Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 697:d55817a11f4c
Improvment key event detection:
In previous version the evaluation of a button event was called in the 100ms callback. Assuming an event is signaled at the in line for 100ms there is a potential risk to loose a button event. To avoid this scenarion the evaluation function was moved into the extint callback (called ~50+xms) and the line readback tim was reduced to 40ms.
Reminder: This function is not called in the main loop because the main loop is not executed in UART mode => movement would cause key events to not beeing detected
author | Ideenmodellierer |
---|---|
date | Sun, 25 Sep 2022 21:09:18 +0200 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit