Mercurial > public > ostc4
view Discovery/Src/firmwareJumpToApplication.c @ 805:dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
This can be used to time safety stops, or to prebreathe a CCR (or to boil your breakfast eggs if you are so inclined). The duration of the timer is configurable from 1 second to 9:59 minutes in the System menu.
The timer is started by switching to the custom view, and remaining on it until a 10 second delay has elapsed. Once the timer has started the custom view can be changed and the timer will continue running in the background.
After the timer has run out 'Finished' will be shown for 10 seconds in the timer custom view, and then automatic switching of custom views (if configured) resumes.
In surface mode the dive computer will not go to sleep while the timer is running, and a mini timer will be shown when the timer custom view is not showing. (mikeller)
| author | heinrichsweikamp |
|---|---|
| date | Mon, 21 Aug 2023 17:20:07 +0200 |
| parents | 5f11787b4f42 |
| children |
line wrap: on
line source
/** ****************************************************************************** * @file firmwareJumpToApplication.c * @author heinrichs weikamp gmbh * @version V0.0.1 * @date 05-May-2015 * @version V0.0.1 * @since 05-May-2015 * @brief jump to application in higher flash region * @verbatim ============================================================================== ##### How to use ##### ============================================================================== ============================================================================== ##### From AN2557 ##### STM32F10xxx In-Application programming CD00161640.pdf 2010 ============================================================================== User program conditions The user application to be loaded into the Flash memory using IAP should be built with these configuration settings: 1. Set the program load address at 0x08003000, using your toolchain linker file 2. Relocate the vector table at address 0x08003000, using the "NVIC_SetVectorTable"function or the VECT_TAB_OFFSET definition inside the "system_stm32f10x.c" can be found here system_stm32f4xx.c @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" #include "stdio.h" #include "firmwareJumpToApplication.h" /* Exported variables --------------------------------------------------------*/ /* Private types -------------------------------------------------------------*/ typedef void (*pFunction)(void); #define ApplicationAddress 0x08040000 /* Private variables ---------------------------------------------------------*/ pFunction Jump_To_Application; uint32_t JumpAddress; /* Private function prototypes -----------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ uint8_t firmware_MainCodeIsProgammed(void) { uint32_t content_start; content_start = *(__IO uint32_t*)ApplicationAddress; if ((content_start & 0x2FFE0000 ) == 0x20000000) return 1; else return 0; } void firmware_JumpTo_Application(void) { /* Test if user code is programmed starting from address "ApplicationAddress" */ if (((*(__IO uint32_t*)ApplicationAddress) & 0x2FFE0000 ) == 0x20000000) { /* Jump to user application */ JumpAddress = *(__IO uint32_t*) (ApplicationAddress + 4); Jump_To_Application = (pFunction) JumpAddress; /* Initialize user application's Stack Pointer */ __set_MSP(*(__IO uint32_t*) ApplicationAddress); Jump_To_Application(); } while (1) {} } /* Private functions ---------------------------------------------------------*/