will allows you to compile and link code for the OSTC4 dive computer.
You will then be able to generate `.bin` firmware files to upload to your computer using your favourite tools, eg. [OSTC Companion](https://ostc-planner.net/companion). 

1. Register on http://www.openstm32.org/ : that will allows you to download the IDE.
2. Once registered and logged in, you can go to _Documentation_ and _Installation Manual_. Follow the instructions to install the IDE (available for Windows 7, MacOS and Linux).
3. Use the ready made project ... in ... 

Or you can create a brand new project by following the _How To_'s:

- [HowTo compile CPU1-Discovery main firmware](Detailed CPU1-Discovery Project.md)
- [HowTo compile CPU1-Discovery protected area firmware](Detailed CPU1-Upper Project.md)
- [HowTo compile CPU2-RTE real-time firmware](Detailed CPU2-RTE Project.md)
- [HowTo generate uploadable firmware file](Make Firmware File.md)