Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_DRIVER_v120/Inc/stm32f4xx_ll_usb.h @ 110:cc8e24374b83 FlipDisplay
Added option to handled mirrored display to existing functions
author | Ideenmodellierer |
---|---|
date | Tue, 01 Jan 2019 21:02:17 +0100 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_usb.h * @author MCD Application Team * @version V1.2.0 * @date 26-December-2014 * @brief Header file of USB Core HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_LL_USB_H #define __STM32F4xx_LL_USB_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL * @{ */ /** @addtogroup USB_Core * @{ */ /* Exported types ------------------------------------------------------------*/ /** * @brief USB Mode definition */ typedef enum { USB_OTG_DEVICE_MODE = 0, USB_OTG_HOST_MODE = 1, USB_OTG_DRD_MODE = 2 }USB_OTG_ModeTypeDef; /** * @brief URB States definition */ typedef enum { URB_IDLE = 0, URB_DONE, URB_NOTREADY, URB_NYET, URB_ERROR, URB_STALL }USB_OTG_URBStateTypeDef; /** * @brief Host channel States definition */ typedef enum { HC_IDLE = 0, HC_XFRC, HC_HALTED, HC_NAK, HC_NYET, HC_STALL, HC_XACTERR, HC_BBLERR, HC_DATATGLERR }USB_OTG_HCStateTypeDef; /** * @brief PCD Initialization Structure definition */ typedef struct { uint32_t dev_endpoints; /*!< Device Endpoints number. This parameter depends on the used USB core. This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ uint32_t Host_channels; /*!< Host Channels number. This parameter Depends on the used USB core. This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ uint32_t speed; /*!< USB Core speed. This parameter can be any value of @ref USB_Core_Speed_ */ uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. This parameter can be any value of @ref USB_EP0_MPS_ */ uint32_t phy_itface; /*!< Select the used PHY interface. This parameter can be any value of @ref USB_Core_PHY_ */ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ }USB_OTG_CfgTypeDef; typedef struct { uint8_t num; /*!< Endpoint number This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ uint8_t is_in; /*!< Endpoint direction This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ uint8_t is_stall; /*!< Endpoint stall condition This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ uint8_t type; /*!< Endpoint type This parameter can be any value of @ref USB_EP_Type_ */ uint8_t data_pid_start; /*!< Initial data PID This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ uint8_t even_odd_frame; /*!< IFrame parity This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ uint16_t tx_fifo_num; /*!< Transmission FIFO number This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ uint32_t maxpacket; /*!< Endpoint Max packet size This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ uint32_t xfer_len; /*!< Current transfer length */ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ }USB_OTG_EPTypeDef; typedef struct { uint8_t dev_addr ; /*!< USB device address. This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ uint8_t ch_num; /*!< Host channel number. This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ uint8_t ep_num; /*!< Endpoint number. This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ uint8_t ep_is_in; /*!< Endpoint direction This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ uint8_t speed; /*!< USB Host speed. This parameter can be any value of @ref USB_Core_Speed_ */ uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ uint8_t ep_type; /*!< Endpoint Type. This parameter can be any value of @ref USB_EP_Type_ */ uint16_t max_packet; /*!< Endpoint Max packet size. This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ uint8_t data_pid; /*!< Initial data PID. This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ uint32_t xfer_len; /*!< Current transfer length. */ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ uint8_t toggle_in; /*!< IN transfer current toggle flag. This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ uint8_t toggle_out; /*!< OUT transfer current toggle flag This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ uint32_t ErrCnt; /*!< Host channel error count.*/ USB_OTG_URBStateTypeDef urb_state; /*!< URB state. This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ USB_OTG_HCStateTypeDef state; /*!< Host Channel state. This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ }USB_OTG_HCTypeDef; /* Exported constants --------------------------------------------------------*/ /** @defgroup PCD_Exported_Constants PCD Exported Constants * @{ */ /** @defgroup USB_Core_Mode_ USB Core Mode * @{ */ #define USB_OTG_MODE_DEVICE 0 #define USB_OTG_MODE_HOST 1 #define USB_OTG_MODE_DRD 2 /** * @} */ /** @defgroup USB_Core_Speed_ USB Core Speed * @{ */ #define USB_OTG_SPEED_HIGH 0 #define USB_OTG_SPEED_HIGH_IN_FULL 1 #define USB_OTG_SPEED_LOW 2 #define USB_OTG_SPEED_FULL 3 /** * @} */ /** @defgroup USB_Core_PHY_ USB Core PHY * @{ */ #define USB_OTG_ULPI_PHY 1 #define USB_OTG_EMBEDDED_PHY 2 /** * @} */ /** @defgroup USB_Core_MPS_ USB Core MPS * @{ */ #define USB_OTG_HS_MAX_PACKET_SIZE 512 #define USB_OTG_FS_MAX_PACKET_SIZE 64 #define USB_OTG_MAX_EP0_SIZE 64 /** * @} */ /** @defgroup USB_Core_Phy_Frequency_ USB Core Phy Frequency * @{ */ #define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0 << 1) #define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1) #define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1) #define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1) /** * @} */ /** @defgroup USB_CORE_Frame_Interval_ USB CORE Frame Interval * @{ */ #define DCFG_FRAME_INTERVAL_80 0 #define DCFG_FRAME_INTERVAL_85 1 #define DCFG_FRAME_INTERVAL_90 2 #define DCFG_FRAME_INTERVAL_95 3 /** * @} */ /** @defgroup USB_EP0_MPS_ USB EP0 MPS * @{ */ #define DEP0CTL_MPS_64 0 #define DEP0CTL_MPS_32 1 #define DEP0CTL_MPS_16 2 #define DEP0CTL_MPS_8 3 /** * @} */ /** @defgroup USB_EP_Speed_ USB EP Speed * @{ */ #define EP_SPEED_LOW 0 #define EP_SPEED_FULL 1 #define EP_SPEED_HIGH 2 /** * @} */ /** @defgroup USB_EP_Type_ USB EP Type * @{ */ #define EP_TYPE_CTRL 0 #define EP_TYPE_ISOC 1 #define EP_TYPE_BULK 2 #define EP_TYPE_INTR 3 #define EP_TYPE_MSK 3 /** * @} */ /** @defgroup USB_STS_Defines_ USB STS Defines * @{ */ #define STS_GOUT_NAK 1 #define STS_DATA_UPDT 2 #define STS_XFER_COMP 3 #define STS_SETUP_COMP 4 #define STS_SETUP_UPDT 6 /** * @} */ /** @defgroup HCFG_SPEED_Defines_ HCFG SPEED Defines * @{ */ #define HCFG_30_60_MHZ 0 #define HCFG_48_MHZ 1 #define HCFG_6_MHZ 2 /** * @} */ /** @defgroup HPRT0_PRTSPD_SPEED_Defines_ HPRT0 PRTSPD SPEED Defines * @{ */ #define HPRT0_PRTSPD_HIGH_SPEED 0 #define HPRT0_PRTSPD_FULL_SPEED 1 #define HPRT0_PRTSPD_LOW_SPEED 2 /** * @} */ #define HCCHAR_CTRL 0 #define HCCHAR_ISOC 1 #define HCCHAR_BULK 2 #define HCCHAR_INTR 3 #define HC_PID_DATA0 0 #define HC_PID_DATA2 1 #define HC_PID_DATA1 2 #define HC_PID_SETUP 3 #define GRXSTS_PKTSTS_IN 2 #define GRXSTS_PKTSTS_IN_XFER_COMP 3 #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5 #define GRXSTS_PKTSTS_CH_HALTED 7 #define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE) #define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE) #define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE)) #define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) #define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) #define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE) #define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE)) #define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE)) /** * @} */ /* Exported macro ------------------------------------------------------------*/ #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) /* Exported functions --------------------------------------------------------*/ HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode); HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed); HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num ); HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma); HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma); HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma); void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address); HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup); uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx); uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx); uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx); uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq); HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state); uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx); uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, uint8_t epnum, uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps); HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma); uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num); HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num); HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_LL_USB_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/