view Documentations/dump-disc.cfg @ 213:d539ed9aa5b8 edit-fix

Bugfix, trivial: do not visit 9 on first digit for setpoint When editing a setpoint, and hitting the "-" button, the digit sequence was 1, 0, 9, 1, ... So, one could enter a setpoint of 9.5 bar (that is later automatically clamped between 0.5 and 1.6). This simply looks strange, so fix it. Now, hitting "+" and "-" behave symmetrical. At the same time, kick out some unused code. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Wed, 27 Mar 2019 15:12:26 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit