Mercurial > public > ostc4
view wiki/Make Firmware File.md @ 747:df0d43da1614
Added pressure compensation to CO2 detection:
A pressure compensation is needed if the ExplorIR shall be used under extended pressure conditions. The procedure recommended by the application note has been integrated. To keep things simple the focus of the CO2 measurement is not the precision, as it is needed for the decompression calculation, but the indication of a critical increase of CO2 in the breathing loop. That's why only a lookup table with 1000ppm steps has been implemented instead of calculating the polynom for every measurement.
| author | Ideenmodellierer |
|---|---|
| date | Sun, 05 Mar 2023 22:06:47 +0100 |
| parents | 0e7c16dd774d |
| children |
line wrap: on
line source
# How to Make an Uploadable Firmware File for the OSTC4 # Generated BIN files from the SMT32 Workbench need modification in order to be installed via the OSTC Companion onto the OSTC4. ## Build Command Line Tools ## These can be found in /ostc4pack (For Windows, CPP sources available) ## Run the Tools Manually ## 1. Copy generated BIN files (From the Release or debug directory) into /ostc4pack. Or: Modify .bat files to point to your Release or debug directory. 2. run step1_create_OSTC_RTE_upload.bat and/or step1_create_OSTC4_firmware_upload_bin.bat (Depending on which part you made changes) 3. run step2_create_OSTC4update_bin.bat to create final OSTC4update_xxxxxx.bin, with xxxxxx being the current date in YYMMDD format. This will add important checksums required for the OSTC4's bootloader to accept the file. ## Upload this file with the OSTC Companion software to the OSTC4 ## See http://forum.heinrichsweikamp.com/read.php?7,19186 on how to get and use the "OSTC companion"