Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 586:bb5ce239741f
Motion control: Jump back to primary view if focus is lost:
The modes sector and scroll are tipically used to have a short look at other information pages (e.g. compass). By automatically jumping back to the primary view, there is no longer the need to select the preferred view when leaving focus mode
author | Ideenmodellierer |
---|---|
date | Sun, 13 Dec 2020 18:31:40 +0100 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit