Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h @ 810:e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
In the past it could happen that the charger view was replaced by the sensor view which was not displaying values because no sensors were connected => no added value in performing the switch. In the new version the automatic jump to the sensor view will only be performed if sennsors are connected.
author | Ideenmodellierer |
---|---|
date | Sun, 27 Aug 2023 20:55:57 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_nand.h * @author MCD Application Team * @brief Header file of NAND HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_NAND_H #define __STM32F4xx_HAL_NAND_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) #include "stm32f4xx_ll_fsmc.h" #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) #include "stm32f4xx_ll_fmc.h" #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ STM32F479xx */ /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup NAND * @{ */ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) /* Exported typedef ----------------------------------------------------------*/ /* Exported types ------------------------------------------------------------*/ /** @defgroup NAND_Exported_Types NAND Exported Types * @{ */ /** * @brief HAL NAND State structures definition */ typedef enum { HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */ HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */ HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */ HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */ }HAL_NAND_StateTypeDef; /** * @brief NAND Memory electronic signature Structure definition */ typedef struct { /*<! NAND memory electronic signature maker and device IDs */ uint8_t Maker_Id; uint8_t Device_Id; uint8_t Third_Id; uint8_t Fourth_Id; }NAND_IDTypeDef; /** * @brief NAND Memory address Structure definition */ typedef struct { uint16_t Page; /*!< NAND memory Page address */ uint16_t Plane; /*!< NAND memory Plane address */ uint16_t Block; /*!< NAND memory Block address */ }NAND_AddressTypeDef; /** * @brief NAND Memory info Structure definition */ typedef struct { uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in bytes for 8 bits adressing or words for 16 bits addressing */ uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in bytes for 8 bits adressing or words for 16 bits addressing */ uint32_t BlockSize; /*!< NAND memory block size measured in number of pages */ uint32_t BlockNbr; /*!< NAND memory number of total blocks */ uint32_t PlaneNbr; /*!< NAND memory number of planes */ uint32_t PlaneSize; /*!< NAND memory plane size measured in number of blocks */ FunctionalState ExtraCommandEnable; /*!< NAND extra command needed for Page reading mode. This parameter is mandatory for some NAND parts after the read command (NAND_CMD_AREA_TRUE1) and before DATA reading sequence. Example: Toshiba THTH58BYG3S0HBAI6. This parameter could be ENABLE or DISABLE Please check the Read Mode sequnece in the NAND device datasheet */ }NAND_DeviceConfigTypeDef; /** * @brief NAND handle Structure definition */ typedef struct { FMC_NAND_TypeDef *Instance; /*!< Register base address */ FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */ HAL_LockTypeDef Lock; /*!< NAND locking object */ __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */ NAND_DeviceConfigTypeDef Config; /*!< NAND phusical characteristic information structure */ }NAND_HandleTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /* Exported macros ------------------------------------------------------------*/ /** @defgroup NAND_Exported_Macros NAND Exported Macros * @{ */ /** @brief Reset NAND handle state * @param __HANDLE__ specifies the NAND handle. * @retval None */ #define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup NAND_Exported_Functions NAND Exported Functions * @{ */ /** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ /* Initialization/de-initialization functions ********************************/ /* Initialization/de-initialization functions ********************************/ HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing); HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand); HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig); HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID); void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand); void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand); void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand); void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand); /** * @} */ /** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions * @{ */ /* IO operation functions ****************************************************/ HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand); HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead); HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite); HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead); HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite); HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToRead); HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToWrite); HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaToRead); HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaTowrite); HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand); uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); /** * @} */ /** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions * @{ */ /* NAND Control functions ****************************************************/ HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand); HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand); HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout); /** * @} */ /** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions * @{ */ /* NAND State functions *******************************************************/ HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup NAND_Private_Constants NAND Private Constants * @{ */ #define NAND_DEVICE1 0x70000000U #define NAND_DEVICE2 0x80000000U #define NAND_WRITE_TIMEOUT 0x01000000U #define CMD_AREA ((uint32_t)(1U<<16U)) /* A16 = CLE high */ #define ADDR_AREA ((uint32_t)(1U<<17U)) /* A17 = ALE high */ #define NAND_CMD_AREA_A ((uint8_t)0x00) #define NAND_CMD_AREA_B ((uint8_t)0x01) #define NAND_CMD_AREA_C ((uint8_t)0x50) #define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30) #define NAND_CMD_WRITE0 ((uint8_t)0x80) #define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10) #define NAND_CMD_ERASE0 ((uint8_t)0x60) #define NAND_CMD_ERASE1 ((uint8_t)0xD0) #define NAND_CMD_READID ((uint8_t)0x90) #define NAND_CMD_STATUS ((uint8_t)0x70) #define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A) #define NAND_CMD_RESET ((uint8_t)0xFF) /* NAND memory status */ #define NAND_VALID_ADDRESS 0x00000100U #define NAND_INVALID_ADDRESS 0x00000200U #define NAND_TIMEOUT_ERROR 0x00000400U #define NAND_BUSY 0x00000000U #define NAND_ERROR 0x00000001U #define NAND_READY 0x00000040U /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup NAND_Private_Macros NAND Private Macros * @{ */ /** * @brief NAND memory address computation. * @param __ADDRESS__ NAND memory address. * @param __HANDLE__ NAND handle. * @retval NAND Raw address value */ #define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \ (((__ADDRESS__)->Block + (((__ADDRESS__)->Plane) * ((__HANDLE__)->Config.PlaneSize)))* ((__HANDLE__)->Config.BlockSize))) /** * @brief NAND memory Column address computation. * @param __HANDLE__ NAND handle. * @retval NAND Raw address value */ #define COLUMN_ADDRESS( __HANDLE__) ((__HANDLE__)->Config.PageSize) /** * @brief NAND memory address cycling. * @param __ADDRESS__ NAND memory address. * @retval NAND address cycling value. */ #define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */ #define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */ #define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */ #define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */ /** * @brief NAND memory Columns cycling. * @param __ADDRESS__ NAND memory address. * @retval NAND Column address cycling value. */ #define COLUMN_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st Column addressing cycle */ #define COLUMN_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd Column addressing cycle */ /** * @} */ #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\ STM32F446xx || STM32F469xx || STM32F479xx */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_NAND_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/