view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32_assert_template.h @ 224:ceecabfddb57 div-fixes-3

Bugfix, deco: fix 2 (small) problems with calculated ceiling This fixes 1 trivial, and 1 not really trivial bug in the calculation of the ceiling. When simulating a bounce dive to 80m, things become clear (tried this on a CCR dive, fixed setpoint 1.2bar, about 15 minutes of bottom time). Closely watch the behavior of the ceiling data. At some point during the ascent, the ceiling begins to decrease in 10cm steps. Then suddenly (while still ascending), the ceiling increases again with 1m, does not change for some time, and then suddenly steps 1.1m less deep. While not very relevant to real deco diving, it is simply wrong. The reason for this is subtle. The algorithm used to find the ceiling is a sort of linear search, stepping down a meter, overshoot the depth, and search back in 10cm steps. It seems some numerical instability. Fixing this, was a bit more computational intensive search by stepping up down in equal steps of 10cm. But, I'm pretty sure that things can be speeded up here, as a ceiling does not change fast, so it should be not that difficult to limit the search space, or use a binary search algorithm instead. The trivial second problem fixed, is that the ceiling ends at the surface and not at 1m depth. This small issue became visible after changing the step down size above. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Sun, 31 Mar 2019 19:35:51 +0200
parents c78bcbd5deda
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    stm32_assert.h
  * @author  MCD Application Team
  * @brief   STM32 assert template file.
  *          This file should be copied to the application folder and renamed
  *          to stm32_assert.h.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32_ASSERT_H
#define __STM32_ASSERT_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Includes ------------------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
#ifdef  USE_FULL_ASSERT
/**
  * @brief  The assert_param macro is used for function's parameters check.
  * @param  expr If expr is false, it calls assert_failed function
  *         which reports the name of the source file and the source
  *         line number of the call that failed.
  *         If expr is true, it returns no value.
  * @retval None
  */
  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
  void assert_failed(uint8_t* file, uint32_t line);
#else
  #define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */

#ifdef __cplusplus
}
#endif

#endif /* __STM32_ASSERT_H */


/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/