Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 744:dd5db6e2c9a4
Added DiveO2 fatal error detection:
The digital sensor provides status information which are now considered in the sanity check for sensor values. The behavior in case of an error is the same as if an analog sensor would provide a out of bounce voltage.
author | Ideenmodellierer |
---|---|
date | Sun, 19 Feb 2023 21:51:19 +0100 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit