Mercurial > public > ostc4

view Discovery/Src/ostc.c @ 901:e4e9acfde839 Evo_2_23

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Bugfix simulator/planer: For deco calculation two structures are used. The calculation structure and the input structure. During simulation fast forward (+5min) the input structure is manipulated. Especially for vpm calculation it could happen that the input structure was manipulated and then overwritten by the calculation structure => deco and tts may have wrong values. To avoid this thedeco calculation status is now checked before doing the FF manupulation. Based an calculation state deco or input structures are manipulated. Surface time stamp in planer view: The planer used its own (buggy) implementation for calculation of tts. The timestamp for the surface arrival did not match the bottom time + TTS. The new implementation uses the tts calculated by the deco loop for generation of surface time stamp.
author Ideenmodellierer
date Wed, 02 Oct 2024 22:07:13 +0200
parents 8d3f3a635397
children
line wrap: on
line source

///////////////////////////////////////////////////////////////////////////////
/// -*- coding: UTF-8 -*-
///
/// \file   Discovery/Src/ostc.c
/// \brief  Hardware specific configuration
/// \author Heinrichs Weikamp gmbh
/// \date   05-Dec-2014
///
/// \details
///
/// $Id$
///////////////////////////////////////////////////////////////////////////////
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
///
///     This program is free software: you can redistribute it and/or modify
///     it under the terms of the GNU General Public License as published by
///     the Free Software Foundation, either version 3 of the License, or
///     (at your option) any later version.
///
///     This program is distributed in the hope that it will be useful,
///     but WITHOUT ANY WARRANTY; without even the implied warranty of
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
///     GNU General Public License for more details.
///
///     You should have received a copy of the GNU General Public License
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.
//////////////////////////////////////////////////////////////////////////////

/* Includes ------------------------------------------------------------------*/
#include "ostc.h"
#include "stm32f4xx_hal.h"

#ifndef BOOTLOADER_STANDALONE
#include "tCCR.h"
#endif

/* Exported variables --------------------------------------------------------*/
SPI_HandleTypeDef hspiDisplay;
SPI_HandleTypeDef cpu2DmaSpi;


UART_HandleTypeDef UartHandle;
#ifdef USART_PIEZO
UART_HandleTypeDef UartPiezoTxHandle;
#endif
UART_HandleTypeDef UartIR_HUD_Handle;

__IO ITStatus UartReady = RESET;
__IO ITStatus UartReadyHUD = RESET;

/* Private types -------------------------------------------------------------*/

/* Private variables ---------------------------------------------------------*/

/* Private variables with external access via get_xxx() function -------------*/
static uint8_t	hardwareDisplay = 0;		//< either OSTC4 LCD (=0) or new Screen (=1)
/* Private function prototypes -----------------------------------------------*/

/* Exported functions --------------------------------------------------------*/

/** SPI init function
    * called from HAL
    */
void MX_SPI_Init(void)
{
    hspiDisplay.Instance = SPI5;
    hspiDisplay.Init.Mode = SPI_MODE_MASTER;
    hspiDisplay.Init.Direction = SPI_DIRECTION_2LINES;
    hspiDisplay.Init.DataSize = SPI_DATASIZE_8BIT;
    hspiDisplay.Init.CLKPolarity = SPI_POLARITY_LOW;
    hspiDisplay.Init.CLKPhase = SPI_PHASE_1EDGE;
    hspiDisplay.Init.NSS = SPI_NSS_SOFT;
    hspiDisplay.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32;//SPI_BAUDRATEPRESCALER_4;//SPI_BAUDRATEPRESCALER_256;
    hspiDisplay.Init.FirstBit = SPI_FIRSTBIT_MSB;
    hspiDisplay.Init.TIMode = SPI_TIMODE_DISABLED;
    hspiDisplay.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
    HAL_SPI_Init(&hspiDisplay);

    cpu2DmaSpi.Instance                 = SPI1;
    cpu2DmaSpi.Init.Mode                = SPI_MODE_MASTER;
    cpu2DmaSpi.Init.Direction           = SPI_DIRECTION_2LINES;
    cpu2DmaSpi.Init.DataSize            = SPI_DATASIZE_8BIT;
    cpu2DmaSpi.Init.CLKPolarity         = SPI_POLARITY_LOW;
    cpu2DmaSpi.Init.CLKPhase            = SPI_PHASE_1EDGE;
    cpu2DmaSpi.Init.NSS                 = SPI_NSS_SOFT;//SPI_NSS_HARD_OUTPUT;//SPI_NSS_SOFT;
    cpu2DmaSpi.Init.BaudRatePrescaler   = SPI_BAUDRATEPRESCALER_128; 
    cpu2DmaSpi.Init.FirstBit            = SPI_FIRSTBIT_MSB;
    cpu2DmaSpi.Init.TIMode              = SPI_TIMODE_DISABLED;
    cpu2DmaSpi.Init.CRCCalculation 		= SPI_CRCCALCULATION_DISABLED;
    cpu2DmaSpi.Init.CRCPolynomial 		= 7;

    HAL_SPI_Init(&cpu2DmaSpi);
}


void MX_GPIO_Backlight_max_static_only_Init(void)
{
    GPIO_InitTypeDef GPIO_InitStruct;
    TIM_BACKLIGHT_GPIO_ENABLE();

    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;//GPIO_PULLUP; /* should be normally high */
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;

    GPIO_InitStruct.Pin = TIM_BACKLIGHT_PIN;
    HAL_GPIO_Init(TIM_BACKLIGHT_GPIO_PORT, &GPIO_InitStruct);

    HAL_GPIO_WritePin(TIM_BACKLIGHT_GPIO_PORT,TIM_BACKLIGHT_PIN,GPIO_PIN_SET);
}


void MX_GPIO_One_Button_only_Init(void)
{
    GPIO_InitTypeDef GPIO_InitStruct;
    BUTTON_NEXT_GPIO_ENABLE();

    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
    GPIO_InitStruct.Pull = GPIO_NOPULL;//GPIO_PULLUP; /* should be normally high */
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;

    GPIO_InitStruct.Pin = BUTTON_NEXT_PIN;
    HAL_GPIO_Init(BUTTON_NEXT_GPIO_PORT, &GPIO_InitStruct);
}


GPIO_PinState MX_GPIO_Read_The_One_Button(void)
{
    return HAL_GPIO_ReadPin(BUTTON_NEXT_GPIO_PORT, BUTTON_NEXT_PIN);
}

void MX_GPIO_Init(void)
{
    GPIO_InitTypeDef GPIO_InitStruct;

    DISPLAY_CSB_GPIO_ENABLE();
    DISPLAY_RESETB_GPIO_ENABLE();
    EXTFLASH_CSB_GPIO_ENABLE();
    SMALLCPU_CSB_GPIO_ENABLE();
    OSCILLOSCOPE_GPIO_ENABLE();
    OSCILLOSCOPE2_GPIO_ENABLE();
    BLE_UBLOX_DSR_GPIO_ENABLE();

    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;

    GPIO_InitStruct.Pin = DISPLAY_CSB_PIN;
    HAL_GPIO_Init(DISPLAY_CSB_GPIO_PORT, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = DISPLAY_RESETB_PIN;
    HAL_GPIO_Init(DISPLAY_RESETB_GPIO_PORT, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = EXTFLASH_CSB_PIN;
    HAL_GPIO_Init(EXTFLASH_CSB_GPIO_PORT, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = OSCILLOSCOPE_PIN;
    HAL_GPIO_Init(OSCILLOSCOPE_GPIO_PORT, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = OSCILLOSCOPE2_PIN;
    HAL_GPIO_Init(OSCILLOSCOPE2_GPIO_PORT, &GPIO_InitStruct);

#ifdef DISPLAY_BACKLIGHT_PIN
    DISPLAY_BACKLIGHT_GPIO_ENABLE();
    GPIO_InitStruct.Pin = DISPLAY_BACKLIGHT_PIN;
    HAL_GPIO_Init(DISPLAY_BACKLIGHT_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(DISPLAY_BACKLIGHT_GPIO_PORT,DISPLAY_BACKLIGHT_PIN,GPIO_PIN_SET);
#endif

#ifdef SMALLCPU_CSB_PIN
    SMALLCPU_CSB_GPIO_ENABLE();
    GPIO_InitStruct.Pin = SMALLCPU_CSB_PIN;
    HAL_GPIO_Init(SMALLCPU_CSB_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_SET);
#endif

#ifdef SMALLCPU_BOOT0_PIN
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    SMALLCPU_BOOT0_GPIO_ENABLE();
    GPIO_InitStruct.Pin = SMALLCPU_BOOT0_PIN;
    HAL_GPIO_Init(SMALLCPU_BOOT0_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(SMALLCPU_BOOT0_GPIO_PORT,SMALLCPU_BOOT0_PIN,GPIO_PIN_RESET);
    GPIO_InitStruct.Pull = GPIO_PULLUP;
#endif

#ifdef IR_HUD_ENABLE_PIN
    IR_HUD_ENABLE_GPIO_ENABLE();
    GPIO_InitStruct.Pin = IR_HUD_ENABLE_PIN;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    HAL_GPIO_Init(IR_HUD_ENABLE_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(IR_HUD_ENABLE_GPIO_PORT,IR_HUD_ENABLE_PIN,GPIO_PIN_SET);
    GPIO_InitStruct.Pull = GPIO_PULLUP;
#endif

#ifdef BLE_NENABLE_PIN
    BLE_NENABLE_GPIO_ENABLE();
    MX_Bluetooth_PowerOff();
#endif

#ifdef TESTPIN
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    TEST_GPIO_ENABLE();
    GPIO_InitStruct.Pin = TEST_PIN;
    HAL_GPIO_Init(TEST_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(TEST_GPIO_PORT,TEST_PIN,GPIO_PIN_SET);
    GPIO_InitStruct.Pull = GPIO_PULLUP;
#endif
}


void MX_TestPin_High(void)
{
#ifdef TESTPIN
    HAL_GPIO_WritePin(TEST_GPIO_PORT,TEST_PIN,GPIO_PIN_SET);
#endif
}


void MX_TestPin_Low(void)
{
#ifdef TESTPIN
    HAL_GPIO_WritePin(TEST_GPIO_PORT,TEST_PIN,GPIO_PIN_RESET);
#endif
}

void MX_Bluetooth_PowerOn(void)
{
    GPIO_InitTypeDef GPIO_InitStruct;
    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
    GPIO_InitStruct.Pin = BLE_NENABLE_PIN;
    HAL_GPIO_Init(BLE_NENABLE_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(BLE_NENABLE_GPIO_PORT,BLE_NENABLE_PIN,GPIO_PIN_RESET);

    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_PULLDOWN;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
    GPIO_InitStruct.Pin = BLE_UBLOX_DSR_PIN;
    HAL_GPIO_Init(BLE_UBLOX_DSR_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(BLE_UBLOX_DSR_GPIO_PORT,BLE_UBLOX_DSR_PIN,GPIO_PIN_RESET);
}


void MX_Bluetooth_PowerOff(void)
{
    GPIO_InitTypeDef GPIO_InitStruct;
    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
    GPIO_InitStruct.Pin = BLE_NENABLE_PIN;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    HAL_GPIO_Init(BLE_NENABLE_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(BLE_UBLOX_DSR_GPIO_PORT,BLE_UBLOX_DSR_PIN,GPIO_PIN_RESET);
}


void MX_SmallCPU_Reset_To_Boot(void)
{
#ifdef SMALLCPU_NRESET_PIN
    GPIO_InitTypeDef GPIO_InitStruct;

    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;

    SMALLCPU_NRESET_GPIO_ENABLE();
    GPIO_InitStruct.Pin = SMALLCPU_NRESET_PIN;
    HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(SMALLCPU_NRESET_GPIO_PORT,SMALLCPU_NRESET_PIN,GPIO_PIN_RESET);
    HAL_GPIO_WritePin(SMALLCPU_BOOT0_GPIO_PORT,SMALLCPU_BOOT0_PIN,GPIO_PIN_SET);
    HAL_Delay(2);
    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
    HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct);
    HAL_Delay(100);
    HAL_GPIO_WritePin(SMALLCPU_BOOT0_GPIO_PORT,SMALLCPU_BOOT0_PIN,GPIO_PIN_RESET);
#endif
}


void MX_SmallCPU_NO_Reset_Helper(void)
{
#ifdef SMALLCPU_NRESET_PIN
    GPIO_InitTypeDef GPIO_InitStruct;

    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;

    SMALLCPU_NRESET_GPIO_ENABLE();
    HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(SMALLCPU_NRESET_GPIO_PORT,SMALLCPU_NRESET_PIN,GPIO_PIN_SET);
//	HAL_Delay(100);
//  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
//  HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct);
#endif
}


void MX_SmallCPU_Reset_To_Standard(void)
{
#ifdef SMALLCPU_NRESET_PIN
    GPIO_InitTypeDef GPIO_InitStruct;

    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;

    SMALLCPU_NRESET_GPIO_ENABLE();
    GPIO_InitStruct.Pin = SMALLCPU_NRESET_PIN;
    HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct);
    HAL_GPIO_WritePin(SMALLCPU_NRESET_GPIO_PORT,SMALLCPU_NRESET_PIN,GPIO_PIN_RESET);
    HAL_GPIO_WritePin(SMALLCPU_BOOT0_GPIO_PORT,SMALLCPU_BOOT0_PIN,GPIO_PIN_RESET);
    HAL_Delay(2);
    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
    HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct);
#endif
}


uint8_t MX_UART_ButtonAdjust(uint8_t *array)
{
#ifdef USART_PIEZO
    uint8_t answer[4];
    HAL_UART_Transmit(&UartPiezoTxHandle,array,4,1000);
    HAL_UART_Receive(&UartPiezoTxHandle,answer,4,2000);
    if(	(answer[0] == array[0])
        &&(answer[1] == array[1])
        &&(answer[2] == array[2])
        &&(answer[3] == array[3]))
    return 1;
#endif
    return 0;
}


void MX_UART_Init(void)
{
  /*##-1- Configure the UART peripheral ######################################*/
  /* Put the USART peripheral in the Asynchronous mode (UART Mode) */
  /* UART1 configured as follow:
      - Word Length = 8 Bits
      - Stop Bit = One Stop bit
      - Parity = None
      - BaudRate = 9600 baud
      - Hardware flow control disabled (RTS and CTS signals) */

#ifdef USARTx_CTS_PIN
    UartHandle.Init.HwFlowCtl  = UART_HWCONTROL_RTS_CTS;
#else
    UartHandle.Init.HwFlowCtl  = UART_HWCONTROL_NONE;
#endif
    UartHandle.Instance        = USARTx;
    UartHandle.Init.BaudRate   = 115200;
    UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
    UartHandle.Init.StopBits   = UART_STOPBITS_1;
    UartHandle.Init.Parity     = UART_PARITY_NONE;
    UartHandle.Init.Mode       = UART_MODE_TX_RX;
    HAL_UART_Init(&UartHandle);

#ifdef USART_PIEZO
    UartPiezoTxHandle.Instance        = USART_PIEZO;
    UartPiezoTxHandle.Init.BaudRate   = 1200;
    UartPiezoTxHandle.Init.WordLength = UART_WORDLENGTH_8B;
    UartPiezoTxHandle.Init.StopBits   = UART_STOPBITS_1;
    UartPiezoTxHandle.Init.Parity     = UART_PARITY_NONE;
    UartPiezoTxHandle.Init.HwFlowCtl  = UART_HWCONTROL_NONE;
    UartPiezoTxHandle.Init.Mode       = UART_MODE_TX_RX;

    HAL_UART_Init(&UartPiezoTxHandle);
#endif

#ifdef USART_IR_HUD
    UartIR_HUD_Handle.Instance        = USART_IR_HUD;
    UartIR_HUD_Handle.Init.BaudRate   = 2400;
    UartIR_HUD_Handle.Init.WordLength = UART_WORDLENGTH_8B;
    UartIR_HUD_Handle.Init.StopBits   = UART_STOPBITS_1;
    UartIR_HUD_Handle.Init.Parity     = UART_PARITY_NONE;
    UartIR_HUD_Handle.Init.HwFlowCtl  = UART_HWCONTROL_NONE;
    UartIR_HUD_Handle.Init.Mode       = UART_MODE_TX_RX;

    HAL_UART_Init(&UartIR_HUD_Handle);
#endif
}

void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
{
    if(huart == &UartHandle)
        UartReady = SET;
}


void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{
    if(huart == &UartHandle)
        UartReady = SET;
    else
    if(huart == &UartIR_HUD_Handle)
    {
#ifndef BOOTLOADER_STANDALONE
    	tCCR_SetRXIndication();
#endif
		UartReadyHUD = SET;
    }
}

void MX_tell_reset_logik_alles_ok(void)
{
#ifdef RESET_LOGIC_ALLES_OK_PIN
    GPIO_InitTypeDef GPIO_InitStruct;

    RESET_LOGIC_ALLES_OK_GPIO_ENABLE();

    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
    GPIO_InitStruct.Pin = RESET_LOGIC_ALLES_OK_PIN;
    HAL_GPIO_Init(RESET_LOGIC_ALLES_OK_GPIO_PORT, &GPIO_InitStruct);

    HAL_GPIO_WritePin(RESET_LOGIC_ALLES_OK_GPIO_PORT,RESET_LOGIC_ALLES_OK_PIN,GPIO_PIN_RESET);
    HAL_Delay(1);
    HAL_GPIO_WritePin(RESET_LOGIC_ALLES_OK_GPIO_PORT,RESET_LOGIC_ALLES_OK_PIN,GPIO_PIN_SET);

    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
    HAL_GPIO_Init(RESET_LOGIC_ALLES_OK_GPIO_PORT, &GPIO_InitStruct);
#endif
}
void SetDisplayVersion(uint8_t version)
{
	if(version < 2)
	{
		hardwareDisplay = version;
	}
}
uint8_t isNewDisplay()
{
	uint8_t ret = 0;
	if(hardwareDisplay == DISPLAY_VERSION_NEW)
	{
		ret = 1;
	}
	return ret;
}

#ifndef BOOTLOADER_STANDALONE
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
{
    if(huart == &UartIR_HUD_Handle)
        tCCR_restart();
}
#endif