view Discovery/Inc/stm32f4xx_hal_conf.h @ 938:df87dbfc9c21
Evo_2_23
Update GPIO:
Splitted the init function and moved GPS deactivation into the sleep loop (deep sleep)
author
Ideenmodellierer
date
Tue, 10 Dec 2024 21:00:55 +0100 (6 weeks ago)
parents
bc6c90e20d9e
children
line source
///////////////////////////////////////////////////////////////////////////////+ −
/// -*- coding: UTF-8 -*-+ −
///+ −
/// \file Discovery/Inc/stm32f4xx_hal_conf.h+ −
/// \brief The assert_param macro is used for function's parameters check.+ −
/// \author Heinrichs Weikamp+ −
/// \date 2018+ −
///+ −
/// $Id$+ −
///////////////////////////////////////////////////////////////////////////////+ −
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh+ −
///+ −
/// This program is free software: you can redistribute it and/or modify+ −
/// it under the terms of the GNU General Public License as published by+ −
/// the Free Software Foundation, either version 3 of the License, or+ −
/// (at your option) any later version.+ −
///+ −
/// This program is distributed in the hope that it will be useful,+ −
/// but WITHOUT ANY WARRANTY; without even the implied warranty of+ −
/// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the+ −
/// GNU General Public License for more details.+ −
///+ −
/// You should have received a copy of the GNU General Public License+ −
/// along with this program. If not, see <http://www.gnu.org/licenses/>.+ −
//////////////////////////////////////////////////////////////////////////////+ −
/// \par COPYRIGHT(c) 2014 STMicroelectronics+ −
///+ −
/// Redistribution and use in source and binary forms, with or without modification,+ −
/// are permitted provided that the following conditions are met:+ −
/// 1. Redistributions of source code must retain the above copyright notice,+ −
/// this list of conditions and the following disclaimer.+ −
/// 2. Redistributions in binary form must reproduce the above copyright notice,+ −
/// this list of conditions and the following disclaimer in the documentation+ −
/// and/or other materials provided with the distribution.+ −
/// 3. Neither the name of STMicroelectronics nor the names of its contributors+ −
/// may be used to endorse or promote products derived from this software+ −
/// without specific prior written permission.+ −
///+ −
/// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+ −
/// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+ −
/// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+ −
/// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+ −
/// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+ −
/// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+ −
/// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+ −
/// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+ −
/// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+ −
/// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+ −
//////////////////////////////////////////////////////////////////////////////+ −
+ −
/* Define to prevent recursive inclusion -------------------------------------*/+ −
#ifndef STM32F4xx_HAL_CONF_H+ −
#define STM32F4xx_HAL_CONF_H+ −
+ −
/* Exported constants --------------------------------------------------------*/+ −
+ −
/* ######################### Hardware Selection ############################## */+ −
/* #define STM32F429xx definition is now done in preprocessor*/+ −
+ −
/* ########################## Module Selection ############################## */+ −
/**+ −
* @brief This is the list of modules to be used in the HAL driver+ −
*/+ −
#define HAL_MODULE_ENABLED+ −
//#define HAL_ADC_MODULE_ENABLED+ −
//#define HAL_CAN_MODULE_ENABLED+ −
//#define HAL_CRC_MODULE_ENABLED+ −
//#define HAL_CRYP_MODULE_ENABLED+ −
//#define HAL_DAC_MODULE_ENABLED+ −
//#define HAL_DCMI_MODULE_ENABLED+ −
//#define HAL_ETH_MODULE_ENABLED+ −
//#define HAL_NAND_MODULE_ENABLED+ −
//#define HAL_NOR_MODULE_ENABLED+ −
//#define HAL_PCCARD_MODULE_ENABLED+ −
//#define HAL_SRAM_MODULE_ENABLED+ −
//#define HAL_HASH_MODULE_ENABLED+ −
//#define HAL_I2C_MODULE_ENABLED+ −
//#define HAL_I2S_MODULE_ENABLED+ −
//#define HAL_IWDG_MODULE_ENABLED+ −
//#define HAL_RNG_MODULE_ENABLED+ −
//#define HAL_SAI_MODULE_ENABLED+ −
//#define HAL_SD_MODULE_ENABLED+ −
//#define HAL_USART_MODULE_ENABLED+ −
//#define HAL_IRDA_MODULE_ENABLED+ −
//#define HAL_SMARTCARD_MODULE_ENABLED+ −
#ifdef BOOTLOADER_STANDALONE+ −
#define HAL_WWDG_MODULE_ENABLED+ −
#endif+ −
//#define HAL_PCD_MODULE_ENABLED+ −
//#define HAL_HCD_MODULE_ENABLED+ −
#define HAL_SDRAM_MODULE_ENABLED+ −
#define HAL_GPIO_MODULE_ENABLED+ −
#define HAL_LTDC_MODULE_ENABLED+ −
#define HAL_DMA_MODULE_ENABLED+ −
#define HAL_DMA2D_MODULE_ENABLED+ −
#define HAL_RCC_MODULE_ENABLED+ −
#define HAL_RTC_MODULE_ENABLED+ −
#define HAL_SPI_MODULE_ENABLED+ −
#define HAL_TIM_MODULE_ENABLED+ −
#define HAL_UART_MODULE_ENABLED+ −
#define HAL_FLASH_MODULE_ENABLED+ −
#define HAL_PWR_MODULE_ENABLED+ −
#define HAL_CORTEX_MODULE_ENABLED+ −
+ −
/* ########################## HSE/HSI Values adaptation ##################### */+ −
/**+ −
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.+ −
* This value is used by the RCC HAL module to compute the system frequency+ −
* (when HSE is used as system clock source, directly or through the PLL).+ −
*/+ −
#if !defined (HSE_VALUE)+ −
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */+ −
#endif /* HSE_VALUE */+ −
+ −
#if !defined (HSE_STARTUP_TIMEOUT)+ −
#define HSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for HSE start up, in ms */+ −
#endif /* HSE_STARTUP_TIMEOUT */+ −
+ −
/**+ −
* @brief Internal High Speed oscillator (HSI) value.+ −
* This value is used by the RCC HAL module to compute the system frequency+ −
* (when HSI is used as system clock source, directly or through the PLL).+ −
*/+ −
#if !defined (HSI_VALUE)+ −
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/+ −
#endif /* HSI_VALUE */+ −
+ −
/**+ −
* @brief Internal Low Speed oscillator (LSI) value.+ −
*/+ −
#if !defined (LSI_VALUE)+ −
#define LSI_VALUE ((uint32_t)40000U)+ −
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz+ −
The real value may vary depending on the variations+ −
in voltage and temperature. */+ −
/**+ −
* @brief External Low Speed oscillator (LSE) value.+ −
*/+ −
#if !defined (LSE_VALUE)+ −
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */+ −
#endif /* LSE_VALUE */+ −
+ −
#if !defined (LSE_STARTUP_TIMEOUT)+ −
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */+ −
#endif /* LSE_STARTUP_TIMEOUT */+ −
+ −
/**+ −
* @brief External clock source for I2S peripheral+ −
* This value is used by the I2S HAL module to compute the I2S clock source+ −
* frequency, this source is inserted directly through I2S_CKIN pad.+ −
*/+ −
#if !defined (EXTERNAL_CLOCK_VALUE)+ −
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/+ −
#endif /* EXTERNAL_CLOCK_VALUE */+ −
+ −
/* Tip: To avoid modifying this file each time you need to use different HSE,+ −
=== you can define the HSE value in your toolchain compiler preprocessor. */+ −
+ −
/* ########################### System Configuration ######################### */+ −
/**+ −
* @brief This is the HAL system configuration section+ −
*/+ −
+ −
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */+ −
#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */+ −
#define USE_RTOS 0+ −
#define PREFETCH_ENABLE 1+ −
#define INSTRUCTION_CACHE_ENABLE 1+ −
#define DATA_CACHE_ENABLE 1+ −
+ −
/* ########################## Assert Selection ############################## */+ −
/**+ −
* @brief Uncomment the line below to expanse the "assert_param" macro in the+ −
* HAL drivers code+ −
*/+ −
/* #define USE_FULL_ASSERT 1 */+ −
+ −
/* ################## Ethernet peripheral configuration ##################### */+ −
+ −
/* Section 1 : Ethernet peripheral configuration */+ −
+ −
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */+ −
#define MAC_ADDR0 2U+ −
#define MAC_ADDR1 0U+ −
#define MAC_ADDR2 0U+ −
#define MAC_ADDR3 0U+ −
#define MAC_ADDR4 0U+ −
#define MAC_ADDR5 0U+ −
+ −
/* Definition of the Ethernet driver buffers size and count */+ −
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */+ −
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */+ −
#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */+ −
#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */+ −
+ −
/* Section 2: PHY configuration section */+ −
+ −
/* DP83848 PHY Address*/+ −
#define DP83848_PHY_ADDRESS 0x01U+ −
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/+ −
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)+ −
/* PHY Configuration delay */+ −
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)+ −
+ −
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)+ −
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)+ −
+ −
/* Section 3: Common PHY Registers */+ −
+ −
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */+ −
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */+ −
+ −
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */+ −
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */+ −
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */+ −
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */+ −
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */+ −
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */+ −
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */+ −
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */+ −
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */+ −
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */+ −
+ −
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */+ −
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */+ −
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */+ −
+ −
/* Section 4: Extended PHY Registers */+ −
+ −
#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */+ −
#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */+ −
#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */+ −
+ −
#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */+ −
#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */+ −
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */+ −
+ −
#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */+ −
#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */+ −
+ −
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */+ −
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */+ −
+ −
/* Includes ------------------------------------------------------------------*/+ −
/**+ −
* @brief Include module's header file+ −
*/+ −
+ −
#ifdef HAL_RCC_MODULE_ENABLED+ −
#include "stm32f4xx_hal_rcc.h"+ −
#endif /* HAL_RCC_MODULE_ENABLED */+ −
+ −
#ifdef HAL_GPIO_MODULE_ENABLED+ −
#include "stm32f4xx_hal_gpio.h"+ −
#endif /* HAL_GPIO_MODULE_ENABLED */+ −
+ −
#ifdef HAL_DMA_MODULE_ENABLED+ −
#include "stm32f4xx_hal_dma.h"+ −
#endif /* HAL_DMA_MODULE_ENABLED */+ −
+ −
#ifdef HAL_CORTEX_MODULE_ENABLED+ −
#include "stm32f4xx_hal_cortex.h"+ −
#endif /* HAL_CORTEX_MODULE_ENABLED */+ −
+ −
#ifdef HAL_ADC_MODULE_ENABLED+ −
#include "stm32f4xx_hal_adc.h"+ −
#endif /* HAL_ADC_MODULE_ENABLED */+ −
+ −
#ifdef HAL_CAN_MODULE_ENABLED+ −
#include "stm32f4xx_hal_can.h"+ −
#endif /* HAL_CAN_MODULE_ENABLED */+ −
+ −
#ifdef HAL_CRC_MODULE_ENABLED+ −
#include "stm32f4xx_hal_crc.h"+ −
#endif /* HAL_CRC_MODULE_ENABLED */+ −
+ −
#ifdef HAL_CRYP_MODULE_ENABLED+ −
#include "stm32f4xx_hal_cryp.h"+ −
#endif /* HAL_CRYP_MODULE_ENABLED */+ −
+ −
#ifdef HAL_DMA2D_MODULE_ENABLED+ −
#include "stm32f4xx_hal_dma2d.h"+ −
#endif /* HAL_DMA2D_MODULE_ENABLED */+ −
+ −
#ifdef HAL_DAC_MODULE_ENABLED+ −
#include "stm32f4xx_hal_dac.h"+ −
#endif /* HAL_DAC_MODULE_ENABLED */+ −
+ −
#ifdef HAL_DCMI_MODULE_ENABLED+ −
#include "stm32f4xx_hal_dcmi.h"+ −
#endif /* HAL_DCMI_MODULE_ENABLED */+ −
+ −
#ifdef HAL_ETH_MODULE_ENABLED+ −
#include "stm32f4xx_hal_eth.h"+ −
#endif /* HAL_ETH_MODULE_ENABLED */+ −
+ −
#ifdef HAL_FLASH_MODULE_ENABLED+ −
#include "stm32f4xx_hal_flash.h"+ −
#endif /* HAL_FLASH_MODULE_ENABLED */+ −
+ −
#ifdef HAL_SRAM_MODULE_ENABLED+ −
#include "stm32f4xx_hal_sram.h"+ −
#endif /* HAL_SRAM_MODULE_ENABLED */+ −
+ −
#ifdef HAL_NOR_MODULE_ENABLED+ −
#include "stm32f4xx_hal_nor.h"+ −
#endif /* HAL_NOR_MODULE_ENABLED */+ −
+ −
#ifdef HAL_NAND_MODULE_ENABLED+ −
#include "stm32f4xx_hal_nand.h"+ −
#endif /* HAL_NAND_MODULE_ENABLED */+ −
+ −
#ifdef HAL_PCCARD_MODULE_ENABLED+ −
#include "stm32f4xx_hal_pccard.h"+ −
#endif /* HAL_PCCARD_MODULE_ENABLED */+ −
+ −
#ifdef HAL_SDRAM_MODULE_ENABLED+ −
#include "stm32f4xx_hal_sdram.h"+ −
#endif /* HAL_SDRAM_MODULE_ENABLED */+ −
+ −
#ifdef HAL_HASH_MODULE_ENABLED+ −
#include "stm32f4xx_hal_hash.h"+ −
#endif /* HAL_HASH_MODULE_ENABLED */+ −
+ −
#ifdef HAL_I2C_MODULE_ENABLED+ −
#include "stm32f4xx_hal_i2c.h"+ −
#endif /* HAL_I2C_MODULE_ENABLED */+ −
+ −
#ifdef HAL_I2S_MODULE_ENABLED+ −
#include "stm32f4xx_hal_i2s.h"+ −
#endif /* HAL_I2S_MODULE_ENABLED */+ −
+ −
#ifdef HAL_IWDG_MODULE_ENABLED+ −
#include "stm32f4xx_hal_iwdg.h"+ −
#endif /* HAL_IWDG_MODULE_ENABLED */+ −
+ −
#ifdef HAL_LTDC_MODULE_ENABLED+ −
#include "stm32f4xx_hal_ltdc.h"+ −
#endif /* HAL_LTDC_MODULE_ENABLED */+ −
+ −
#ifdef HAL_PWR_MODULE_ENABLED+ −
#include "stm32f4xx_hal_pwr.h"+ −
#endif /* HAL_PWR_MODULE_ENABLED */+ −
+ −
#ifdef HAL_RNG_MODULE_ENABLED+ −
#include "stm32f4xx_hal_rng.h"+ −
#endif /* HAL_RNG_MODULE_ENABLED */+ −
+ −
#ifdef HAL_RTC_MODULE_ENABLED+ −
#include "stm32f4xx_hal_rtc.h"+ −
#endif /* HAL_RTC_MODULE_ENABLED */+ −
+ −
#ifdef HAL_SAI_MODULE_ENABLED+ −
#include "stm32f4xx_hal_sai.h"+ −
#endif /* HAL_SAI_MODULE_ENABLED */+ −
+ −
#ifdef HAL_SD_MODULE_ENABLED+ −
#include "stm32f4xx_hal_sd.h"+ −
#endif /* HAL_SD_MODULE_ENABLED */+ −
+ −
#ifdef HAL_SPI_MODULE_ENABLED+ −
#include "stm32f4xx_hal_spi.h"+ −
#endif /* HAL_SPI_MODULE_ENABLED */+ −
+ −
#ifdef HAL_TIM_MODULE_ENABLED+ −
#include "stm32f4xx_hal_tim.h"+ −
#endif /* HAL_TIM_MODULE_ENABLED */+ −
+ −
#ifdef HAL_UART_MODULE_ENABLED+ −
#include "stm32f4xx_hal_uart.h"+ −
#endif /* HAL_UART_MODULE_ENABLED */+ −
+ −
#ifdef HAL_USART_MODULE_ENABLED+ −
#include "stm32f4xx_hal_usart.h"+ −
#endif /* HAL_USART_MODULE_ENABLED */+ −
+ −
#ifdef HAL_IRDA_MODULE_ENABLED+ −
#include "stm32f4xx_hal_irda.h"+ −
#endif /* HAL_IRDA_MODULE_ENABLED */+ −
+ −
#ifdef HAL_SMARTCARD_MODULE_ENABLED+ −
#include "stm32f4xx_hal_smartcard.h"+ −
#endif /* HAL_SMARTCARD_MODULE_ENABLED */+ −
+ −
#ifdef HAL_WWDG_MODULE_ENABLED+ −
#include "stm32f4xx_hal_wwdg.h"+ −
#endif /* HAL_WWDG_MODULE_ENABLED */+ −
+ −
#ifdef HAL_PCD_MODULE_ENABLED+ −
#include "stm32f4xx_hal_pcd.h"+ −
#endif /* HAL_PCD_MODULE_ENABLED */+ −
+ −
#ifdef HAL_HCD_MODULE_ENABLED+ −
#include "stm32f4xx_hal_hcd.h"+ −
#endif /* HAL_HCD_MODULE_ENABLED */+ −
+ −
/* Exported macro ------------------------------------------------------------*/+ −
#ifdef USE_FULL_ASSERT+ −
/**+ −
* @brief The assert_param macro is used for function's parameters check.+ −
* @param expr: If expr is false, it calls assert_failed function+ −
* which reports the name of the source file and the source+ −
* line number of the call that failed.+ −
* If expr is true, it returns no value.+ −
* @retval None+ −
*/+ −
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))+ −
/* Exported functions ------------------------------------------------------- */+ −
void assert_failed(uint8_t* file, uint32_t line);+ −
#else+ −
#define assert_param(expr) ((void)0)+ −
#endif /* USE_FULL_ASSERT */+ −
+ −
#endif /* STM32F4xx_HAL_CONF_H */+ −