Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c @ 250:822416168585 bm-2
Buelmann: new implementation for ceiling
Since my first functional fix in the ceiling computation in
commit ceecabfddb57, I noticed that the computation used a
linear search, that became rather computational expensive after
that commit. The simple question is: why not a binary search?
So, this commit implements the binary search. But there is a long
story attached to this. Comparing ceiling results from hwOS and this
OSTC4 code were very different. Basically, the original OSTC4
algorithm computed the ceiling using the same GFlow to GFhigh
slope, in such a way, that the ceiling was in sync with the
presented deco stops, where the hwOS code presents a GFhigh
based ceiling.
This said, it is more logical when the OSTC4 and hwOS code give
similar results. This new recursive algorithm gives very similar
results for the ceiling compared to hwOS.
To be complete here, the Buelmann ceiling is the depth to which
you can ascend, so that the leading tissue reaches GFhigh. This
also explains why the deepest deco stop is normally deeper than
the ceiling (unless one dives with GF like 80/80).
The code implemented here is rather straightforward recursion.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
| author | Jan Mulder <jlmulder@xs4all.nl> |
|---|---|
| date | Thu, 11 Apr 2019 17:48:48 +0200 |
| parents | c78bcbd5deda |
| children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_adc.c * @author MCD Application Team * @brief ADC LL module driver ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_ll_adc.h" #include "stm32f4xx_ll_bus.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) #endif /** @addtogroup STM32F4xx_LL_Driver * @{ */ #if defined (ADC1) || defined (ADC2) || defined (ADC3) /** @addtogroup ADC_LL ADC * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /** @addtogroup ADC_LL_Private_Macros * @{ */ /* Check of parameters for configuration of ADC hierarchical scope: */ /* common to several ADC instances. */ #define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ ( ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4) \ || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV6) \ || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV8) \ ) /* Check of parameters for configuration of ADC hierarchical scope: */ /* ADC instance. */ #define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ ( ((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B) \ || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B) \ ) #define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__) \ ( ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT) \ || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ ) #define IS_LL_ADC_SCAN_SELECTION(__SCAN_SELECTION__) \ ( ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_DISABLE) \ || ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_ENABLE) \ ) #define IS_LL_ADC_SEQ_SCAN_MODE(__SEQ_SCAN_MODE__) \ ( ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_DISABLE) \ || ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_ENABLE) \ ) /* Check of parameters for configuration of ADC hierarchical scope: */ /* ADC group regular */ #define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ ( ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH3) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH4) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_CH1) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH1) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH2) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH3) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_CH1) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_TRGO) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ ) #define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ ( ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS) \ ) #define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__) \ ( ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE) \ || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED) \ || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED) \ ) #define IS_LL_ADC_REG_FLAG_EOC_SELECTION(__REG_FLAG_EOC_SELECTION__) \ ( ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV) \ || ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_UNITARY_CONV) \ ) #define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ ( ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS) \ ) #define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ ( ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_2RANKS) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_3RANKS) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_4RANKS) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_5RANKS) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_6RANKS) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_7RANKS) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_8RANKS) \ ) /* Check of parameters for configuration of ADC hierarchical scope: */ /* ADC group injected */ #define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__) \ ( ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH2) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH1) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH2) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH3) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_CH4) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_TRGO) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH2) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH3) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH4) \ || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) \ ) #define IS_LL_ADC_INJ_TRIG_EXT_EDGE(__INJ_TRIG_EXT_EDGE__) \ ( ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISING) \ || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_FALLING) \ || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISINGFALLING) \ ) #define IS_LL_ADC_INJ_TRIG_AUTO(__INJ_TRIG_AUTO__) \ ( ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_INDEPENDENT) \ || ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_FROM_GRP_REGULAR) \ ) #define IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(__INJ_SEQ_SCAN_LENGTH__) \ ( ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_DISABLE) \ || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS) \ || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS) \ || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS) \ ) #define IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(__INJ_SEQ_DISCONT_MODE__) \ ( ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_DISABLE) \ || ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_1RANK) \ ) #if defined(ADC_MULTIMODE_SUPPORT) /* Check of parameters for configuration of ADC hierarchical scope: */ /* multimode. */ #if defined(ADC3) #define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__) \ ( ((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_INJ_SIMULT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIMULT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_INTERL) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_INJ_ALTERN) \ ) #else #define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__) \ ( ((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) \ || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) \ ) #endif #define IS_LL_ADC_MULTI_DMA_TRANSFER(__MULTI_DMA_TRANSFER__) \ ( ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_EACH_ADC) \ || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_1) \ || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_2) \ || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_3) \ || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_1) \ || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_2) \ || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_3) \ ) #define IS_LL_ADC_MULTI_TWOSMP_DELAY(__MULTI_TWOSMP_DELAY__) \ ( ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES) \ || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES) \ ) #define IS_LL_ADC_MULTI_MASTER_SLAVE(__MULTI_MASTER_SLAVE__) \ ( ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER) \ || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_SLAVE) \ || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER_SLAVE) \ ) #endif /* ADC_MULTIMODE_SUPPORT */ /** * @} */ /* Private function prototypes -----------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @addtogroup ADC_LL_Exported_Functions * @{ */ /** @addtogroup ADC_LL_EF_Init * @{ */ /** * @brief De-initialize registers of all ADC instances belonging to * the same ADC common instance to their default reset values. * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval An ErrorStatus enumeration value: * - SUCCESS: ADC common registers are de-initialized * - ERROR: not applicable */ ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON) { /* Check the parameters */ assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); /* Force reset of ADC clock (core clock) */ LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC); /* Release reset of ADC clock (core clock) */ LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC); return SUCCESS; } /** * @brief Initialize some features of ADC common parameters * (all ADC instances belonging to the same ADC common instance) * and multimode (for devices with several ADC instances available). * @note The setting of ADC common parameters is conditioned to * ADC instances state: * All ADC instances belonging to the same ADC common instance * must be disabled. * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure * @retval An ErrorStatus enumeration value: * - SUCCESS: ADC common registers are initialized * - ERROR: ADC common registers are not initialized */ ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) { ErrorStatus status = SUCCESS; /* Check the parameters */ assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock)); #if defined(ADC_MULTIMODE_SUPPORT) assert_param(IS_LL_ADC_MULTI_MODE(ADC_CommonInitStruct->Multimode)); if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) { assert_param(IS_LL_ADC_MULTI_DMA_TRANSFER(ADC_CommonInitStruct->MultiDMATransfer)); assert_param(IS_LL_ADC_MULTI_TWOSMP_DELAY(ADC_CommonInitStruct->MultiTwoSamplingDelay)); } #endif /* ADC_MULTIMODE_SUPPORT */ /* Note: Hardware constraint (refer to description of functions */ /* "LL_ADC_SetCommonXXX()" and "LL_ADC_SetMultiXXX()"): */ /* On this STM32 serie, setting of these features is conditioned to */ /* ADC state: */ /* All ADC instances of the ADC common group must be disabled. */ if(__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0U) { /* Configuration of ADC hierarchical scope: */ /* - common to several ADC */ /* (all ADC instances belonging to the same ADC common instance) */ /* - Set ADC clock (conversion clock) */ /* - multimode (if several ADC instances available on the */ /* selected device) */ /* - Set ADC multimode configuration */ /* - Set ADC multimode DMA transfer */ /* - Set ADC multimode: delay between 2 sampling phases */ #if defined(ADC_MULTIMODE_SUPPORT) if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) { MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_ADCPRE | ADC_CCR_MULTI | ADC_CCR_DMA | ADC_CCR_DDS | ADC_CCR_DELAY , ADC_CommonInitStruct->CommonClock | ADC_CommonInitStruct->Multimode | ADC_CommonInitStruct->MultiDMATransfer | ADC_CommonInitStruct->MultiTwoSamplingDelay ); } else { MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_ADCPRE | ADC_CCR_MULTI | ADC_CCR_DMA | ADC_CCR_DDS | ADC_CCR_DELAY , ADC_CommonInitStruct->CommonClock | LL_ADC_MULTI_INDEPENDENT ); } #else LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock); #endif } else { /* Initialization error: One or several ADC instances belonging to */ /* the same ADC common instance are not disabled. */ status = ERROR; } return status; } /** * @brief Set each @ref LL_ADC_CommonInitTypeDef field to default value. * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure * whose fields will be set to default values. * @retval None */ void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) { /* Set ADC_CommonInitStruct fields to default values */ /* Set fields of ADC common */ /* (all ADC instances belonging to the same ADC common instance) */ ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; #if defined(ADC_MULTIMODE_SUPPORT) /* Set fields of ADC multimode */ ADC_CommonInitStruct->Multimode = LL_ADC_MULTI_INDEPENDENT; ADC_CommonInitStruct->MultiDMATransfer = LL_ADC_MULTI_REG_DMA_EACH_ADC; ADC_CommonInitStruct->MultiTwoSamplingDelay = LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES; #endif /* ADC_MULTIMODE_SUPPORT */ } /** * @brief De-initialize registers of the selected ADC instance * to their default reset values. * @note To reset all ADC instances quickly (perform a hard reset), * use function @ref LL_ADC_CommonDeInit(). * @param ADCx ADC instance * @retval An ErrorStatus enumeration value: * - SUCCESS: ADC registers are de-initialized * - ERROR: ADC registers are not de-initialized */ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) { ErrorStatus status = SUCCESS; /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(ADCx)); /* Disable ADC instance if not already disabled. */ if(LL_ADC_IsEnabled(ADCx) == 1U) { /* Set ADC group regular trigger source to SW start to ensure to not */ /* have an external trigger event occurring during the conversion stop */ /* ADC disable process. */ LL_ADC_REG_SetTriggerSource(ADCx, LL_ADC_REG_TRIG_SOFTWARE); /* Set ADC group injected trigger source to SW start to ensure to not */ /* have an external trigger event occurring during the conversion stop */ /* ADC disable process. */ LL_ADC_INJ_SetTriggerSource(ADCx, LL_ADC_INJ_TRIG_SOFTWARE); /* Disable the ADC instance */ LL_ADC_Disable(ADCx); } /* Check whether ADC state is compliant with expected state */ /* (hardware requirements of bits state to reset registers below) */ if(READ_BIT(ADCx->CR2, ADC_CR2_ADON) == 0U) { /* ========== Reset ADC registers ========== */ /* Reset register SR */ CLEAR_BIT(ADCx->SR, ( LL_ADC_FLAG_STRT | LL_ADC_FLAG_JSTRT | LL_ADC_FLAG_EOCS | LL_ADC_FLAG_OVR | LL_ADC_FLAG_JEOS | LL_ADC_FLAG_AWD1 ) ); /* Reset register CR1 */ CLEAR_BIT(ADCx->CR1, ( ADC_CR1_OVRIE | ADC_CR1_RES | ADC_CR1_AWDEN | ADC_CR1_JAWDEN | ADC_CR1_DISCNUM | ADC_CR1_JDISCEN | ADC_CR1_DISCEN | ADC_CR1_JAUTO | ADC_CR1_AWDSGL | ADC_CR1_SCAN | ADC_CR1_JEOCIE | ADC_CR1_AWDIE | ADC_CR1_EOCIE | ADC_CR1_AWDCH ) ); /* Reset register CR2 */ CLEAR_BIT(ADCx->CR2, ( ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL | ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL | ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | ADC_CR2_DMA | ADC_CR2_CONT | ADC_CR2_ADON ) ); /* Reset register SMPR1 */ CLEAR_BIT(ADCx->SMPR1, ( ADC_SMPR1_SMP18 | ADC_SMPR1_SMP17 | ADC_SMPR1_SMP16 | ADC_SMPR1_SMP15 | ADC_SMPR1_SMP14 | ADC_SMPR1_SMP13 | ADC_SMPR1_SMP12 | ADC_SMPR1_SMP11 | ADC_SMPR1_SMP10) ); /* Reset register SMPR2 */ CLEAR_BIT(ADCx->SMPR2, ( ADC_SMPR2_SMP9 | ADC_SMPR2_SMP8 | ADC_SMPR2_SMP7 | ADC_SMPR2_SMP6 | ADC_SMPR2_SMP5 | ADC_SMPR2_SMP4 | ADC_SMPR2_SMP3 | ADC_SMPR2_SMP2 | ADC_SMPR2_SMP1 | ADC_SMPR2_SMP0) ); /* Reset register JOFR1 */ CLEAR_BIT(ADCx->JOFR1, ADC_JOFR1_JOFFSET1); /* Reset register JOFR2 */ CLEAR_BIT(ADCx->JOFR2, ADC_JOFR2_JOFFSET2); /* Reset register JOFR3 */ CLEAR_BIT(ADCx->JOFR3, ADC_JOFR3_JOFFSET3); /* Reset register JOFR4 */ CLEAR_BIT(ADCx->JOFR4, ADC_JOFR4_JOFFSET4); /* Reset register HTR */ SET_BIT(ADCx->HTR, ADC_HTR_HT); /* Reset register LTR */ CLEAR_BIT(ADCx->LTR, ADC_LTR_LT); /* Reset register SQR1 */ CLEAR_BIT(ADCx->SQR1, ( ADC_SQR1_L | ADC_SQR1_SQ16 | ADC_SQR1_SQ15 | ADC_SQR1_SQ14 | ADC_SQR1_SQ13) ); /* Reset register SQR2 */ CLEAR_BIT(ADCx->SQR2, ( ADC_SQR2_SQ12 | ADC_SQR2_SQ11 | ADC_SQR2_SQ10 | ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7) ); /* Reset register JSQR */ CLEAR_BIT(ADCx->JSQR, ( ADC_JSQR_JL | ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3 | ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1 ) ); /* Reset register DR */ /* bits in access mode read only, no direct reset applicable */ /* Reset registers JDR1, JDR2, JDR3, JDR4 */ /* bits in access mode read only, no direct reset applicable */ /* Reset register CCR */ CLEAR_BIT(ADC->CCR, ADC_CCR_TSVREFE | ADC_CCR_ADCPRE); } return status; } /** * @brief Initialize some features of ADC instance. * @note These parameters have an impact on ADC scope: ADC instance. * Affects both group regular and group injected (availability * of ADC group injected depends on STM32 families). * Refer to corresponding unitary functions into * @ref ADC_LL_EF_Configuration_ADC_Instance . * @note The setting of these parameters by function @ref LL_ADC_Init() * is conditioned to ADC state: * ADC instance must be disabled. * This condition is applied to all ADC features, for efficiency * and compatibility over all STM32 families. However, the different * features can be set under different ADC state conditions * (setting possible with ADC enabled without conversion on going, * ADC enabled with conversion on going, ...) * Each feature can be updated afterwards with a unitary function * and potentially with ADC in a different state than disabled, * refer to description of each function for setting * conditioned to ADC state. * @note After using this function, some other features must be configured * using LL unitary functions. * The minimum configuration remaining to be done is: * - Set ADC group regular or group injected sequencer: * map channel on the selected sequencer rank. * Refer to function @ref LL_ADC_REG_SetSequencerRanks(). * - Set ADC channel sampling time * Refer to function LL_ADC_SetChannelSamplingTime(); * @param ADCx ADC instance * @param ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure * @retval An ErrorStatus enumeration value: * - SUCCESS: ADC registers are initialized * - ERROR: ADC registers are not initialized */ ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) { ErrorStatus status = SUCCESS; /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(ADCx)); assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution)); assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment)); assert_param(IS_LL_ADC_SCAN_SELECTION(ADC_InitStruct->SequencersScanMode)); /* Note: Hardware constraint (refer to description of this function): */ /* ADC instance must be disabled. */ if(LL_ADC_IsEnabled(ADCx) == 0U) { /* Configuration of ADC hierarchical scope: */ /* - ADC instance */ /* - Set ADC data resolution */ /* - Set ADC conversion data alignment */ MODIFY_REG(ADCx->CR1, ADC_CR1_RES | ADC_CR1_SCAN , ADC_InitStruct->Resolution | ADC_InitStruct->SequencersScanMode ); MODIFY_REG(ADCx->CR2, ADC_CR2_ALIGN , ADC_InitStruct->DataAlignment ); } else { /* Initialization error: ADC instance is not disabled. */ status = ERROR; } return status; } /** * @brief Set each @ref LL_ADC_InitTypeDef field to default value. * @param ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure * whose fields will be set to default values. * @retval None */ void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct) { /* Set ADC_InitStruct fields to default values */ /* Set fields of ADC instance */ ADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; /* Enable scan mode to have a generic behavior with ADC of other */ /* STM32 families, without this setting available: */ /* ADC group regular sequencer and ADC group injected sequencer depend */ /* only of their own configuration. */ ADC_InitStruct->SequencersScanMode = LL_ADC_SEQ_SCAN_ENABLE; } /** * @brief Initialize some features of ADC group regular. * @note These parameters have an impact on ADC scope: ADC group regular. * Refer to corresponding unitary functions into * @ref ADC_LL_EF_Configuration_ADC_Group_Regular * (functions with prefix "REG"). * @note The setting of these parameters by function @ref LL_ADC_Init() * is conditioned to ADC state: * ADC instance must be disabled. * This condition is applied to all ADC features, for efficiency * and compatibility over all STM32 families. However, the different * features can be set under different ADC state conditions * (setting possible with ADC enabled without conversion on going, * ADC enabled with conversion on going, ...) * Each feature can be updated afterwards with a unitary function * and potentially with ADC in a different state than disabled, * refer to description of each function for setting * conditioned to ADC state. * @note After using this function, other features must be configured * using LL unitary functions. * The minimum configuration remaining to be done is: * - Set ADC group regular or group injected sequencer: * map channel on the selected sequencer rank. * Refer to function @ref LL_ADC_REG_SetSequencerRanks(). * - Set ADC channel sampling time * Refer to function LL_ADC_SetChannelSamplingTime(); * @param ADCx ADC instance * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure * @retval An ErrorStatus enumeration value: * - SUCCESS: ADC registers are initialized * - ERROR: ADC registers are not initialized */ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) { ErrorStatus status = SUCCESS; /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(ADCx)); assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource)); assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) { assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont)); } assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode)); assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer)); /* Note: Hardware constraint (refer to description of this function): */ /* ADC instance must be disabled. */ if(LL_ADC_IsEnabled(ADCx) == 0U) { /* Configuration of ADC hierarchical scope: */ /* - ADC group regular */ /* - Set ADC group regular trigger source */ /* - Set ADC group regular sequencer length */ /* - Set ADC group regular sequencer discontinuous mode */ /* - Set ADC group regular continuous mode */ /* - Set ADC group regular conversion data transfer: no transfer or */ /* transfer by DMA, and DMA requests mode */ /* Note: On this STM32 serie, ADC trigger edge is set when starting */ /* ADC conversion. */ /* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */ if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) { MODIFY_REG(ADCx->CR1, ADC_CR1_DISCEN | ADC_CR1_DISCNUM , ADC_REG_InitStruct->SequencerLength | ADC_REG_InitStruct->SequencerDiscont ); } else { MODIFY_REG(ADCx->CR1, ADC_CR1_DISCEN | ADC_CR1_DISCNUM , ADC_REG_InitStruct->SequencerLength | LL_ADC_REG_SEQ_DISCONT_DISABLE ); } MODIFY_REG(ADCx->CR2, ADC_CR2_EXTSEL | ADC_CR2_EXTEN | ADC_CR2_CONT | ADC_CR2_DMA | ADC_CR2_DDS , (ADC_REG_InitStruct->TriggerSource & ADC_CR2_EXTSEL) | ADC_REG_InitStruct->ContinuousMode | ADC_REG_InitStruct->DMATransfer ); /* Set ADC group regular sequencer length and scan direction */ /* Note: Hardware constraint (refer to description of this function): */ /* Note: If ADC instance feature scan mode is disabled */ /* (refer to ADC instance initialization structure */ /* parameter @ref SequencersScanMode */ /* or function @ref LL_ADC_SetSequencersScanMode() ), */ /* this parameter is discarded. */ LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength); } else { /* Initialization error: ADC instance is not disabled. */ status = ERROR; } return status; } /** * @brief Set each @ref LL_ADC_REG_InitTypeDef field to default value. * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure * whose fields will be set to default values. * @retval None */ void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) { /* Set ADC_REG_InitStruct fields to default values */ /* Set fields of ADC group regular */ /* Note: On this STM32 serie, ADC trigger edge is set when starting */ /* ADC conversion. */ /* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */ ADC_REG_InitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; ADC_REG_InitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE; ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE; ADC_REG_InitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE; ADC_REG_InitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE; } /** * @brief Initialize some features of ADC group injected. * @note These parameters have an impact on ADC scope: ADC group injected. * Refer to corresponding unitary functions into * @ref ADC_LL_EF_Configuration_ADC_Group_Regular * (functions with prefix "INJ"). * @note The setting of these parameters by function @ref LL_ADC_Init() * is conditioned to ADC state: * ADC instance must be disabled. * This condition is applied to all ADC features, for efficiency * and compatibility over all STM32 families. However, the different * features can be set under different ADC state conditions * (setting possible with ADC enabled without conversion on going, * ADC enabled with conversion on going, ...) * Each feature can be updated afterwards with a unitary function * and potentially with ADC in a different state than disabled, * refer to description of each function for setting * conditioned to ADC state. * @note After using this function, other features must be configured * using LL unitary functions. * The minimum configuration remaining to be done is: * - Set ADC group injected sequencer: * map channel on the selected sequencer rank. * Refer to function @ref LL_ADC_INJ_SetSequencerRanks(). * - Set ADC channel sampling time * Refer to function LL_ADC_SetChannelSamplingTime(); * @param ADCx ADC instance * @param ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure * @retval An ErrorStatus enumeration value: * - SUCCESS: ADC registers are initialized * - ERROR: ADC registers are not initialized */ ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct) { ErrorStatus status = SUCCESS; /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(ADCx)); assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADC_INJ_InitStruct->TriggerSource)); assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(ADC_INJ_InitStruct->SequencerLength)); if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE) { assert_param(IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(ADC_INJ_InitStruct->SequencerDiscont)); } assert_param(IS_LL_ADC_INJ_TRIG_AUTO(ADC_INJ_InitStruct->TrigAuto)); /* Note: Hardware constraint (refer to description of this function): */ /* ADC instance must be disabled. */ if(LL_ADC_IsEnabled(ADCx) == 0U) { /* Configuration of ADC hierarchical scope: */ /* - ADC group injected */ /* - Set ADC group injected trigger source */ /* - Set ADC group injected sequencer length */ /* - Set ADC group injected sequencer discontinuous mode */ /* - Set ADC group injected conversion trigger: independent or */ /* from ADC group regular */ /* Note: On this STM32 serie, ADC trigger edge is set when starting */ /* ADC conversion. */ /* Refer to function @ref LL_ADC_INJ_StartConversionExtTrig(). */ if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) { MODIFY_REG(ADCx->CR1, ADC_CR1_JDISCEN | ADC_CR1_JAUTO , ADC_INJ_InitStruct->SequencerDiscont | ADC_INJ_InitStruct->TrigAuto ); } else { MODIFY_REG(ADCx->CR1, ADC_CR1_JDISCEN | ADC_CR1_JAUTO , LL_ADC_REG_SEQ_DISCONT_DISABLE | ADC_INJ_InitStruct->TrigAuto ); } MODIFY_REG(ADCx->CR2, ADC_CR2_JEXTSEL | ADC_CR2_JEXTEN , (ADC_INJ_InitStruct->TriggerSource & ADC_CR2_JEXTSEL) ); /* Note: Hardware constraint (refer to description of this function): */ /* Note: If ADC instance feature scan mode is disabled */ /* (refer to ADC instance initialization structure */ /* parameter @ref SequencersScanMode */ /* or function @ref LL_ADC_SetSequencersScanMode() ), */ /* this parameter is discarded. */ LL_ADC_INJ_SetSequencerLength(ADCx, ADC_INJ_InitStruct->SequencerLength); } else { /* Initialization error: ADC instance is not disabled. */ status = ERROR; } return status; } /** * @brief Set each @ref LL_ADC_INJ_InitTypeDef field to default value. * @param ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure * whose fields will be set to default values. * @retval None */ void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct) { /* Set ADC_INJ_InitStruct fields to default values */ /* Set fields of ADC group injected */ ADC_INJ_InitStruct->TriggerSource = LL_ADC_INJ_TRIG_SOFTWARE; ADC_INJ_InitStruct->SequencerLength = LL_ADC_INJ_SEQ_SCAN_DISABLE; ADC_INJ_InitStruct->SequencerDiscont = LL_ADC_INJ_SEQ_DISCONT_DISABLE; ADC_INJ_InitStruct->TrigAuto = LL_ADC_INJ_TRIG_INDEPENDENT; } /** * @} */ /** * @} */ /** * @} */ #endif /* ADC1 || ADC2 || ADC3 */ /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/