Mercurial > public > ostc4

view Small_CPU/Src/uartProtocol_O2.c @ 831:da632300e7d4 Evo_2_23

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Activated work gas for (p)scr mode: In previous version setting of change depth for work (travel) gases was not possible. For (p)scr operation this is not possible. Work gases will not be considered for deco calculation. In addition the first gas will be handled as "deco" gas. This allows switching back to the first gas in case the current gas becomes no longer breathable (ppo2 low).
author Ideenmodellierer
date Thu, 16 Nov 2023 20:36:35 +0100
parents f8a112c5e71d
children 4832981f9af8
line wrap: on
line source

/**
  ******************************************************************************
  * @file    uartProtocol_O2.c
  * @author  heinrichs weikamp gmbh
  * @version V0.0.1
  * @date    16-Jun-2023
  * @brief   Interface functionality to external, UART based O2 sensors
  *
  @verbatim


  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2023 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */
/* Includes ------------------------------------------------------------------*/

#include <string.h>
#include "uart.h"
#include "uartProtocol_O2.h"
#include "externalInterface.h"


const  uint8_t errorStr[] = "#ERRO";
static uint32_t lastReceiveTick = 0;
static uartO2RxState_t rxState = O2RX_IDLE;
static uint8_t digO2Connected = 0;						/* Binary indicator if a sensor is connected or not */
static SSensorDataDiveO2 tmpSensorDataDiveO2;			/* intermediate storage for additional sensor data */

static uint8_t activeSensor = 0;
static uint8_t respondErrorDetected = 0;

void uartO2_InitData()
{
	  digO2Connected = 0;
}

void uartO2_SetupCmd(uint8_t O2State, uint8_t *cmdString, uint8_t *cmdLength)
{
	switch (O2State)
	{
		case UART_O2_CHECK:		*cmdLength = snprintf((char*)cmdString, 10, "#LOGO");
			break;
		case UART_O2_REQ_INFO: 	*cmdLength = snprintf((char*)cmdString, 10, "#VERS");
					break;
		case UART_O2_REQ_ID: 	*cmdLength = snprintf((char*)cmdString, 10, "#IDNR");
			break;
		case UART_O2_REQ_O2: 	*cmdLength = snprintf((char*)cmdString, 10, "#DOXY");
			break;
		case UART_O2_REQ_RAW:	*cmdLength = snprintf((char*)cmdString, 10, "#DRAW");
			break;
		default: *cmdLength = 0;
			break;
	}
	if(*cmdLength != 0)
	{
		cmdString[*cmdLength] = 0x0D;
		*cmdLength = *cmdLength + 1;
		cmdString[*cmdLength] = 0x0A;
		*cmdLength = *cmdLength + 1;
		cmdString[*cmdLength] = 0;
		*cmdLength = *cmdLength + 1;
	}
}

static uint8_t cmdLength = 0;
static uint8_t cmdString[10];

void uartO2_Control(void)
{
	static uint8_t lastComState = 0;
	static uint8_t lastActiveSensor = 0xFF;

	uint8_t activeSensor = externalInterface_GetActiveUartSensor();

	uartO2Status_t localComState = externalInterface_GetSensorState(activeSensor + EXT_INTERFACE_MUX_OFFSET);
	externalInterface_GetSensorData(activeSensor + EXT_INTERFACE_MUX_OFFSET, (uint8_t*)&tmpSensorDataDiveO2);


	if(lastActiveSensor != activeSensor)
	{
		lastActiveSensor = activeSensor;
		if(localComState != UART_O2_ERROR)
		{
			lastComState = localComState;
		}
		else
		{
			lastComState = UART_O2_IDLE;
		}
		if(localComState == UART_O2_CHECK)
		{
			localComState = UART_O2_IDLE;
		}
		UART_FlushRxBuffer();
	}

	if(localComState == UART_O2_INIT)
	{
		memset((char*) &tmpSensorDataDiveO2, 0, sizeof(tmpSensorDataDiveO2));
		externalInterface_SetSensorData(0xFF,(uint8_t*)&tmpSensorDataDiveO2);

		localComState = UART_O2_CHECK;
		lastComState = UART_O2_CHECK;
		uartO2_SetupCmd(localComState,cmdString,&cmdLength);

		rxState = O2RX_CONFIRM;
		respondErrorDetected = 0;
		digO2Connected = 0;

		UART_StartDMA_Receiption();
	}
	else
	{
		if(localComState == UART_O2_ERROR)
		{
			localComState = lastComState;
		}
		lastComState = localComState;
		if(localComState == UART_O2_IDLE)							/* cyclic request of o2 value */
		{
			if((activeSensor != MAX_MUX_CHANNEL) && (tmpSensorDataDiveO2.sensorId == 0))
			{
				localComState = UART_O2_REQ_ID;
			}
			else
			{
				localComState = UART_O2_REQ_RAW;
			}
		}
		rxState = O2RX_CONFIRM;
		uartO2_SetupCmd(localComState,cmdString,&cmdLength);
		UART_SendCmdString(cmdString);
	}
	externalInterface_SetSensorState(activeSensor + EXT_INTERFACE_MUX_OFFSET,localComState);
}

void uartO2_ProcessData(uint8_t data)
{
	static uint8_t cmdReadIndex = 0;
	static uint8_t errorReadIndex = 0;
	static char tmpRxBuf[30];
	static uint8_t tmpRxIdx = 0;

	uint32_t tmpO2 = 0;
	uint32_t tmpData = 0;

	uint32_t tick =  HAL_GetTick();

	uartO2Status_t localComState = externalInterface_GetSensorState(activeSensor + EXT_INTERFACE_MUX_OFFSET);

	lastReceiveTick = tick;
	switch(rxState)
	{
		case O2RX_CONFIRM:	if(data == '#')
							{
								cmdReadIndex = 0;
								errorReadIndex = 0;
							}
							if(errorReadIndex < sizeof(errorStr)-1)
							{
								if(data == errorStr[errorReadIndex])
								{
									errorReadIndex++;
								}
								else
								{
									errorReadIndex = 0;
								}
							}
							else
							{
								respondErrorDetected = 1;
								errorReadIndex = 0;
								if(localComState != UART_O2_IDLE)
								{
									localComState = UART_O2_ERROR;
								}
							}
							if(data == cmdString[cmdReadIndex])
							{
								cmdReadIndex++;
								if(cmdReadIndex == cmdLength - 3)
								{
									errorReadIndex = 0;
									if((activeSensor == MAX_MUX_CHANNEL))
									{
										if(respondErrorDetected)
										{
											digO2Connected = 0;		/* the multiplexer mirrors the incoming message and does not generate an error information => no mux connected */
										}
										else
										{
											digO2Connected = 1;
										}
									}
									else							/* handle sensors which should respond with an error message after channel switch */
									{
										digO2Connected = 1;
									}
									tmpRxIdx = 0;
									memset((char*) tmpRxBuf, 0, sizeof(tmpRxBuf));
									cmdReadIndex = 0;
									switch (localComState)
									{
											case UART_O2_CHECK:	localComState = UART_O2_IDLE;
																rxState = O2RX_IDLE;
												break;
											case UART_O2_REQ_ID: rxState = O2RX_GETNR;
												break;
											case UART_O2_REQ_INFO: rxState = O2RX_GETTYPE;
												break;
											case UART_O2_REQ_RAW:
											case UART_O2_REQ_O2:	rxState = O2RX_GETO2;
												break;
											default:	localComState = UART_O2_IDLE;
														rxState = O2RX_IDLE;
													break;
									}
								}
							}
							else
							{
								cmdReadIndex = 0;
							}
				break;

			case O2RX_GETSTATUS:
			case O2RX_GETTEMP:
			case O2RX_GETTYPE:
			case O2RX_GETVERSION:
			case O2RX_GETCHANNEL:
			case O2RX_GETSUBSENSORS:
			case O2RX_GETO2:
			case O2RX_GETNR:
			case O2RX_GETDPHI:
			case O2RX_INTENSITY:
			case O2RX_AMBIENTLIGHT:
			case O2RX_PRESSURE:
			case O2RX_HUMIDITY:
								if(data != 0x0D)
								{
									if(data != ' ')		/* the following data entities are placed within the data stream => no need to store data at the end */
									{
										tmpRxBuf[tmpRxIdx++] = data;
									}
									else
									{
										if(tmpRxIdx != 0)
										{
											switch(rxState)
											{
												case O2RX_GETCHANNEL:	StringToInt(tmpRxBuf,&tmpData);
																		rxState = O2RX_GETVERSION;
														break;
												case O2RX_GETVERSION:	StringToInt(tmpRxBuf,&tmpData);
																		rxState = O2RX_GETSUBSENSORS;
														break;
												case O2RX_GETTYPE: 		StringToInt(tmpRxBuf,&tmpData);
																		rxState = O2RX_GETCHANNEL;
														break;

												case O2RX_GETO2: 		StringToInt(tmpRxBuf,&tmpO2);

																		setExternalInterfaceChannel(activeSensor + EXT_INTERFACE_MUX_OFFSET,(float)(tmpO2 / 10000.0));
																		rxState = O2RX_GETTEMP;
													break;
												case O2RX_GETTEMP:		StringToInt(tmpRxBuf,(uint32_t*)&tmpSensorDataDiveO2.temperature);
																		rxState = O2RX_GETSTATUS;
													break;
												case O2RX_GETSTATUS:	StringToInt(tmpRxBuf,&tmpSensorDataDiveO2.status);				/* raw data cycle */
																		rxState = O2RX_GETDPHI;
													break;
												case O2RX_GETDPHI:		/* ignored to save memory and most likly irrelevant for diver */
																		rxState = O2RX_INTENSITY;
																									break;
												case O2RX_INTENSITY:	StringToInt(tmpRxBuf,(uint32_t*)&tmpSensorDataDiveO2.intensity);				/* raw data cycle */
																		rxState = O2RX_AMBIENTLIGHT;
																									break;
												case O2RX_AMBIENTLIGHT:	StringToInt(tmpRxBuf,(uint32_t*)&tmpSensorDataDiveO2.ambient);				/* raw data cycle */
																		rxState = O2RX_PRESSURE;
																									break;
												case O2RX_PRESSURE:	StringToInt(tmpRxBuf,(uint32_t*)&tmpSensorDataDiveO2.pressure);					/* raw data cycle */
																		rxState = O2RX_HUMIDITY;
																									break;
												default:
													break;
											}
											memset((char*) tmpRxBuf, 0, tmpRxIdx);
											tmpRxIdx = 0;
										}
									}
								}
								else
								{							/* the following data items are the last of a sensor respond => store temporal data */
									switch (rxState)
									{
										case O2RX_GETSTATUS:		StringToInt(tmpRxBuf,&tmpSensorDataDiveO2.status);
																	externalInterface_SetSensorData(activeSensor + EXT_INTERFACE_MUX_OFFSET,(uint8_t*)&tmpSensorDataDiveO2);
																	localComState = UART_O2_IDLE;
																	rxState = O2RX_IDLE;
												break;
										case O2RX_GETSUBSENSORS:	StringToInt(tmpRxBuf,&tmpData);
										localComState = UART_O2_IDLE;
																	rxState = O2RX_IDLE;
												break;
										case O2RX_HUMIDITY:			StringToInt(tmpRxBuf,(uint32_t*)&tmpSensorDataDiveO2.humidity);				/* raw data cycle */
																	externalInterface_SetSensorData(activeSensor + EXT_INTERFACE_MUX_OFFSET,(uint8_t*)&tmpSensorDataDiveO2);
																	localComState = UART_O2_IDLE;
																	rxState = O2RX_IDLE;
												break;
										case  O2RX_GETNR: 			StringToUInt64((char*)tmpRxBuf,&tmpSensorDataDiveO2.sensorId);
																	externalInterface_SetSensorData(activeSensor + EXT_INTERFACE_MUX_OFFSET,(uint8_t*)&tmpSensorDataDiveO2);
																	localComState = UART_O2_IDLE;
																	rxState = O2RX_IDLE;
											break;
										default:		localComState = UART_O2_IDLE;
														rxState = O2RX_IDLE;
											break;
									}
								}
					break;
			default:				rxState = O2RX_IDLE;
				break;

	}
	externalInterface_SetSensorState(activeSensor + EXT_INTERFACE_MUX_OFFSET,localComState);
}


uint8_t uartO2_isSensorConnected()
{
	return digO2Connected;
}

void uartO2_SetChannel(uint8_t channel)
{
	if(channel <= MAX_MUX_CHANNEL)
	{
		activeSensor = channel;
	}
}