view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_dma2d.h @ 949:c6b858f2e025 Evo_2_23 tip

GNSS UTC in Date-Time menu: The UTC time provided by the gnss module is not shown in the date-time settings menu. If a valid time signal is available then the OSTC RTC may be set to it by selecting the UTC menu entry. The time zone has to be selected manually. This is possible using a separate edit line.
author Ideenmodellierer
date Sun, 22 Dec 2024 21:19:21 +0100
parents c78bcbd5deda
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    stm32f4xx_ll_dma2d.h
  * @author  MCD Application Team
  * @brief   Header file of DMA2D LL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_LL_DMA2D_H
#define __STM32F4xx_LL_DMA2D_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"

/** @addtogroup STM32F4xx_LL_Driver
  * @{
  */

#if defined (DMA2D)

/** @defgroup DMA2D_LL DMA2D
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup DMA2D_LL_Private_Macros DMA2D Private Macros
  * @{
  */

/**
  * @}
  */
#endif /*USE_FULL_LL_DRIVER*/

/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup DMA2D_LL_ES_Init_Struct DMA2D Exported Init structures
  * @{
  */

/**
  * @brief LL DMA2D Init Structure Definition
  */
typedef struct
{
  uint32_t Mode;                 /*!< Specifies the DMA2D transfer mode.
                                      - This parameter can be one value of @ref DMA2D_LL_EC_MODE.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetMode().*/

  uint32_t ColorMode;            /*!< Specifies the color format of the output image.
                                      - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColorMode(). */

  uint32_t OutputBlue;           /*!< Specifies the Blue value of the output image.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration
                                      function @ref LL_DMA2D_ConfigOutputColor(). */

  uint32_t OutputGreen;          /*!< Specifies the Green value of the output image.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration
                                      function @ref LL_DMA2D_ConfigOutputColor(). */

  uint32_t OutputRed;            /*!< Specifies the Red value of the output image.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration
                                      function @ref LL_DMA2D_ConfigOutputColor(). */

  uint32_t OutputAlpha;          /*!< Specifies the Alpha channel of the output image.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.
                                      - This parameter is not considered if RGB888 or RGB565 color mode is selected.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration
                                      function @ref LL_DMA2D_ConfigOutputColor(). */

  uint32_t OutputMemoryAddress;  /*!< Specifies the memory address.
                                      - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputMemAddr(). */

  uint32_t  LineOffset;          /*!< Specifies the output line offset value.
                                      - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetLineOffset(). */

  uint32_t NbrOfLines;           /*!< Specifies the number of lines of the area to be transferred.
                                      - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetNbrOfLines(). */

  uint32_t NbrOfPixelsPerLines;  /*!< Specifies the number of pixels per lines of the area to be transfered.
                                      - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetNbrOfPixelsPerLines(). */

} LL_DMA2D_InitTypeDef;

/**
  * @brief LL DMA2D Layer Configuration Structure Definition
  */
typedef struct
{
  uint32_t MemoryAddress;        /*!< Specifies the foreground or background memory address.
                                      - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetMemAddr() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetMemAddr() for background layer. */

  uint32_t  LineOffset;          /*!< Specifies the foreground or background line offset value.
                                      - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetLineOffset() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetLineOffset() for background layer. */

  uint32_t ColorMode;            /*!< Specifies the foreground or background color mode.
                                      - This parameter can be one value of @ref DMA2D_LL_EC_INPUT_COLOR_MODE.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetColorMode() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetColorMode() for background layer. */

  uint32_t CLUTColorMode;        /*!< Specifies the foreground or background CLUT color mode.
                                       - This parameter can be one value of @ref DMA2D_LL_EC_CLUT_COLOR_MODE.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetCLUTColorMode() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetCLUTColorMode() for background layer. */

  uint32_t CLUTSize;             /*!< Specifies the foreground or background CLUT size.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetCLUTSize() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetCLUTSize() for background layer. */

  uint32_t AlphaMode;            /*!< Specifies the foreground or background alpha mode.
                                       - This parameter can be one value of @ref DMA2D_LL_EC_ALPHA_MODE.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetAlphaMode() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetAlphaMode() for background layer. */

  uint32_t Alpha;                /*!< Specifies the foreground or background Alpha value.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetAlpha() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetAlpha() for background layer. */

  uint32_t Blue;                 /*!< Specifies the foreground or background Blue color value.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetBlueColor() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetBlueColor() for background layer. */

  uint32_t Green;                /*!< Specifies the foreground or background Green color value.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetGreenColor() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetGreenColor() for background layer. */

  uint32_t Red;                  /*!< Specifies the foreground or background Red color value.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetRedColor() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetRedColor() for background layer. */

  uint32_t CLUTMemoryAddress;    /*!< Specifies the foreground or background CLUT memory address.
                                      - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF.

                                      This parameter can be modified afterwards using unitary functions
                                      - @ref LL_DMA2D_FGND_SetCLUTMemAddr() for foreground layer,
                                      - @ref LL_DMA2D_BGND_SetCLUTMemAddr() for background layer. */

} LL_DMA2D_LayerCfgTypeDef;

/**
  * @brief LL DMA2D Output Color Structure Definition
  */
typedef struct
{
  uint32_t ColorMode;            /*!< Specifies the color format of the output image.
                                      - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColorMode(). */

  uint32_t OutputBlue;           /*!< Specifies the Blue value of the output image.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration
                                      function @ref LL_DMA2D_ConfigOutputColor(). */

  uint32_t OutputGreen;          /*!< Specifies the Green value of the output image.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration
                                      function @ref LL_DMA2D_ConfigOutputColor(). */

  uint32_t OutputRed;            /*!< Specifies the Red value of the output image.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration
                                      function @ref LL_DMA2D_ConfigOutputColor(). */

  uint32_t OutputAlpha;          /*!< Specifies the Alpha channel of the output image.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected.
                                      - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.
                                      - This parameter is not considered if RGB888 or RGB565 color mode is selected.

                                      This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration
                                      function @ref LL_DMA2D_ConfigOutputColor(). */

} LL_DMA2D_ColorTypeDef;

/**
  * @}
  */
#endif /* USE_FULL_LL_DRIVER */

/* Exported constants --------------------------------------------------------*/
/** @defgroup DMA2D_LL_Exported_Constants DMA2D Exported Constants
  * @{
  */

/** @defgroup DMA2D_LL_EC_GET_FLAG Get Flags Defines
  * @brief    Flags defines which can be used with LL_DMA2D_ReadReg function
  * @{
  */
#define LL_DMA2D_FLAG_CEIF          DMA2D_ISR_CEIF     /*!< Configuration Error Interrupt Flag */
#define LL_DMA2D_FLAG_CTCIF         DMA2D_ISR_CTCIF    /*!< CLUT Transfer Complete Interrupt Flag */
#define LL_DMA2D_FLAG_CAEIF         DMA2D_ISR_CAEIF    /*!< CLUT Access Error Interrupt Flag */
#define LL_DMA2D_FLAG_TWIF          DMA2D_ISR_TWIF     /*!< Transfer Watermark Interrupt Flag */
#define LL_DMA2D_FLAG_TCIF          DMA2D_ISR_TCIF     /*!< Transfer Complete Interrupt Flag */
#define LL_DMA2D_FLAG_TEIF          DMA2D_ISR_TEIF     /*!< Transfer Error Interrupt Flag */
/**
  * @}
  */

/** @defgroup DMA2D_LL_EC_IT IT Defines
  * @brief    IT defines which can be used with LL_DMA2D_ReadReg and  LL_DMA2D_WriteReg functions
  * @{
  */
#define LL_DMA2D_IT_CEIE             DMA2D_CR_CEIE    /*!< Configuration Error Interrupt */
#define LL_DMA2D_IT_CTCIE            DMA2D_CR_CTCIE   /*!< CLUT Transfer Complete Interrupt */
#define LL_DMA2D_IT_CAEIE            DMA2D_CR_CAEIE   /*!< CLUT Access Error Interrupt */
#define LL_DMA2D_IT_TWIE             DMA2D_CR_TWIE    /*!< Transfer Watermark Interrupt */
#define LL_DMA2D_IT_TCIE             DMA2D_CR_TCIE    /*!< Transfer Complete Interrupt */
#define LL_DMA2D_IT_TEIE             DMA2D_CR_TEIE    /*!< Transfer Error Interrupt */
/**
  * @}
  */

/** @defgroup DMA2D_LL_EC_MODE Mode
  * @{
  */
#define LL_DMA2D_MODE_M2M            0x00000000U                     /*!< DMA2D memory to memory transfer mode */
#define LL_DMA2D_MODE_M2M_PFC        DMA2D_CR_MODE_0                 /*!< DMA2D memory to memory with pixel format conversion transfer mode */
#define LL_DMA2D_MODE_M2M_BLEND      DMA2D_CR_MODE_1                 /*!< DMA2D memory to memory with blending transfer mode */
#define LL_DMA2D_MODE_R2M            DMA2D_CR_MODE                   /*!< DMA2D register to memory transfer mode */
/**
  * @}
  */

/** @defgroup DMA2D_LL_EC_OUTPUT_COLOR_MODE Output Color Mode
  * @{
  */
#define LL_DMA2D_OUTPUT_MODE_ARGB8888     0x00000000U                           /*!< ARGB8888 */
#define LL_DMA2D_OUTPUT_MODE_RGB888       DMA2D_OPFCCR_CM_0                     /*!< RGB888   */
#define LL_DMA2D_OUTPUT_MODE_RGB565       DMA2D_OPFCCR_CM_1                     /*!< RGB565   */
#define LL_DMA2D_OUTPUT_MODE_ARGB1555     (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 */
#define LL_DMA2D_OUTPUT_MODE_ARGB4444     DMA2D_OPFCCR_CM_2                     /*!< ARGB4444 */
/**
  * @}
  */

/** @defgroup DMA2D_LL_EC_INPUT_COLOR_MODE Input Color Mode
  * @{
  */
#define LL_DMA2D_INPUT_MODE_ARGB8888      0x00000000U                                                /*!< ARGB8888 */
#define LL_DMA2D_INPUT_MODE_RGB888        DMA2D_FGPFCCR_CM_0                                         /*!< RGB888   */
#define LL_DMA2D_INPUT_MODE_RGB565        DMA2D_FGPFCCR_CM_1                                         /*!< RGB565   */
#define LL_DMA2D_INPUT_MODE_ARGB1555      (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1)                    /*!< ARGB1555 */
#define LL_DMA2D_INPUT_MODE_ARGB4444      DMA2D_FGPFCCR_CM_2                                         /*!< ARGB4444 */
#define LL_DMA2D_INPUT_MODE_L8            (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_2)                    /*!< L8       */
#define LL_DMA2D_INPUT_MODE_AL44          (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2)                    /*!< AL44     */
#define LL_DMA2D_INPUT_MODE_AL88          (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL88     */
#define LL_DMA2D_INPUT_MODE_L4            DMA2D_FGPFCCR_CM_3                                         /*!< L4       */
#define LL_DMA2D_INPUT_MODE_A8            (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_3)                    /*!< A8       */
#define LL_DMA2D_INPUT_MODE_A4            (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_3)                    /*!< A4       */
/**
  * @}
  */

/** @defgroup DMA2D_LL_EC_ALPHA_MODE Alpha Mode
  * @{
  */
#define LL_DMA2D_ALPHA_MODE_NO_MODIF       0x00000000U             /*!< No modification of the alpha channel value */
#define LL_DMA2D_ALPHA_MODE_REPLACE        DMA2D_FGPFCCR_AM_0      /*!< Replace original alpha channel value by programmed alpha value */
#define LL_DMA2D_ALPHA_MODE_COMBINE        DMA2D_FGPFCCR_AM_1      /*!< Replace original alpha channel value by programmed alpha value
                                                                   with original alpha channel value                              */
/**
  * @}
  */

/** @defgroup DMA2D_LL_EC_CLUT_COLOR_MODE CLUT Color Mode
  * @{
  */
#define LL_DMA2D_CLUT_COLOR_MODE_ARGB8888          0x00000000U                     /*!< ARGB8888 */
#define LL_DMA2D_CLUT_COLOR_MODE_RGB888            DMA2D_FGPFCCR_CCM               /*!< RGB888   */
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/
/** @defgroup DMA2D_LL_Exported_Macros DMA2D Exported Macros
  * @{
  */

/** @defgroup DMA2D_LL_EM_WRITE_READ Common Write and read registers Macros
  * @{
  */

/**
  * @brief  Write a value in DMA2D register.
  * @param  __INSTANCE__ DMA2D Instance
  * @param  __REG__ Register to be written
  * @param  __VALUE__ Value to be written in the register
  * @retval None
  */
#define LL_DMA2D_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))

/**
  * @brief  Read a value in DMA2D register.
  * @param  __INSTANCE__ DMA2D Instance
  * @param  __REG__ Register to be read
  * @retval Register value
  */
#define LL_DMA2D_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
/**
  * @}
  */

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @defgroup DMA2D_LL_Exported_Functions DMA2D Exported Functions
  * @{
  */

/** @defgroup DMA2D_LL_EF_Configuration Configuration Functions
  * @{
  */

/**
  * @brief  Start a DMA2D transfer.
  * @rmtoll CR          START            LL_DMA2D_Start
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_Start(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->CR, DMA2D_CR_START);
}

/**
  * @brief  Indicate if a DMA2D transfer is ongoing.
  * @rmtoll CR          START            LL_DMA2D_IsTransferOngoing
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsTransferOngoing(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->CR, DMA2D_CR_START) == (DMA2D_CR_START));
}

/**
  * @brief  Suspend DMA2D transfer.
  * @note   This API can be used to suspend automatic foreground or background CLUT loading.
  * @rmtoll CR          SUSP            LL_DMA2D_Suspend
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_Suspend(DMA2D_TypeDef *DMA2Dx)
{
  MODIFY_REG(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START, DMA2D_CR_SUSP);
}

/**
  * @brief  Resume DMA2D transfer.
  * @note   This API can be used to resume automatic foreground or background CLUT loading.
  * @rmtoll CR          SUSP            LL_DMA2D_Resume
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_Resume(DMA2D_TypeDef *DMA2Dx)
{
  CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START);
}

/**
  * @brief  Indicate if DMA2D transfer is suspended.
  * @note   This API can be used to indicate whether or not automatic foreground or
  *         background CLUT loading is suspended.
  * @rmtoll CR          SUSP            LL_DMA2D_IsSuspended
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsSuspended(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->CR, DMA2D_CR_SUSP) == (DMA2D_CR_SUSP));
}

/**
  * @brief  Abort DMA2D transfer.
  * @note   This API can be used to abort automatic foreground or background CLUT loading.
  * @rmtoll CR          ABORT            LL_DMA2D_Abort
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_Abort(DMA2D_TypeDef *DMA2Dx)
{
  MODIFY_REG(DMA2Dx->CR, DMA2D_CR_ABORT | DMA2D_CR_START, DMA2D_CR_ABORT);
}

/**
  * @brief  Indicate if DMA2D transfer is aborted.
  * @note   This API can be used to indicate whether or not automatic foreground or
  *         background CLUT loading is aborted.
  * @rmtoll CR          ABORT            LL_DMA2D_IsAborted
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsAborted(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->CR, DMA2D_CR_ABORT) == (DMA2D_CR_ABORT));
}

/**
  * @brief  Set DMA2D mode.
  * @rmtoll CR          MODE          LL_DMA2D_SetMode
  * @param  DMA2Dx DMA2D Instance
  * @param  Mode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_MODE_M2M
  *         @arg @ref LL_DMA2D_MODE_M2M_PFC
  *         @arg @ref LL_DMA2D_MODE_M2M_BLEND
  *         @arg @ref LL_DMA2D_MODE_R2M
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_SetMode(DMA2D_TypeDef *DMA2Dx, uint32_t Mode)
{
  MODIFY_REG(DMA2Dx->CR, DMA2D_CR_MODE, Mode);
}

/**
  * @brief  Return DMA2D mode
  * @rmtoll CR          MODE         LL_DMA2D_GetMode
  * @param  DMA2Dx DMA2D Instance
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DMA2D_MODE_M2M
  *         @arg @ref LL_DMA2D_MODE_M2M_PFC
  *         @arg @ref LL_DMA2D_MODE_M2M_BLEND
  *         @arg @ref LL_DMA2D_MODE_R2M
  */
__STATIC_INLINE uint32_t LL_DMA2D_GetMode(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->CR, DMA2D_CR_MODE));
}

/**
  * @brief  Set DMA2D output color mode.
  * @rmtoll OPFCCR          CM          LL_DMA2D_SetOutputColorMode
  * @param  DMA2Dx DMA2D Instance
  * @param  ColorMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_SetOutputColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)
{
  MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM, ColorMode);
}

/**
  * @brief  Return DMA2D output color mode.
  * @rmtoll OPFCCR          CM         LL_DMA2D_GetOutputColorMode
  * @param  DMA2Dx DMA2D Instance
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444
  */
__STATIC_INLINE uint32_t LL_DMA2D_GetOutputColorMode(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM));
}

/**
  * @brief  Set DMA2D line offset, expressed on 14 bits ([13:0] bits).
  * @rmtoll OOR          LO          LL_DMA2D_SetLineOffset
  * @param  DMA2Dx DMA2D Instance
  * @param  LineOffset Value between Min_Data=0 and Max_Data=0x3FFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset)
{
  MODIFY_REG(DMA2Dx->OOR, DMA2D_OOR_LO, LineOffset);
}

/**
  * @brief  Return DMA2D line offset, expressed on 14 bits ([13:0] bits).
  * @rmtoll OOR          LO         LL_DMA2D_GetLineOffset
  * @param  DMA2Dx DMA2D Instance
  * @retval Line offset value between Min_Data=0 and Max_Data=0x3FFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_GetLineOffset(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->OOR, DMA2D_OOR_LO));
}

/**
  * @brief  Set DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits).
  * @rmtoll NLR          PL          LL_DMA2D_SetNbrOfPixelsPerLines
  * @param  DMA2Dx DMA2D Instance
  * @param  NbrOfPixelsPerLines Value between Min_Data=0 and Max_Data=0x3FFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_SetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfPixelsPerLines)
{
  MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_PL, (NbrOfPixelsPerLines << DMA2D_NLR_PL_Pos));
}

/**
  * @brief  Return DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits)
  * @rmtoll NLR          PL          LL_DMA2D_GetNbrOfPixelsPerLines
  * @param  DMA2Dx DMA2D Instance
  * @retval Number of pixels per lines value between Min_Data=0 and Max_Data=0x3FFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_PL) >> DMA2D_NLR_PL_Pos);
}

/**
  * @brief  Set DMA2D number of lines, expressed on 16 bits ([15:0] bits).
  * @rmtoll NLR          NL          LL_DMA2D_SetNbrOfLines
  * @param  DMA2Dx DMA2D Instance
  * @param  NbrOfLines Value between Min_Data=0 and Max_Data=0xFFFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_SetNbrOfLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines)
{
  MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_NL, NbrOfLines);
}

/**
  * @brief  Return DMA2D number of lines, expressed on 16 bits ([15:0] bits).
  * @rmtoll NLR          NL          LL_DMA2D_GetNbrOfLines
  * @param  DMA2Dx DMA2D Instance
  * @retval Number of lines value between Min_Data=0 and Max_Data=0xFFFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfLines(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_NL));
}

/**
  * @brief  Set DMA2D output memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll OMAR          MA          LL_DMA2D_SetOutputMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @param  OutputMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_SetOutputMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t OutputMemoryAddress)
{
  LL_DMA2D_WriteReg(DMA2Dx, OMAR, OutputMemoryAddress);
}

/**
  * @brief  Get DMA2D output memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll OMAR          MA          LL_DMA2D_GetOutputMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @retval Output memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_GetOutputMemAddr(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, OMAR));
}

/**
  * @brief  Set DMA2D output color, expressed on 32 bits ([31:0] bits).
  * @note   Output color format depends on output color mode, ARGB8888, RGB888,
  *         RGB565, ARGB1555 or ARGB4444.
  * @note LL_DMA2D_ConfigOutputColor() API may be used instead if colors values formatting
  *       with respect to color mode is not done by the user code.
  * @rmtoll OCOLR        BLUE        LL_DMA2D_SetOutputColor\n
  *         OCOLR        GREEN       LL_DMA2D_SetOutputColor\n
  *         OCOLR        RED         LL_DMA2D_SetOutputColor\n
  *         OCOLR        ALPHA       LL_DMA2D_SetOutputColor
  * @param  DMA2Dx DMA2D Instance
  * @param  OutputColor Value between Min_Data=0 and Max_Data=0xFFFFFFFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_SetOutputColor(DMA2D_TypeDef *DMA2Dx, uint32_t OutputColor)
{
  MODIFY_REG(DMA2Dx->OCOLR, (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1), \
             OutputColor);
}

/**
  * @brief  Get DMA2D output color, expressed on 32 bits ([31:0] bits).
  * @note   Alpha channel and red, green, blue color values must be retrieved from the returned
  *         value based on the output color mode (ARGB8888, RGB888,  RGB565, ARGB1555 or ARGB4444)
  *         as set by @ref LL_DMA2D_SetOutputColorMode.
  * @rmtoll OCOLR        BLUE        LL_DMA2D_GetOutputColor\n
  *         OCOLR        GREEN       LL_DMA2D_GetOutputColor\n
  *         OCOLR        RED         LL_DMA2D_GetOutputColor\n
  *         OCOLR        ALPHA       LL_DMA2D_GetOutputColor
  * @param  DMA2Dx DMA2D Instance
  * @retval Output color value between Min_Data=0 and Max_Data=0xFFFFFFFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_GetOutputColor(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->OCOLR, \
                             (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1)));
}

/**
  * @brief  Set DMA2D line watermark, expressed on 16 bits ([15:0] bits).
  * @rmtoll LWR          LW          LL_DMA2D_SetLineWatermark
  * @param  DMA2Dx DMA2D Instance
  * @param  LineWatermark Value between Min_Data=0 and Max_Data=0xFFFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_SetLineWatermark(DMA2D_TypeDef *DMA2Dx, uint32_t LineWatermark)
{
  MODIFY_REG(DMA2Dx->LWR, DMA2D_LWR_LW, LineWatermark);
}

/**
  * @brief  Return DMA2D line watermark, expressed on 16 bits ([15:0] bits).
  * @rmtoll LWR          LW          LL_DMA2D_GetLineWatermark
  * @param  DMA2Dx DMA2D Instance
  * @retval Line watermark value between Min_Data=0 and Max_Data=0xFFFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_GetLineWatermark(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->LWR, DMA2D_LWR_LW));
}

/**
  * @brief  Set DMA2D dead time, expressed on 8 bits ([7:0] bits).
  * @rmtoll AMTCR          DT          LL_DMA2D_SetDeadTime
  * @param  DMA2Dx DMA2D Instance
  * @param  DeadTime Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_SetDeadTime(DMA2D_TypeDef *DMA2Dx, uint32_t DeadTime)
{
  MODIFY_REG(DMA2Dx->AMTCR, DMA2D_AMTCR_DT, (DeadTime << DMA2D_AMTCR_DT_Pos));
}

/**
  * @brief  Return DMA2D dead time, expressed on 8 bits ([7:0] bits).
  * @rmtoll AMTCR          DT          LL_DMA2D_GetDeadTime
  * @param  DMA2Dx DMA2D Instance
  * @retval Dead time value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_GetDeadTime(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_DT) >> DMA2D_AMTCR_DT_Pos);
}

/**
  * @brief  Enable DMA2D dead time functionality.
  * @rmtoll AMTCR          EN            LL_DMA2D_EnableDeadTime
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_EnableDeadTime(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN);
}

/**
  * @brief  Disable DMA2D dead time functionality.
  * @rmtoll AMTCR          EN            LL_DMA2D_DisableDeadTime
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_DisableDeadTime(DMA2D_TypeDef *DMA2Dx)
{
  CLEAR_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN);
}

/**
  * @brief  Indicate if DMA2D dead time functionality is enabled.
  * @rmtoll AMTCR          EN            LL_DMA2D_IsEnabledDeadTime
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledDeadTime(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN) == (DMA2D_AMTCR_EN));
}

/** @defgroup DMA2D_LL_EF_FGND_Configuration Foreground Configuration Functions
  * @{
  */

/**
  * @brief  Set DMA2D foreground memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll FGMAR          MA          LL_DMA2D_FGND_SetMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @param  MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress)
{
  LL_DMA2D_WriteReg(DMA2Dx, FGMAR, MemoryAddress);
}

/**
  * @brief  Get DMA2D foreground memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll FGMAR          MA          LL_DMA2D_FGND_GetMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @retval Foreground memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGMAR));
}

/**
  * @brief  Enable DMA2D foreground CLUT loading.
  * @rmtoll FGPFCCR          START            LL_DMA2D_FGND_EnableCLUTLoad
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START);
}

/**
  * @brief  Indicate if DMA2D foreground CLUT loading is enabled.
  * @rmtoll FGPFCCR          START            LL_DMA2D_FGND_IsEnabledCLUTLoad
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START) == (DMA2D_FGPFCCR_START));
}

/**
  * @brief  Set DMA2D foreground color mode.
  * @rmtoll FGPFCCR          CM          LL_DMA2D_FGND_SetColorMode
  * @param  DMA2Dx DMA2D Instance
  * @param  ColorMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_INPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_INPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444
  *         @arg @ref LL_DMA2D_INPUT_MODE_L8
  *         @arg @ref LL_DMA2D_INPUT_MODE_AL44
  *         @arg @ref LL_DMA2D_INPUT_MODE_AL88
  *         @arg @ref LL_DMA2D_INPUT_MODE_L4
  *         @arg @ref LL_DMA2D_INPUT_MODE_A8
  *         @arg @ref LL_DMA2D_INPUT_MODE_A4
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)
{
  MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM, ColorMode);
}

/**
  * @brief  Return DMA2D foreground color mode.
  * @rmtoll FGPFCCR          CM         LL_DMA2D_FGND_GetColorMode
  * @param  DMA2Dx DMA2D Instance
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_INPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_INPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444
  *         @arg @ref LL_DMA2D_INPUT_MODE_L8
  *         @arg @ref LL_DMA2D_INPUT_MODE_AL44
  *         @arg @ref LL_DMA2D_INPUT_MODE_AL88
  *         @arg @ref LL_DMA2D_INPUT_MODE_L4
  *         @arg @ref LL_DMA2D_INPUT_MODE_A8
  *         @arg @ref LL_DMA2D_INPUT_MODE_A4
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetColorMode(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM));
}

/**
  * @brief  Set DMA2D foreground alpha mode.
  * @rmtoll FGPFCCR          AM          LL_DMA2D_FGND_SetAlphaMode
  * @param  DMA2Dx DMA2D Instance
  * @param  AphaMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF
  *         @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE
  *         @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode)
{
  MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM, AphaMode);
}

/**
  * @brief  Return DMA2D foreground alpha mode.
  * @rmtoll FGPFCCR          AM         LL_DMA2D_FGND_GetAlphaMode
  * @param  DMA2Dx DMA2D Instance
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF
  *         @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE
  *         @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM));
}

/**
  * @brief  Set DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGPFCCR          ALPHA          LL_DMA2D_FGND_SetAlpha
  * @param  DMA2Dx DMA2D Instance
  * @param  Alpha Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha)
{
  MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA, (Alpha << DMA2D_FGPFCCR_ALPHA_Pos));
}

/**
  * @brief  Return DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGPFCCR          ALPHA         LL_DMA2D_FGND_GetAlpha
  * @param  DMA2Dx DMA2D Instance
  * @retval Alpha value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlpha(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA) >> DMA2D_FGPFCCR_ALPHA_Pos);
}

/**
  * @brief  Set DMA2D foreground line offset, expressed on 14 bits ([13:0] bits).
  * @rmtoll FGOR          LO          LL_DMA2D_FGND_SetLineOffset
  * @param  DMA2Dx DMA2D Instance
  * @param  LineOffset Value between Min_Data=0 and Max_Data=0x3FF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset)
{
  MODIFY_REG(DMA2Dx->FGOR, DMA2D_FGOR_LO, LineOffset);
}

/**
  * @brief  Return DMA2D foreground line offset, expressed on 14 bits ([13:0] bits).
  * @rmtoll FGOR          LO         LL_DMA2D_FGND_GetLineOffset
  * @param  DMA2Dx DMA2D Instance
  * @retval Foreground line offset value between Min_Data=0 and Max_Data=0x3FF
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->FGOR, DMA2D_FGOR_LO));
}

/**
  * @brief  Set DMA2D foreground color values, expressed on 24 bits ([23:0] bits).
  * @rmtoll FGCOLR          RED          LL_DMA2D_FGND_SetColor
  * @rmtoll FGCOLR          GREEN        LL_DMA2D_FGND_SetColor
  * @rmtoll FGCOLR          BLUE         LL_DMA2D_FGND_SetColor
  * @param  DMA2Dx DMA2D Instance
  * @param  Red   Value between Min_Data=0 and Max_Data=0xFF
  * @param  Green Value between Min_Data=0 and Max_Data=0xFF
  * @param  Blue  Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue)
{
  MODIFY_REG(DMA2Dx->FGCOLR, (DMA2D_FGCOLR_RED | DMA2D_FGCOLR_GREEN | DMA2D_FGCOLR_BLUE), \
             ((Red << DMA2D_FGCOLR_RED_Pos) | (Green << DMA2D_FGCOLR_GREEN_Pos) | Blue));
}

/**
  * @brief  Set DMA2D foreground red color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGCOLR          RED          LL_DMA2D_FGND_SetRedColor
  * @param  DMA2Dx DMA2D Instance
  * @param  Red Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red)
{
  MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED, (Red << DMA2D_FGCOLR_RED_Pos));
}

/**
  * @brief  Return DMA2D foreground red color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGCOLR          RED         LL_DMA2D_FGND_GetRedColor
  * @param  DMA2Dx DMA2D Instance
  * @retval Red color value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetRedColor(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED) >> DMA2D_FGCOLR_RED_Pos);
}

/**
  * @brief  Set DMA2D foreground green color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGCOLR          GREEN          LL_DMA2D_FGND_SetGreenColor
  * @param  DMA2Dx DMA2D Instance
  * @param  Green Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green)
{
  MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN, (Green << DMA2D_FGCOLR_GREEN_Pos));
}

/**
  * @brief  Return DMA2D foreground green color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGCOLR          GREEN         LL_DMA2D_FGND_GetGreenColor
  * @param  DMA2Dx DMA2D Instance
  * @retval Green color value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN) >> DMA2D_FGCOLR_GREEN_Pos);
}

/**
  * @brief  Set DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGCOLR          BLUE          LL_DMA2D_FGND_SetBlueColor
  * @param  DMA2Dx DMA2D Instance
  * @param  Blue Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue)
{
  MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE, Blue);
}

/**
  * @brief  Return DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGCOLR          BLUE         LL_DMA2D_FGND_GetBlueColor
  * @param  DMA2Dx DMA2D Instance
  * @retval Blue color value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE));
}

/**
  * @brief  Set DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll FGCMAR          MA          LL_DMA2D_FGND_SetCLUTMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @param  CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress)
{
  LL_DMA2D_WriteReg(DMA2Dx, FGCMAR, CLUTMemoryAddress);
}

/**
  * @brief  Get DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll FGCMAR          MA          LL_DMA2D_FGND_GetCLUTMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @retval Foreground CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGCMAR));
}

/**
  * @brief  Set DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGPFCCR          CS          LL_DMA2D_FGND_SetCLUTSize
  * @param  DMA2Dx DMA2D Instance
  * @param  CLUTSize Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize)
{
  MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS, (CLUTSize << DMA2D_FGPFCCR_CS_Pos));
}

/**
  * @brief  Get DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits).
  * @rmtoll FGPFCCR          CS          LL_DMA2D_FGND_GetCLUTSize
  * @param  DMA2Dx DMA2D Instance
  * @retval Foreground CLUT size value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS) >> DMA2D_FGPFCCR_CS_Pos);
}

/**
  * @brief  Set DMA2D foreground CLUT color mode.
  * @rmtoll FGPFCCR          CCM          LL_DMA2D_FGND_SetCLUTColorMode
  * @param  DMA2Dx DMA2D Instance
  * @param  CLUTColorMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_FGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode)
{
  MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM, CLUTColorMode);
}

/**
  * @brief  Return DMA2D foreground CLUT color mode.
  * @rmtoll FGPFCCR          CCM         LL_DMA2D_FGND_GetCLUTColorMode
  * @param  DMA2Dx DMA2D Instance
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888
  */
__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM));
}

/**
  * @}
  */

/** @defgroup DMA2D_LL_EF_BGND_Configuration Background Configuration Functions
  * @{
  */

/**
  * @brief  Set DMA2D background memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll BGMAR          MA          LL_DMA2D_BGND_SetMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @param  MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress)
{
  LL_DMA2D_WriteReg(DMA2Dx, BGMAR, MemoryAddress);
}

/**
  * @brief  Get DMA2D background memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll BGMAR          MA          LL_DMA2D_BGND_GetMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @retval Background memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF
  */
__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGMAR));
}

/**
  * @brief  Enable DMA2D background CLUT loading.
  * @rmtoll BGPFCCR          START            LL_DMA2D_BGND_EnableCLUTLoad
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START);
}

/**
  * @brief  Indicate if DMA2D background CLUT loading is enabled.
  * @rmtoll BGPFCCR          START            LL_DMA2D_BGND_IsEnabledCLUTLoad
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_BGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START) == (DMA2D_BGPFCCR_START));
}

/**
  * @brief  Set DMA2D background color mode.
  * @rmtoll BGPFCCR          CM          LL_DMA2D_BGND_SetColorMode
  * @param  DMA2Dx DMA2D Instance
  * @param  ColorMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_INPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_INPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444
  *         @arg @ref LL_DMA2D_INPUT_MODE_L8
  *         @arg @ref LL_DMA2D_INPUT_MODE_AL44
  *         @arg @ref LL_DMA2D_INPUT_MODE_AL88
  *         @arg @ref LL_DMA2D_INPUT_MODE_L4
  *         @arg @ref LL_DMA2D_INPUT_MODE_A8
  *         @arg @ref LL_DMA2D_INPUT_MODE_A4
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)
{
  MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM, ColorMode);
}

/**
  * @brief  Return DMA2D background color mode.
  * @rmtoll BGPFCCR          CM          LL_DMA2D_BGND_GetColorMode
  * @param  DMA2Dx DMA2D Instance
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_INPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_INPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444
  *         @arg @ref LL_DMA2D_INPUT_MODE_L8
  *         @arg @ref LL_DMA2D_INPUT_MODE_AL44
  *         @arg @ref LL_DMA2D_INPUT_MODE_AL88
  *         @arg @ref LL_DMA2D_INPUT_MODE_L4
  *         @arg @ref LL_DMA2D_INPUT_MODE_A8
  *         @arg @ref LL_DMA2D_INPUT_MODE_A4
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetColorMode(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM));
}

/**
  * @brief  Set DMA2D background alpha mode.
  * @rmtoll BGPFCCR          AM         LL_DMA2D_BGND_SetAlphaMode
  * @param  DMA2Dx DMA2D Instance
  * @param  AphaMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF
  *         @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE
  *         @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode)
{
  MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM, AphaMode);
}

/**
  * @brief  Return DMA2D background alpha mode.
  * @rmtoll BGPFCCR          AM          LL_DMA2D_BGND_GetAlphaMode
  * @param  DMA2Dx DMA2D Instance
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF
  *         @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE
  *         @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM));
}

/**
  * @brief  Set DMA2D background alpha value, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGPFCCR          ALPHA         LL_DMA2D_BGND_SetAlpha
  * @param  DMA2Dx DMA2D Instance
  * @param  Alpha Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha)
{
  MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA, (Alpha << DMA2D_BGPFCCR_ALPHA_Pos));
}

/**
  * @brief  Return DMA2D background alpha value, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGPFCCR          ALPHA          LL_DMA2D_BGND_GetAlpha
  * @param  DMA2Dx DMA2D Instance
  * @retval Alpha value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetAlpha(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA) >> DMA2D_BGPFCCR_ALPHA_Pos);
}

/**
  * @brief  Set DMA2D background line offset, expressed on 14 bits ([13:0] bits).
  * @rmtoll BGOR          LO         LL_DMA2D_BGND_SetLineOffset
  * @param  DMA2Dx DMA2D Instance
  * @param  LineOffset Value between Min_Data=0 and Max_Data=0x3FF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset)
{
  MODIFY_REG(DMA2Dx->BGOR, DMA2D_BGOR_LO, LineOffset);
}

/**
  * @brief  Return DMA2D background line offset, expressed on 14 bits ([13:0] bits).
  * @rmtoll BGOR          LO          LL_DMA2D_BGND_GetLineOffset
  * @param  DMA2Dx DMA2D Instance
  * @retval Background line offset value between Min_Data=0 and Max_Data=0x3FF
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->BGOR, DMA2D_BGOR_LO));
}

/**
  * @brief  Set DMA2D background color values, expressed on 24 bits ([23:0] bits).
  * @rmtoll BGCOLR          RED          LL_DMA2D_BGND_SetColor
  * @rmtoll BGCOLR          GREEN        LL_DMA2D_BGND_SetColor
  * @rmtoll BGCOLR          BLUE         LL_DMA2D_BGND_SetColor
  * @param  DMA2Dx DMA2D Instance
  * @param  Red   Value between Min_Data=0 and Max_Data=0xFF
  * @param  Green Value between Min_Data=0 and Max_Data=0xFF
  * @param  Blue  Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue)
{
  MODIFY_REG(DMA2Dx->BGCOLR, (DMA2D_BGCOLR_RED | DMA2D_BGCOLR_GREEN | DMA2D_BGCOLR_BLUE), \
             ((Red << DMA2D_BGCOLR_RED_Pos) | (Green << DMA2D_BGCOLR_GREEN_Pos) | Blue));
}

/**
  * @brief  Set DMA2D background red color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGCOLR          RED         LL_DMA2D_BGND_SetRedColor
  * @param  DMA2Dx DMA2D Instance
  * @param  Red Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red)
{
  MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED, (Red << DMA2D_BGCOLR_RED_Pos));
}

/**
  * @brief  Return DMA2D background red color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGCOLR          RED          LL_DMA2D_BGND_GetRedColor
  * @param  DMA2Dx DMA2D Instance
  * @retval Red color value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetRedColor(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED) >> DMA2D_BGCOLR_RED_Pos);
}

/**
  * @brief  Set DMA2D background green color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGCOLR          GREEN         LL_DMA2D_BGND_SetGreenColor
  * @param  DMA2Dx DMA2D Instance
  * @param  Green Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green)
{
  MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN, (Green << DMA2D_BGCOLR_GREEN_Pos));
}

/**
  * @brief  Return DMA2D background green color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGCOLR          GREEN          LL_DMA2D_BGND_GetGreenColor
  * @param  DMA2Dx DMA2D Instance
  * @retval Green color value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN) >> DMA2D_BGCOLR_GREEN_Pos);
}

/**
  * @brief  Set DMA2D background blue color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGCOLR          BLUE         LL_DMA2D_BGND_SetBlueColor
  * @param  DMA2Dx DMA2D Instance
  * @param  Blue Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue)
{
  MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE, Blue);
}

/**
  * @brief  Return DMA2D background blue color value, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGCOLR          BLUE          LL_DMA2D_BGND_GetBlueColor
  * @param  DMA2Dx DMA2D Instance
  * @retval Blue color value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE));
}

/**
  * @brief  Set DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll BGCMAR          MA         LL_DMA2D_BGND_SetCLUTMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @param  CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress)
{
  LL_DMA2D_WriteReg(DMA2Dx, BGCMAR, CLUTMemoryAddress);
}

/**
  * @brief  Get DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits).
  * @rmtoll BGCMAR          MA           LL_DMA2D_BGND_GetCLUTMemAddr
  * @param  DMA2Dx DMA2D Instance
  * @retval Background CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGCMAR));
}

/**
  * @brief  Set DMA2D background CLUT size, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGPFCCR          CS         LL_DMA2D_BGND_SetCLUTSize
  * @param  DMA2Dx DMA2D Instance
  * @param  CLUTSize Value between Min_Data=0 and Max_Data=0xFF
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize)
{
  MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS, (CLUTSize << DMA2D_BGPFCCR_CS_Pos));
}

/**
  * @brief  Get DMA2D background CLUT size, expressed on 8 bits ([7:0] bits).
  * @rmtoll BGPFCCR          CS           LL_DMA2D_BGND_GetCLUTSize
  * @param  DMA2Dx DMA2D Instance
  * @retval Background CLUT size value between Min_Data=0 and Max_Data=0xFF
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS) >> DMA2D_BGPFCCR_CS_Pos);
}

/**
  * @brief  Set DMA2D background CLUT color mode.
  * @rmtoll BGPFCCR          CCM         LL_DMA2D_BGND_SetCLUTColorMode
  * @param  DMA2Dx DMA2D Instance
  * @param  CLUTColorMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_BGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode)
{
  MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM, CLUTColorMode);
}

/**
  * @brief  Return DMA2D background CLUT color mode.
  * @rmtoll BGPFCCR          CCM          LL_DMA2D_BGND_GetCLUTColorMode
  * @param  DMA2Dx DMA2D Instance
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888
  */
__STATIC_INLINE uint32_t  LL_DMA2D_BGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx)
{
  return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM));
}

/**
  * @}
  */

/**
  * @}
  */


/** @defgroup DMA2D_LL_EF_FLAG_MANAGEMENT Flag Management
  * @{
  */

/**
  * @brief  Check if the DMA2D Configuration Error Interrupt Flag is set or not
  * @rmtoll ISR          CEIF            LL_DMA2D_IsActiveFlag_CE
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CE(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CEIF) == (DMA2D_ISR_CEIF));
}

/**
  * @brief  Check if the DMA2D CLUT Transfer Complete Interrupt Flag is set or not
  * @rmtoll ISR          CTCIF            LL_DMA2D_IsActiveFlag_CTC
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CTC(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CTCIF) == (DMA2D_ISR_CTCIF));
}

/**
  * @brief  Check if the DMA2D CLUT Access Error Interrupt Flag is set or not
  * @rmtoll ISR          CAEIF            LL_DMA2D_IsActiveFlag_CAE
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CAE(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CAEIF) == (DMA2D_ISR_CAEIF));
}

/**
  * @brief  Check if the DMA2D Transfer Watermark Interrupt Flag is set or not
  * @rmtoll ISR          TWIF            LL_DMA2D_IsActiveFlag_TW
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TW(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TWIF) == (DMA2D_ISR_TWIF));
}

/**
  * @brief  Check if the DMA2D Transfer Complete Interrupt Flag is set or not
  * @rmtoll ISR          TCIF            LL_DMA2D_IsActiveFlag_TC
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TC(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TCIF) == (DMA2D_ISR_TCIF));
}

/**
  * @brief  Check if the DMA2D Transfer Error Interrupt Flag is set or not
  * @rmtoll ISR          TEIF            LL_DMA2D_IsActiveFlag_TE
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TE(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TEIF) == (DMA2D_ISR_TEIF));
}

/**
  * @brief  Clear DMA2D Configuration Error Interrupt Flag
  * @rmtoll IFCR          CCEIF          LL_DMA2D_ClearFlag_CE
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_ClearFlag_CE(DMA2D_TypeDef *DMA2Dx)
{
  WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCEIF);
}

/**
  * @brief  Clear DMA2D CLUT Transfer Complete Interrupt Flag
  * @rmtoll IFCR          CCTCIF          LL_DMA2D_ClearFlag_CTC
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_ClearFlag_CTC(DMA2D_TypeDef *DMA2Dx)
{
  WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCTCIF);
}

/**
  * @brief  Clear DMA2D CLUT Access Error Interrupt Flag
  * @rmtoll IFCR          CAECIF          LL_DMA2D_ClearFlag_CAE
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_ClearFlag_CAE(DMA2D_TypeDef *DMA2Dx)
{
  WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CAECIF);
}

/**
  * @brief  Clear DMA2D Transfer Watermark Interrupt Flag
  * @rmtoll IFCR          CTWIF          LL_DMA2D_ClearFlag_TW
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_ClearFlag_TW(DMA2D_TypeDef *DMA2Dx)
{
  WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTWIF);
}

/**
  * @brief  Clear DMA2D Transfer Complete Interrupt Flag
  * @rmtoll IFCR          CTCIF          LL_DMA2D_ClearFlag_TC
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_ClearFlag_TC(DMA2D_TypeDef *DMA2Dx)
{
  WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTCIF);
}

/**
  * @brief  Clear DMA2D Transfer Error Interrupt Flag
  * @rmtoll IFCR          CTEIF          LL_DMA2D_ClearFlag_TE
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_ClearFlag_TE(DMA2D_TypeDef *DMA2Dx)
{
  WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTEIF);
}

/**
  * @}
  */

/** @defgroup DMA2D_LL_EF_IT_MANAGEMENT Interruption Management
  * @{
  */

/**
  * @brief  Enable Configuration Error Interrupt
  * @rmtoll CR          CEIE        LL_DMA2D_EnableIT_CE
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_EnableIT_CE(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->CR, DMA2D_CR_CEIE);
}

/**
  * @brief  Enable CLUT Transfer Complete Interrupt
  * @rmtoll CR          CTCIE        LL_DMA2D_EnableIT_CTC
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_EnableIT_CTC(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE);
}

/**
  * @brief  Enable CLUT Access Error Interrupt
  * @rmtoll CR          CAEIE        LL_DMA2D_EnableIT_CAE
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_EnableIT_CAE(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE);
}

/**
  * @brief  Enable Transfer Watermark Interrupt
  * @rmtoll CR          TWIE        LL_DMA2D_EnableIT_TW
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_EnableIT_TW(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->CR, DMA2D_CR_TWIE);
}

/**
  * @brief  Enable Transfer Complete Interrupt
  * @rmtoll CR          TCIE        LL_DMA2D_EnableIT_TC
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_EnableIT_TC(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->CR, DMA2D_CR_TCIE);
}

/**
  * @brief  Enable Transfer Error Interrupt
  * @rmtoll CR          TEIE        LL_DMA2D_EnableIT_TE
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_EnableIT_TE(DMA2D_TypeDef *DMA2Dx)
{
  SET_BIT(DMA2Dx->CR, DMA2D_CR_TEIE);
}

/**
  * @brief  Disable Configuration Error Interrupt
  * @rmtoll CR          CEIE        LL_DMA2D_DisableIT_CE
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_DisableIT_CE(DMA2D_TypeDef *DMA2Dx)
{
  CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CEIE);
}

/**
  * @brief  Disable CLUT Transfer Complete Interrupt
  * @rmtoll CR          CTCIE        LL_DMA2D_DisableIT_CTC
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_DisableIT_CTC(DMA2D_TypeDef *DMA2Dx)
{
  CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE);
}

/**
  * @brief  Disable CLUT Access Error Interrupt
  * @rmtoll CR          CAEIE        LL_DMA2D_DisableIT_CAE
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_DisableIT_CAE(DMA2D_TypeDef *DMA2Dx)
{
  CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE);
}

/**
  * @brief  Disable Transfer Watermark Interrupt
  * @rmtoll CR          TWIE        LL_DMA2D_DisableIT_TW
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_DisableIT_TW(DMA2D_TypeDef *DMA2Dx)
{
  CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TWIE);
}

/**
  * @brief  Disable Transfer Complete Interrupt
  * @rmtoll CR          TCIE        LL_DMA2D_DisableIT_TC
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_DisableIT_TC(DMA2D_TypeDef *DMA2Dx)
{
  CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TCIE);
}

/**
  * @brief  Disable Transfer Error Interrupt
  * @rmtoll CR          TEIE        LL_DMA2D_DisableIT_TE
  * @param  DMA2Dx DMA2D Instance
  * @retval None
  */
__STATIC_INLINE void LL_DMA2D_DisableIT_TE(DMA2D_TypeDef *DMA2Dx)
{
  CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TEIE);
}

/**
  * @brief  Check if the DMA2D Configuration Error interrupt source is enabled or disabled.
  * @rmtoll CR          CEIE        LL_DMA2D_IsEnabledIT_CE
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CE(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CEIE) == (DMA2D_CR_CEIE));
}

/**
  * @brief  Check if the DMA2D CLUT Transfer Complete interrupt source is enabled or disabled.
  * @rmtoll CR          CTCIE        LL_DMA2D_IsEnabledIT_CTC
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CTC(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE) == (DMA2D_CR_CTCIE));
}

/**
  * @brief  Check if the DMA2D CLUT Access Error interrupt source is enabled or disabled.
  * @rmtoll CR          CAEIE        LL_DMA2D_IsEnabledIT_CAE
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CAE(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE) == (DMA2D_CR_CAEIE));
}

/**
  * @brief  Check if the DMA2D Transfer Watermark interrupt source is enabled or disabled.
  * @rmtoll CR          TWIE        LL_DMA2D_IsEnabledIT_TW
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TW(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TWIE) == (DMA2D_CR_TWIE));
}

/**
  * @brief  Check if the DMA2D Transfer Complete interrupt source is enabled or disabled.
  * @rmtoll CR          TCIE        LL_DMA2D_IsEnabledIT_TC
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TC(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TCIE) == (DMA2D_CR_TCIE));
}

/**
  * @brief  Check if the DMA2D Transfer Error interrupt source is enabled or disabled.
  * @rmtoll CR          TEIE        LL_DMA2D_IsEnabledIT_TE
  * @param  DMA2Dx DMA2D Instance
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TE(DMA2D_TypeDef *DMA2Dx)
{
  return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TEIE) == (DMA2D_CR_TEIE));
}



/**
  * @}
  */

#if defined(USE_FULL_LL_DRIVER)
/** @defgroup DMA2D_LL_EF_Init_Functions Initialization and De-initialization Functions
  * @{
  */

ErrorStatus LL_DMA2D_DeInit(DMA2D_TypeDef *DMA2Dx);
ErrorStatus LL_DMA2D_Init(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_InitTypeDef *DMA2D_InitStruct);
void LL_DMA2D_StructInit(LL_DMA2D_InitTypeDef *DMA2D_InitStruct);
void LL_DMA2D_ConfigLayer(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg, uint32_t LayerIdx);
void LL_DMA2D_LayerCfgStructInit(LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg);
void LL_DMA2D_ConfigOutputColor(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_ColorTypeDef *DMA2D_ColorStruct);
uint32_t LL_DMA2D_GetOutputBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode);
uint32_t LL_DMA2D_GetOutputGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode);
uint32_t LL_DMA2D_GetOutputRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode);
uint32_t LL_DMA2D_GetOutputAlphaColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode);
void LL_DMA2D_ConfigSize(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines, uint32_t NbrOfPixelsPerLines);

/**
  * @}
  */
#endif /* USE_FULL_LL_DRIVER */

/**
  * @}
  */

/**
  * @}
  */

#endif /* defined (DMA2D) */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F4xx_LL_DMA2D_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/