Mercurial > public > ostc4
view wiki/Using OpenSTM32.md @ 645:e58f81cb25a7
Small changes in charger state handling:
Charger debounce time has been reduced to 5 seconds and the detection time of charger removal has been reduced to 15 second to be able to provide a faster feedback to the user.
In addition the battery stage reset has been added (only relevant for a getState function which is not used within the firmware at the moment.
author | Ideenmodellierer |
---|---|
date | Tue, 13 Apr 2021 19:18:32 +0200 |
parents | 0e7c16dd774d |
children |
line wrap: on
line source
# Using OpenSTM32 IDE to Compile OSTC4 Firmware # The free and Open [STM32 IDE](http://www.openstm32.org/System%2BWorkbench%2Bfor%2BSTM32) is an integrated development environment based on _Eclipse_ that will allows you to compile and link code for the OSTC4 dive computer. You will then be able to generate `.bin` firmware files to upload to your computer using your favourite tools, eg. [OSTC Companion](https://ostc-planner.net/companion). 1. Register on http://www.openstm32.org/ : that will allows you to download the IDE. 2. Once registered and logged in, you can go to _Documentation_ and _Installation Manual_. Follow the instructions to install the IDE (available for Windows 7, MacOS and Linux). 3. Use the ready made project ... in ... Or you can create a brand new project by following the _How To_'s: - [HowTo compile CPU1-Discovery main firmware](Detailed CPU1-Discovery Project.md) - [HowTo compile CPU1-Discovery protected area firmware](Detailed CPU1-Upper Project.md) - [HowTo compile CPU2-RTE real-time firmware](Detailed CPU2-RTE Project.md) - [HowTo generate uploadable firmware file](Make Firmware File.md)