Mercurial > public > ostc4
view Discovery/Src/tCCR.c @ 539:d784f281833a
Added inertia simulation for compass heading:
In previous version calculated compass values were directly used for visualization of the compass. This causes a fast changing (jumping) of values. With the inertia introduction the compass behalfs more like an analog compass. The final value is reached slowly and the displayed values are more stable.
For configuration a new menu item has been added to the compass menu allowing to switch inertia off (default), small and large inertia simulation
author | Ideenmodellierer |
---|---|
date | Sat, 10 Oct 2020 16:59:18 +0200 |
parents | 4bd01f48c285 |
children | d97f0e395058 |
line wrap: on
line source
/////////////////////////////////////////////////////////////////////////////// /// -*- coding: UTF-8 -*- /// /// \file Discovery/Src/tCCR.c /// \brief HUD data via optical port /// \author Heinrichs Weikamp gmbh /// \date 18-Dec-2014 /// /// \details /// /// $Id$ /////////////////////////////////////////////////////////////////////////////// /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh /// /// This program is free software: you can redistribute it and/or modify /// it under the terms of the GNU General Public License as published by /// the Free Software Foundation, either version 3 of the License, or /// (at your option) any later version. /// /// This program is distributed in the hope that it will be useful, /// but WITHOUT ANY WARRANTY; without even the implied warranty of /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the /// GNU General Public License for more details. /// /// You should have received a copy of the GNU General Public License /// along with this program. If not, see <http://www.gnu.org/licenses/>. ////////////////////////////////////////////////////////////////////////////// /* Includes ------------------------------------------------------------------*/ #include <string.h> #include "tCCR.h" #include "ostc.h" #include "data_central.h" #include "data_exchange.h" #include "check_warning.h" #include "configuration.h" /* Private types -------------------------------------------------------------*/ typedef struct { uint8_t hud_firmwareVersion; bit8_Type status_byte; uint16_t sensor_voltage_100uV[3]; uint8_t sensor_ppo2_cbar[3]; uint8_t temp1; uint16_t battery_voltage_mV; uint16_t checksum; } SIrLink; #define HUD_BABBLING_IDIOT (30u) /* 30 Bytes received without break */ #define HUD_RX_FRAME_LENGTH (15u) /* Length of a HUD data frame */ #define HUD_RX_FRAME_BREAK_MS (100u) /* Time used to detect a gap between two byte receptions => frame start */ #define HUD_RX_START_DELAY_MS (500u) /* Delay for start of RX function to avoid start of reception while a transmission is ongoing. */ /* Based on an assumed cycle time by the sensor of 1 second. Started at time of last RX */ #define BOTTLE_SENSOR_TIMEOUT (6000u) /* signal pressure budget as not received after 10 minutes (6000 * 100ms) */ /* Private variables ---------------------------------------------------------*/ static SIrLink receiveHUD[2]; static uint8_t boolHUDdata = 0; static uint8_t data_old__lost_connection_to_HUD = 1; static uint8_t receiveHUDraw[16]; static uint8_t StartListeningToUART_HUD = 0; static uint16_t HUDTimeoutCount = 0; static __IO ITStatus UartReadyHUD = RESET; static uint32_t LastReceivedTick_HUD = 0; /* Private variables with external access via get_xxx() function -------------*/ /* Private function prototypes -----------------------------------------------*/ static void tCCR_fallbackToFixedSetpoint(void); #ifndef USART_IR_HUD void tCCR_init(void) { } void tCCR_control(void) { } void tCCR_test(void) { } void tCCR_restart(void) { } float get_ppO2Sensor_bar(uint8_t sensor_id) { } float get_sensorVoltage_mV(uint8_t sensor_id) { } float get_HUD_battery_voltage_V(void) { } void tCCR_tick(void) { } #else /* Exported functions --------------------------------------------------------*/ float get_ppO2Sensor_bar(uint8_t sensor_id) { if((sensor_id > 2) || data_old__lost_connection_to_HUD) return 0; return (float)(receiveHUD[boolHUDdata].sensor_ppo2_cbar[sensor_id]) / 100.0f; } float get_sensorVoltage_mV(uint8_t sensor_id) { if((sensor_id > 2) || data_old__lost_connection_to_HUD) return 0; return (float)(receiveHUD[boolHUDdata].sensor_voltage_100uV[sensor_id]) / 10.0f; } float get_HUD_battery_voltage_V(void) { if(data_old__lost_connection_to_HUD) return 0; return (float)(receiveHUD[boolHUDdata].battery_voltage_mV) / 1000.0f; } void test_HUD_sensor_values_outOfBounds(int8_t * outOfBouds1, int8_t * outOfBouds2, int8_t * outOfBouds3) { uint8_t sensorNotActiveBinary; uint8_t sensorActive[3]; // test1: user deactivation sensorNotActiveBinary = stateUsed->diveSettings.ppo2sensors_deactivated; for(int i=0;i<3;i++) sensorActive[i] = 1; if(sensorNotActiveBinary) { if(sensorNotActiveBinary & 1) sensorActive[0] = 0; if(sensorNotActiveBinary & 2) sensorActive[1] = 0; if(sensorNotActiveBinary & 4) sensorActive[2] = 0; } // test2: mV of remaining sensors for(int i=0;i<3;i++) { if(sensorActive[i]) { if( (receiveHUD[boolHUDdata].sensor_voltage_100uV[i] < 80) || (receiveHUD[boolHUDdata].sensor_voltage_100uV[i] > 2500)) { sensorActive[i] = 0; switch(i) { case 0: sensorNotActiveBinary |= 1; break; case 1: sensorNotActiveBinary |= 2; break; case 2: sensorNotActiveBinary |= 4; break; } } } } *outOfBouds1 = 0; *outOfBouds2 = 0; *outOfBouds3 = 0; /* with two, one or no sensor, there is nothing to compare anymore */ if(sensorNotActiveBinary) { // set outOfBounds for both tests if(!sensorActive[0]) *outOfBouds1 = 1; if(!sensorActive[1]) *outOfBouds2 = 1; if(!sensorActive[2]) *outOfBouds3 = 1; return; } else { uint8_t sensor_id_ordered[3]; uint8_t difference[2]; if((receiveHUD[boolHUDdata].sensor_ppo2_cbar[1]) > (receiveHUD[boolHUDdata].sensor_ppo2_cbar[0])) { sensor_id_ordered[0] = 0; sensor_id_ordered[1] = 1; } else { sensor_id_ordered[0] = 1; sensor_id_ordered[1] = 0; } if(receiveHUD[boolHUDdata].sensor_ppo2_cbar[2] > receiveHUD[boolHUDdata].sensor_ppo2_cbar[sensor_id_ordered[1]]) { sensor_id_ordered[2] = 2; } else { sensor_id_ordered[2] = sensor_id_ordered[1]; if(receiveHUD[boolHUDdata].sensor_ppo2_cbar[2] > receiveHUD[boolHUDdata].sensor_ppo2_cbar[sensor_id_ordered[0]]) { sensor_id_ordered[1] = 2; } else { sensor_id_ordered[1] = sensor_id_ordered[0]; sensor_id_ordered[0] = 2; } } difference[0] = receiveHUD[boolHUDdata].sensor_ppo2_cbar[sensor_id_ordered[1]]- receiveHUD[boolHUDdata].sensor_ppo2_cbar[sensor_id_ordered[0]]; difference[1] = receiveHUD[boolHUDdata].sensor_ppo2_cbar[sensor_id_ordered[2]]- receiveHUD[boolHUDdata].sensor_ppo2_cbar[sensor_id_ordered[1]]; if((difference[0] > difference[1]) && (difference[0] > 15)) { switch(sensor_id_ordered[0]) { case 0: *outOfBouds1 = 1; break; case 1: *outOfBouds2 = 1; break; case 2: *outOfBouds3 = 1; break; } } else if((difference[0] < difference[1]) && (difference[1] > 15)) { switch(sensor_id_ordered[2]) { case 0: *outOfBouds1 = 1; break; case 1: *outOfBouds2 = 1; break; case 2: *outOfBouds3 = 1; break; } } } } uint8_t get_ppO2SensorWeightedResult_cbar(void) { int8_t sensorOutOfBound[3]; uint16_t result = 0; uint8_t count = 0; test_HUD_sensor_values_outOfBounds(&sensorOutOfBound[0], &sensorOutOfBound[1], &sensorOutOfBound[2]); for(int i=0;i<3;i++) { if(!sensorOutOfBound[i]) { result += receiveHUD[boolHUDdata].sensor_ppo2_cbar[i]; count++; } } if(count == 0) // all sensors out of bounds! return 0; else return (uint8_t)(result / count); } void tCCR_init(void) { uint8_t loop; StartListeningToUART_HUD = 1; SDiveState* pDiveData = stateRealGetPointerWrite(); for(loop=0;loop<(2*NUM_GASES+1);loop++) { pDiveData->lifeData.bottle_bar_age_MilliSeconds[loop] = BOTTLE_SENSOR_TIMEOUT; } } /* after 3 seconds without update from HUD * data is considered old */ void tCCR_tick(void) { if(HUDTimeoutCount < 3 * 10) HUDTimeoutCount++; else { data_old__lost_connection_to_HUD = 1; if(HUDTimeoutCount < 20 * 10) HUDTimeoutCount++; else tCCR_fallbackToFixedSetpoint(); } } void tCCR_SetRXIndication(void) { static uint8_t floatingRXCount = 0; if((UartIR_HUD_Handle.RxXferSize == HUD_RX_FRAME_LENGTH) || (UartIR_HUD_Handle.RxXferSize == HUD_RX_FRAME_LENGTH - 1)) /* we expected a complete frame */ { UartReadyHUD = SET; LastReceivedTick_HUD = HAL_GetTick(); floatingRXCount = 0; } else /* follow up of error handling */ { if(time_elapsed_ms(LastReceivedTick_HUD, HAL_GetTick()) > HUD_RX_FRAME_BREAK_MS) /* Reception took a while => frame start detected */ { HAL_UART_Receive_IT(&UartIR_HUD_Handle, &receiveHUDraw[1], 14); /* We have already the first byte => get the missing 14 */ } else { if(floatingRXCount++ < HUD_BABBLING_IDIOT) { HAL_UART_Receive_IT(&UartIR_HUD_Handle, receiveHUDraw, 1); /* Start polling of incoming bytes */ } else /* Significant amount of data comming in without break => disable input */ { /* by not reactivation HUD RX, no recovery fromthis state */ stateUsedWrite->diveSettings.ppo2sensors_deactivated = 0x07; /* Display deactivation */ } } } } void tCCR_restart(void) { HAL_UART_AbortReceive_IT(&UartIR_HUD_Handle); /* Called by the error handler. RX will be restarted by control function */ StartListeningToUART_HUD = 1; } void tCCR_control(void) { uint16_t checksum = 0; #ifdef ENABLE_BOTTLE_SENSOR SDiveState *pLivedata = stateRealGetPointerWrite(); #endif if((UartReadyHUD == RESET) && StartListeningToUART_HUD && (time_elapsed_ms(LastReceivedTick_HUD, HAL_GetTick()) > HUD_RX_START_DELAY_MS)) { StartListeningToUART_HUD = 0; HAL_UART_Receive_IT(&UartIR_HUD_Handle, receiveHUDraw, HUD_RX_FRAME_LENGTH); } if(UartReadyHUD == SET) { UartReadyHUD = RESET; StartListeningToUART_HUD = 1; /* check if received package is valid */ for(int i=0;i<13;i++) { checksum += receiveHUDraw[i]; } receiveHUD[!boolHUDdata].checksum = receiveHUDraw[13] + (256 * receiveHUDraw[14]); if(checksum == receiveHUD[!boolHUDdata].checksum) { #ifdef ENABLE_BOTTLE_SENSOR if(receiveHUDraw[0] == 0xA5) /* code for pressure sensor */ { pLivedata->lifeData.bottle_bar[pLivedata->lifeData.actualGas.GasIdInSettings] = receiveHUDraw[10]; pLivedata->lifeData.bottle_bar_age_MilliSeconds[pLivedata->lifeData.actualGas.GasIdInSettings] = 0; } else #endif /* handle O2 sensor data */ { memcpy(&receiveHUD[!boolHUDdata], receiveHUDraw, 11); receiveHUD[!boolHUDdata].battery_voltage_mV = receiveHUDraw[11] + (256 * receiveHUDraw[12]); } boolHUDdata = !boolHUDdata; HUDTimeoutCount = 0; data_old__lost_connection_to_HUD = 0; } else { if(data_old__lost_connection_to_HUD) /* we lost connection, maybe due to RX shift => start single byte read to resynchronize */ { HAL_UART_Receive_IT(&UartIR_HUD_Handle, receiveHUDraw, 1); StartListeningToUART_HUD = 0; } } memset(receiveHUDraw,0,sizeof(receiveHUDraw)); } } #endif /* Private functions ---------------------------------------------------------*/ static void tCCR_fallbackToFixedSetpoint(void) { if((stateUsed->mode == MODE_DIVE) && (stateUsed->diveSettings.diveMode == DIVEMODE_CCR) && (stateUsed->diveSettings.CCR_Mode == CCRMODE_Sensors) && (stateUsed->diveSettings.fallbackOption)) { uint8_t setpointCbar, actualGasID; setpointCbar = stateUsed->diveSettings.setpoint[1].setpoint_cbar; stateUsedWrite->diveSettings.CCR_Mode = CCRMODE_FixedSetpoint; actualGasID = stateUsed->lifeData.actualGas.GasIdInSettings; setActualGas_DM(&stateUsedWrite->lifeData,actualGasID,setpointCbar); set_warning_fallback(); } }