Mercurial > public > ostc4
view RefPrj/RTE/.cproject @ 989:c317130aaafc GasConsumption
OSTC4/5 joined code:
In the previous version code differences between OSTC4/5 were identified using the ENABLE_GPIO_V2 compiler switch. In the new version this is done using the display version as indicator which OSTC model is in used. Since this is detected by Firmware the information is forwarded from there to the RTE. This causes a little delay in the GPIO initialization but this applies only to the cold start of the RTE which should not happen very often.
| author | ideenmodellierer |
|---|---|
| date | Tue, 08 Apr 2025 15:10:14 +0200 |
| parents | 61f14abce25d |
| children |
line wrap: on
line source
<?xml version="1.0" encoding="UTF-8" standalone="no"?> <?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> <storageModule moduleId="org.eclipse.cdt.core.settings"> <cconfiguration id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687" moduleId="org.eclipse.cdt.core.settings" name="Debug"> <externalSettings/> <extensions> <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/> <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> </extensions> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687" name="Debug" parent="fr.ac6.managedbuild.config.gnu.cross.exe.debug" postannouncebuildStep="Generating binary and Printing size information:" postbuildStep="arm-none-eabi-objcopy -O binary "${BuildArtifactFileBaseName}.elf" "${BuildArtifactFileBaseName}.bin"; arm-none-eabi-size "${BuildArtifactFileName}""> <folderInfo id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687." name="/" resourcePath=""> <toolChain id="fr.ac6.managedbuild.toolchain.gnu.cross.exe.debug.773919339" name="Ac6 STM32 MCU GCC" superClass="fr.ac6.managedbuild.toolchain.gnu.cross.exe.debug"> <option id="fr.ac6.managedbuild.option.gnu.cross.mcu.1069997727" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" useByScannerDiscovery="false" value="STM32F411RETx" valueType="string"/> <option id="fr.ac6.managedbuild.option.gnu.cross.fpu.1337322285" name="Floating point hardware" superClass="fr.ac6.managedbuild.option.gnu.cross.fpu" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.fpu.fpv4-sp-d16" valueType="enumerated"/> <option id="fr.ac6.managedbuild.option.gnu.cross.floatabi.2128124622" name="Floating-point ABI" superClass="fr.ac6.managedbuild.option.gnu.cross.floatabi" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.floatabi.hard" valueType="enumerated"/> <option id="fr.ac6.managedbuild.option.gnu.cross.board.719527989" name="Board" superClass="fr.ac6.managedbuild.option.gnu.cross.board" useByScannerDiscovery="false" value="OSTC4_RTE2" valueType="string"/> <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="fr.ac6.managedbuild.targetPlatform.gnu.cross.2036507469" isAbstract="false" osList="all" superClass="fr.ac6.managedbuild.targetPlatform.gnu.cross"/> <builder buildPath="${workspace_loc:/OSTC4_RTE}/Debug" id="fr.ac6.managedbuild.builder.gnu.cross.646520610" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="fr.ac6.managedbuild.builder.gnu.cross"/> <tool id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1064816811" name="MCU GCC Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler"> <option id="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level.587576579" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.c.optimization.level.debug" valueType="enumerated"/> <option id="gnu.c.compiler.option.debugging.level.493106502" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.max" valueType="enumerated"/> <option id="gnu.c.compiler.option.preprocessor.def.symbols.1649922014" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" useByScannerDiscovery="false" valueType="definedSymbols"> <listOptionValue builtIn="false" value="STM32"/> <listOptionValue builtIn="false" value="STM32F4"/> <listOptionValue builtIn="false" value="STM32F411xE"/> </option> <option id="gnu.c.compiler.option.include.paths.1618459940" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" useByScannerDiscovery="false" valueType="includePath"> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Small_CPU/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Discovery/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/STM32F4xx_HAL_Driver/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/STM32F4xx/Include}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/CMSIS/Include}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Inc}""/> </option> <option id="gnu.c.compiler.option.dialect.std.224885314" name="Language standard" superClass="gnu.c.compiler.option.dialect.std" useByScannerDiscovery="true" value="gnu.c.compiler.dialect.default" valueType="enumerated"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.2126749510" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s.1160433093" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s"/> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.697561463" name="MCU G++ Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler"> <option id="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level.453622205" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/> <option id="gnu.cpp.compiler.option.debugging.level.1059605192" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated"/> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.829628376" name="MCU GCC Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker"> <option id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script.1343275553" name="Linker Script (-T)" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script" useByScannerDiscovery="false" value="${ProjDirPath}/../ostc4/Small_CPU/CPU2-RTE.ld" valueType="string"/> <option id="gnu.c.link.option.nodeflibs.1383905067" name="Do not use default libraries (-nodefaultlibs)" superClass="gnu.c.link.option.nodeflibs" useByScannerDiscovery="false" value="false" valueType="boolean"/> <inputType id="cdt.managedbuild.tool.gnu.c.linker.input.60862160" superClass="cdt.managedbuild.tool.gnu.c.linker.input"> <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> <additionalInput kind="additionalinput" paths="$(LIBS)"/> </inputType> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker.234916389" name="MCU G++ Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker"/> <tool id="fr.ac6.managedbuild.tool.gnu.archiver.885152779" name="MCU GCC Archiver" superClass="fr.ac6.managedbuild.tool.gnu.archiver"/> <tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.806069457" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler"> <inputType id="cdt.managedbuild.tool.gnu.assembler.input.1281355774" superClass="cdt.managedbuild.tool.gnu.assembler.input"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.1270831598" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input"/> </tool> </toolChain> </folderInfo> <sourceEntries> <entry excluding="Drivers/STM32F4xx/Source/Templates/system_stm32f4xx.c|Drivers/STM32F4xx/Source/Templates/iar|Drivers/STM32F4xx/Source/Templates/gcc|Drivers/STM32F4xx/Source/Templates/arm|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_tim_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_wakeup_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_alarm_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c|Drivers/STM32F4xx_v220/Source/Templates|Drivers/STM32F4xx_HAL_DRIVER_v120/Src/stm32f4xx_hal_msp_template.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Common"/> <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Small_CPU"/> </sourceEntries> </configuration> </storageModule> <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> </cconfiguration> <cconfiguration id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035" moduleId="org.eclipse.cdt.core.settings" name="Release"> <externalSettings/> <extensions> <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/> <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> </extensions> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035" name="Release" parent="fr.ac6.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary and Printing size information:" postbuildStep="arm-none-eabi-objcopy -O binary "${BuildArtifactFileBaseName}.elf" "${BuildArtifactFileBaseName}.bin"; arm-none-eabi-size -B "${BuildArtifactFileName}""> <folderInfo id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035." name="/" resourcePath=""> <toolChain id="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release.644592221" name="Ac6 STM32 MCU GCC" superClass="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release"> <option id="fr.ac6.managedbuild.option.gnu.cross.mcu.981843125" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" useByScannerDiscovery="false" value="STM32F411RETx" valueType="string"/> <option id="fr.ac6.managedbuild.option.gnu.cross.fpu.795390711" name="Floating point hardware" superClass="fr.ac6.managedbuild.option.gnu.cross.fpu" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.fpu.fpv4-sp-d16" valueType="enumerated"/> <option id="fr.ac6.managedbuild.option.gnu.cross.floatabi.195981684" name="Floating-point ABI" superClass="fr.ac6.managedbuild.option.gnu.cross.floatabi" useByScannerDiscovery="false" value="fr.ac6.managedbuild.option.gnu.cross.floatabi.hard" valueType="enumerated"/> <option id="fr.ac6.managedbuild.option.gnu.cross.board.851813776" name="Board" superClass="fr.ac6.managedbuild.option.gnu.cross.board" useByScannerDiscovery="false" value="OTSTC4_RTE" valueType="string"/> <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="fr.ac6.managedbuild.targetPlatform.gnu.cross.2038367534" isAbstract="false" osList="all" superClass="fr.ac6.managedbuild.targetPlatform.gnu.cross"/> <builder buildPath="${workspace_loc:/OSTC4_RTE}/Release" id="fr.ac6.managedbuild.builder.gnu.cross.402721682" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="fr.ac6.managedbuild.builder.gnu.cross"/> <tool id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1223896604" name="MCU GCC Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler"> <option id="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level.1077587409" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.c.optimization.level.more" valueType="enumerated"/> <option id="gnu.c.compiler.option.debugging.level.1256562145" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.none" valueType="enumerated"/> <option id="gnu.c.compiler.option.preprocessor.def.symbols.787678213" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" useByScannerDiscovery="false" valueType="definedSymbols"> <listOptionValue builtIn="false" value="STM32"/> <listOptionValue builtIn="false" value="STM32F4"/> <listOptionValue builtIn="false" value="STM32F411xE"/> </option> <option id="gnu.c.compiler.option.include.paths.1685792522" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" useByScannerDiscovery="false" valueType="includePath"> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Small_CPU/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Discovery/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/STM32F4xx_HAL_Driver/Inc}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/STM32F4xx/Include}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Drivers/CMSIS/Include}""/> <listOptionValue builtIn="false" value=""${workspace_loc:/ostc4/Common/Inc}""/> </option> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.925384553" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s.1417131239" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s"/> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.1725959452" name="MCU G++ Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler"> <option id="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level.352827930" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.cpp.optimization.level.most" valueType="enumerated"/> <option id="gnu.cpp.compiler.option.debugging.level.1980132124" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.none" valueType="enumerated"/> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.1224776758" name="MCU GCC Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker"> <option id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script.477531566" name="Linker Script (-T)" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker.script" useByScannerDiscovery="false" value="${ProjDirPath}/../../Small_CPU/CPU2-RTE.ld" valueType="string"/> <option id="gnu.c.link.option.nodeflibs.1006660034" name="Do not use default libraries (-nodefaultlibs)" superClass="gnu.c.link.option.nodeflibs" useByScannerDiscovery="false" value="false" valueType="boolean"/> <inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1337752943" superClass="cdt.managedbuild.tool.gnu.c.linker.input"> <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> <additionalInput kind="additionalinput" paths="$(LIBS)"/> </inputType> </tool> <tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker.310177802" name="MCU G++ Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker"/> <tool id="fr.ac6.managedbuild.tool.gnu.archiver.1360710289" name="MCU GCC Archiver" superClass="fr.ac6.managedbuild.tool.gnu.archiver"/> <tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.exe.release.2054790329" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.exe.release"> <inputType id="cdt.managedbuild.tool.gnu.assembler.input.374478413" superClass="cdt.managedbuild.tool.gnu.assembler.input"/> <inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.1353421818" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input"/> </tool> </toolChain> </folderInfo> <sourceEntries> <entry excluding="Drivers/STM32F4xx/Source/Templates/system_stm32f4xx.c|Drivers/STM32F4xx/Source/Templates/iar|Drivers/STM32F4xx/Source/Templates/gcc|Drivers/STM32F4xx/Source/Templates/arm|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_tim_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_wakeup_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_timebase_rtc_alarm_template.c|Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c|Drivers/STM32F4xx_v220/Source/Templates|Drivers/STM32F4xx_HAL_DRIVER_v120/Src/stm32f4xx_hal_msp_template.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Common"/> <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Small_CPU"/> </sourceEntries> </configuration> </storageModule> <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> </cconfiguration> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> <project id="OSTC4_RTE.fr.ac6.managedbuild.target.gnu.cross.exe.126223660" name="Executable" projectType="fr.ac6.managedbuild.target.gnu.cross.exe"/> </storageModule> <storageModule moduleId="scannerConfiguration"> <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> <scannerConfigBuildInfo instanceId="fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687;fr.ac6.managedbuild.config.gnu.cross.exe.debug.2145655687.;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1064816811;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.2126749510"> <autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/> </scannerConfigBuildInfo> <scannerConfigBuildInfo instanceId="fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035;fr.ac6.managedbuild.config.gnu.cross.exe.release.1176875035.;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1223896604;fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.925384553"> <autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/> </scannerConfigBuildInfo> </storageModule> <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/> <storageModule moduleId="refreshScope" versionNumber="2"> <configuration configurationName="Multiple configurations"> <resource resourceType="PROJECT" workspacePath="/OSTC4_RTE"/> </configuration> <configuration configurationName="Debug"> <resource resourceType="PROJECT" workspacePath="/OSTC4_RTE"/> </configuration> <configuration configurationName="Release"> <resource resourceType="PROJECT" workspacePath="/OSTC4_RTE"/> </configuration> </storageModule> <storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/> <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/> </cproject>