Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h @ 220:e524a824d8f2 Improve_IPC_Sync
Added schedule point for functions executed once in a second
SPI communication takes place every 100ms triggered by the master (main). Synchronisation is done using the SPI RX complete callback which is called ~4ms after communication was started. In the previous implementation this could happen in parallel to usage of data. To solve this potential problem the execution of functions called once a second was moved from 1000ms to 980ms giving a 20ms window for execution.
author | ideenmodellierer |
---|---|
date | Sun, 31 Mar 2019 15:49:47 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_pwr_ex.h * @author MCD Application Team * @brief Header file of PWR HAL Extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_PWR_EX_H #define __STM32F4xx_HAL_PWR_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup PWREx * @{ */ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup PWREx_Exported_Constants PWREx Exported Constants * @{ */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) /** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode * @{ */ #define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS #define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS)) /** * @} */ /** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag * @{ */ #define PWR_FLAG_ODRDY PWR_CSR_ODRDY #define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY #define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY /** * @} */ #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ /** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale * @{ */ #if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) #define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */ #define PWR_REGULATOR_VOLTAGE_SCALE2 0x00000000U /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */ #else #define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to 180 MHz by activating the over-drive mode. */ #define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to 168 MHz by activating the over-drive mode. */ #define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */ #endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ /** * @} */ #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) /** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins * @{ */ #define PWR_WAKEUP_PIN2 0x00000080U #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) #define PWR_WAKEUP_PIN3 0x00000040U #endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \ STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ /** * @} */ #endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup PWREx_Exported_Constants PWREx Exported Constants * @{ */ #if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) /** @brief macros configure the main internal regulator output voltage. * @param __REGULATOR__ specifies the regulator output voltage to achieve * a tradeoff between performance and power consumption when the device does * not operate at the maximum frequency (refer to the datasheets for more details). * This parameter can be one of the following values: * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode * @retval None */ #define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ __IO uint32_t tmpreg = 0x00U; \ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ /* Delay after an RCC peripheral clock enabling */ \ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ UNUSED(tmpreg); \ } while(0U) #else /** @brief macros configure the main internal regulator output voltage. * @param __REGULATOR__ specifies the regulator output voltage to achieve * a tradeoff between performance and power consumption when the device does * not operate at the maximum frequency (refer to the datasheets for more details). * This parameter can be one of the following values: * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode * @retval None */ #define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ __IO uint32_t tmpreg = 0x00U; \ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ /* Delay after an RCC peripheral clock enabling */ \ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ UNUSED(tmpreg); \ } while(0U) #endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) /** @brief Macros to enable or disable the Over drive mode. * @note These macros can be used only for STM32F42xx/STM3243xx devices. */ #define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE) #define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE) /** @brief Macros to enable or disable the Over drive switching. * @note These macros can be used only for STM32F42xx/STM3243xx devices. */ #define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE) #define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE) /** @brief Macros to enable or disable the Under drive mode. * @note This mode is enabled only with STOP low power mode. * In this mode, the 1.2V domain is preserved in reduced leakage mode. This * mode is only available when the main regulator or the low power regulator * is in low voltage mode. * @note If the Under-drive mode was enabled, it is automatically disabled after * exiting Stop mode. * When the voltage regulator operates in Under-drive mode, an additional * startup delay is induced when waking up from Stop mode. */ #define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN) #define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN)) /** @brief Check PWR flag is set or not. * @note These macros can be used only for STM32F42xx/STM3243xx devices. * @param __FLAG__ specifies the flag to check. * This parameter can be one of the following values: * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode * is ready * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode * switching is ready * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode * is enabled in Stop mode * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) /** @brief Clear the Under-Drive Ready flag. * @note These macros can be used only for STM32F42xx/STM3243xx devices. */ #define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY) #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup PWREx_Exported_Functions PWREx Exported Functions * @{ */ /** @addtogroup PWREx_Exported_Functions_Group1 * @{ */ void HAL_PWREx_EnableFlashPowerDown(void); void HAL_PWREx_DisableFlashPowerDown(void); HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); uint32_t HAL_PWREx_GetVoltageRange(void); HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); #if defined(STM32F469xx) || defined(STM32F479xx) void HAL_PWREx_EnableWakeUpPinPolarityRisingEdge(void); void HAL_PWREx_EnableWakeUpPinPolarityFallingEdge(void); #endif /* STM32F469xx || STM32F479xx */ #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\ defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) void HAL_PWREx_EnableMainRegulatorLowVoltage(void); void HAL_PWREx_DisableMainRegulatorLowVoltage(void); void HAL_PWREx_EnableLowRegulatorLowVoltage(void); void HAL_PWREx_DisableLowRegulatorLowVoltage(void); #endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\ STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ defined(STM32F469xx) || defined(STM32F479xx) HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup PWREx_Private_Constants PWREx Private Constants * @{ */ /** @defgroup PWREx_register_alias_address PWREx Register alias address * @{ */ /* ------------- PWR registers bit address in the alias region ---------------*/ /* --- CR Register ---*/ /* Alias word address of FPDS bit */ #define FPDS_BIT_NUMBER PWR_CR_FPDS_Pos #define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U)) /* Alias word address of ODEN bit */ #define ODEN_BIT_NUMBER PWR_CR_ODEN_Pos #define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U)) /* Alias word address of ODSWEN bit */ #define ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos #define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U)) /* Alias word address of MRLVDS bit */ #define MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos #define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U)) /* Alias word address of LPLVDS bit */ #define LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos #define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U)) /** * @} */ /** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address * @{ */ /* --- CSR Register ---*/ /* Alias word address of BRE bit */ #define BRE_BIT_NUMBER PWR_CSR_BRE_Pos #define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U)) #if defined(STM32F469xx) || defined(STM32F479xx) /* Alias word address of WUPP bit */ #define WUPP_BIT_NUMBER PWR_CSR_WUPP_Pos #define CSR_WUPP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (WUPP_BIT_NUMBER * 4U)) #endif /* STM32F469xx || STM32F479xx */ /** * @} */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup PWREx_Private_Macros PWREx Private Macros * @{ */ /** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters * @{ */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) #define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ #if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) #define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) #else #define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) #endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ #if defined(STM32F446xx) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2)) #elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ defined(STM32F423xx) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \ ((PIN) == PWR_WAKEUP_PIN3)) #else #define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1) #endif /* STM32F446xx */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_PWR_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/