Mercurial > public > ostc4
view Small_CPU/Inc/i2c.h @ 335:c11ce8c885d3 PressureMeasure_Improvment
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
Additionaly a similar function has been added to the surface pressure capture to further reduce the jitter in long therm measurements (once a minute)
| author | ideenmodellierer |
|---|---|
| date | Tue, 13 Aug 2019 21:46:26 +0200 |
| parents | 9ecc2e60418d |
| children | cb3870f79e9d |
line wrap: on
line source
/* Define to prevent recursive inclusion -------------------------------------*/ #ifndef I2C_H #define I2C_H /* Pressure Sensor */ #define DEVICE_PRESSURE 0xEE // 2019 hardware (gen 3) will use 0xEC (MS5837), all other use 0xEE (MS5803) /* Compass/Accelerometer */ #define DEVICE_ACCELARATOR_MMA8452Q 0x38 // Hardware gen 1 (Two chip solution with MMA8452Q and HMC5883L) #define DEVICE_COMPASS_HMC5883L 0x3C // Hardware gen 1 #define DEVICE_COMPASS_303D 0x3C // Hardware gen 2 (Single chip solution LSM303D) #define DEVICE_COMPASS_303AGR 0x3C // Hardware gen 3 (Single chip solution LSM303AGR) /* Battery Gas Gauge */ #define DEVICE_BATTERYGAUGE 0xC8 // LTC2941 battery gauge /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" HAL_StatusTypeDef I2C_Master_Transmit( uint16_t DevAddress, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef I2C_Master_TransmitNoStop( uint16_t DevAddress, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef I2C_Master_Receive( uint16_t DevAddress, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef MX_I2C1_Init(void); void I2C_DeInit(void); HAL_StatusTypeDef I2C1_Status(void); GPIO_PinState MX_I2C1_TestAndClear(void); //void I2C_Error(void); #endif /* I2C_H */