Mercurial > public > ostc4
view Discovery/Src/tMenuEditHardware.c @ 830:b7d93ff6b3b2 Evo_2_23
Added selection if an active gas shall be used for deco calculation or not:
In previous version selecting a gas as deco gas automatically activated the gas for deco calculation. Some divers prever to have the deco time displayed which matches to the gas currently in use. These divers kept the gas deactivated unless they switch to it. Features like gas usability visualization or easy gas change using quick selection were not usable for these divers. With introduction of the new option the gas switching / visualization features may be used without having the gas been considered for calculation in the background. The option may be operated in the gas selection menu.
author | Ideenmodellierer |
---|---|
date | Thu, 16 Nov 2023 20:32:09 +0100 |
parents | ffb1036c27c2 |
children | c3dd461ca3f9 |
line wrap: on
line source
/////////////////////////////////////////////////////////////////////////////// /// -*- coding: UTF-8 -*- /// /// \file Discovery/Src/tMenuEditHardware.c /// \brief BUTTONS /// \author heinrichs weikamp gmbh /// \date 15-Sept-2016 /// /// \details /// /// $Id$ /////////////////////////////////////////////////////////////////////////////// /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh /// /// This program is free software: you can redistribute it and/or modify /// it under the terms of the GNU General Public License as published by /// the Free Software Foundation, either version 3 of the License, or /// (at your option) any later version. /// /// This program is distributed in the hope that it will be useful, /// but WITHOUT ANY WARRANTY; without even the implied warranty of /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the /// GNU General Public License for more details. /// /// You should have received a copy of the GNU General Public License /// along with this program. If not, see <http://www.gnu.org/licenses/>. ////////////////////////////////////////////////////////////////////////////// /* Includes ------------------------------------------------------------------*/ #include "tMenuEditHardware.h" #include "tMenuEdit.h" #include "externCPU2bootloader.h" #include "gfx_fonts.h" #include "ostc.h" #include "tCCR.h" #include "tMenuEdit.h" #include "tHome.h" #include "tInfo.h" #include "tInfoLog.h" #include "tInfoSensor.h" #include "tComm.h" #include "data_exchange_main.h" extern void tM_build_pages(void); /* Private function prototypes -----------------------------------------------*/ void openEdit_Bluetooth(void); void openEdit_Compass(void); void openEdit_O2Sensors(void); void openEdit_Brightness(void); //void openEdit_Luftintegration(void); void openEdit_ButtonSens(void); void openEdit_FlipDisplay(void); /* Announced function prototypes -----------------------------------------------*/ uint8_t OnAction_Compass (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_Bearing (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_BearingClear (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_InertiaLevel (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); //uint8_t OnAction_ExitHardw (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_Sensor1 (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_Sensor2 (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_Sensor3 (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_O2_Calibrate (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); //uint8_t OnAction_O2_Source (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_Sensor_Info (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_Sensor_Detect (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_Button (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_ButtonBalance (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); uint8_t OnAction_ButtonLock (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); // not required uint8_t OnAction_Bluetooth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); /* Exported functions --------------------------------------------------------*/ #define O2_CALIB_FRACTION_AIR (0.209F) #define O2_CALIB_FRACTION_O2 (0.98F) static uint8_t O2_calib_gas = 21; void openEdit_Hardware(uint8_t line) { set_globalState_Menu_Line(line); switch(line) { case 1: default: openEdit_Bluetooth(); break; case 2: resetMenuEdit(CLUT_MenuPageHardware); openEdit_Compass(); break; case 3: openEdit_O2Sensors(); break; case 4: openEdit_Brightness(); break; case 5: resetMenuEdit(CLUT_MenuPageHardware); openEdit_ButtonSens(); break; case 6: openEdit_FlipDisplay(); break; } } /* Private functions ---------------------------------------------------------*/ void openEdit_Bluetooth(void) { /* does not work like this resetEnterPressedToStateBeforeButtonAction(); */ SSettings *pSettings = settingsGetPointer(); if(pSettings->bluetoothActive == 0) { pSettings->bluetoothActive = 1; MX_Bluetooth_PowerOn(); tComm_StartBlueModConfig(); } else { pSettings->bluetoothActive = 0; MX_Bluetooth_PowerOff(); } exitMenuEdit_to_Menu_with_Menu_Update_do_not_write_settings_for_this_only(); } void openEdit_FlipDisplay(void) { /* does not work like this resetEnterPressedToStateBeforeButtonAction(); */ SSettings *pSettings = settingsGetPointer(); if(pSettings->FlipDisplay == 0) { pSettings->FlipDisplay = 1; } else { pSettings->FlipDisplay = 0; } /* reinit all views */ tHome_init(); tI_init(); tM_init(); tMenuEdit_init(); tInfoLog_init(); tM_build_pages(); GFX_build_logo_frame(); GFX_build_hw_background_frame(); exitEditWithUpdate(); exitMenuEdit_to_Home(); } static uint8_t togglePlusMinus(uint8_t input) { if (input == '+') { return '-'; } else { return '+'; } } static uint8_t OnAction_CompassDeclination(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { SSettings *settings = settingsGetPointer(); uint8_t digitContentNew; switch (action) { case ACTION_BUTTON_ENTER: return digitContent; case ACTION_BUTTON_ENTER_FINAL: { int32_t compassDeclinationDeg; evaluateNewString(editId, (uint32_t *)&compassDeclinationDeg, NULL, NULL, NULL); if (compassDeclinationDeg > 99) { compassDeclinationDeg = 99; } else if (compassDeclinationDeg < -99) { compassDeclinationDeg = -99; } settings->compassDeclinationDeg = compassDeclinationDeg; tMenuEdit_newInput(editId, ((input_u)compassDeclinationDeg).uint32, 0, 0, 0); } break; case ACTION_BUTTON_NEXT: if (digitNumber == 0) { digitContentNew = togglePlusMinus(digitContent); } else { digitContentNew = digitContent + 1; if (digitContentNew > '9') { digitContentNew = '0'; } } return digitContentNew; case ACTION_BUTTON_BACK: if (digitNumber == 0) { digitContentNew = togglePlusMinus(digitContent); } else { digitContentNew = digitContent - 1; if (digitContentNew < '0') { digitContentNew = '9'; } } return digitContentNew; } return UNSPECIFIC_RETURN; } static void showCompassDeclination(SSettings *settings, bool isRefresh) { char text[16]; snprintf(text, 16, "%c%c:", TXT_2BYTE, TXT2BYTE_CompassDeclination); write_label_var(30, 800, ME_Y_LINE6, &FontT48, text); if (isRefresh) { tMenuEdit_refresh_field(StMHARD2_Compass_Declination); } else { write_field_sdigit(StMHARD2_Compass_Declination, 500, 800, ME_Y_LINE6, &FontT48, "\034###`", settings->compassDeclinationDeg, 0, 0, 0); } } void refresh_CompassEdit(void) { SSettings *settings = settingsGetPointer(); uint16_t heading; char text[32]; uint8_t textIndex = 0; text[0] = '\001'; text[1] = TXT_2BYTE; text[2] = TXT2BYTE_Compass; text[3] = 0; write_topline(text); if(settings->compassInertia) { heading = (uint16_t)compass_getCompensated(); } else { heading = (uint16_t)stateUsed->lifeData.compass_heading; } snprintf(text,32,"\001%03i`",heading); write_label_var( 0, 800, ME_Y_LINE1, &FontT54, text); tMenuEdit_refresh_field(StMHARD2_Compass_SetCourse); tMenuEdit_refresh_field(StMHARD2_Compass_Calibrate); tMenuEdit_refresh_field(StMHARD2_Compass_ResetCourse); text[textIndex++] = TXT_2BYTE; text[textIndex++] = TXT2BYTE_CompassInertia; text[textIndex++] = ':'; text[textIndex++] = ' '; text[textIndex++] = '0' + settings->compassInertia; write_label_var(30, 800, ME_Y_LINE5, &FontT48, text); showCompassDeclination(settings, true); write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); } void openEdit_Compass(void) { SSettings *settings = settingsGetPointer(); char text[10]; uint8_t textIndex = 0; text[textIndex++] = '\001'; text[textIndex++] = TXT_2BYTE; text[textIndex++] = TXT2BYTE_Compass; text[textIndex++] = 0; write_topline(text); text[0] = TXT_2BYTE; text[2] = 0; text[1] = TXT2BYTE_SetBearing; write_field_button(StMHARD2_Compass_SetCourse, 30, 800, ME_Y_LINE2, &FontT48, text); text[1] = TXT2BYTE_ResetBearing; write_field_button(StMHARD2_Compass_ResetCourse, 30, 800, ME_Y_LINE3, &FontT48, text); text[1] = TXT2BYTE_CompassCalib; write_field_button(StMHARD2_Compass_Calibrate, 30, 800, ME_Y_LINE4, &FontT48, text); text[1] = TXT2BYTE_CompassInertia; textIndex = 2; text[textIndex++] = ':'; text[textIndex++] = ' '; text[textIndex++] = '0' + settings->compassInertia; text[textIndex++] = 0; write_field_button(StMHARD2_Compass_Inertia, 30, 800, ME_Y_LINE5, &FontT48, text); showCompassDeclination(settings, false); setEvent(StMHARD2_Compass_SetCourse, (uint32_t)OnAction_Bearing); setEvent(StMHARD2_Compass_ResetCourse, (uint32_t)OnAction_BearingClear); setEvent(StMHARD2_Compass_Calibrate, (uint32_t)OnAction_Compass); setEvent(StMHARD2_Compass_Inertia, (uint32_t)OnAction_InertiaLevel); setEvent(StMHARD2_Compass_Declination, (uint32_t)OnAction_CompassDeclination); write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); } uint8_t OnAction_Compass (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { calibrateCompass(); return EXIT_TO_INFO_COMPASS; } uint8_t OnAction_Bearing (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { if((int16_t)stateUsed->lifeData.compass_heading != -1) { settingsGetPointer()->compassBearing = (int16_t)stateUsed->lifeData.compass_heading; } else { settingsGetPointer()->compassBearing = 0; } if(settingsGetPointer()->compassBearing == 0) settingsGetPointer()->compassBearing = 360; return UPDATE_AND_EXIT_TO_MENU; } uint8_t OnAction_BearingClear (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { settingsGetPointer()->compassBearing = 0; return UPDATE_AND_EXIT_TO_MENU; } uint8_t OnAction_InertiaLevel (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { uint8_t newLevel = 0; newLevel = settingsGetPointer()->compassInertia + 1; if(newLevel > MAX_COMPASS_COMP) { newLevel = 0; } settingsGetPointer()->compassInertia = newLevel; return UPDATE_DIVESETTINGS; } /* uint8_t OnAction_ExitHardw (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { return EXIT_TO_MENU; } */ void refresh_O2Sensors(void) { char strSensorId[20]; char strSensorValue[20]; uint16_t y_line; uint8_t index = 0; const SDiveState *pStateReal = stateRealGetPointer(); SSettings *pSettings = settingsGetPointer(); if(memcmp(pSettings->ext_sensor_map, pStateReal->lifeData.extIf_sensor_map, EXT_INTERFACE_SENSOR_CNT) != 0) { memcpy(pSettings->ext_sensor_map, pStateReal->lifeData.extIf_sensor_map, EXT_INTERFACE_SENSOR_CNT); pSettings->ppo2sensors_deactivated = 0x0; /* deactivation will be done by openEditO2Sensor if need */ pSettings->co2_sensor_active = 0; pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_OPTIC; for(index = 0; index < EXT_INTERFACE_SENSOR_CNT - 1; index++) { switch(pSettings->ext_sensor_map[index]) { case SENSOR_OPTIC: pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_OPTIC; break; case SENSOR_ANALOG: if(pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_DIGITAL) { pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_ANADIG; } if(pSettings->ppo2sensors_source != O2_SENSOR_SOURCE_ANADIG) { pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_ANALOG; } break; case SENSOR_DIGO2M: if(pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANALOG) { pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_ANADIG; } if(pSettings->ppo2sensors_source != O2_SENSOR_SOURCE_ANADIG) { pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_DIGITAL; } break; case SENSOR_CO2: case SENSOR_CO2M: pSettings->co2_sensor_active = 1; break; #ifdef ENABLE_SENTINEL_MODE case SENSOR_SENTINEL: pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_SENTINEL; break; #endif default: break; } } openEdit_O2Sensors(); } strSensorId[0] = '\001'; strSensorId[1] = TXT_o2Sensors; strSensorId[2] = 0; write_topline(strSensorId); strSensorId[0] = TXT_2BYTE; strSensorId[1] = TXT2BYTE_Sensor; strSensorId[2] = ' '; strSensorId[3] = TXT_2BYTE; strSensorId[4] = 'X'; strSensorId[5] = '1'; strSensorId[6] = 0; for(index = 0; index < 3; index++) { strSensorId[3] = TXT_2BYTE; strSensorId[4] = 'X'; strSensorId[5] = '1' + index; switch(pSettings->ext_sensor_map[index]) { case SENSOR_SEARCH: strSensorId[1] = TXT2BYTE_SensorDetect; strSensorId[2] = 0; strSensorId[4] = 0; break; case SENSOR_OPTIC: strSensorId[4] = TXT2BYTE_O2IFOptic; break; case SENSOR_ANALOG: strSensorId[4] = TXT2BYTE_O2IFAnalog; break; case SENSOR_DIGO2: case SENSOR_DIGO2M: strSensorId[4] = TXT2BYTE_O2IFDigital; break; case SENSOR_CO2: case SENSOR_CO2M: strSensorId[3] = 'C'; strSensorId[4] = 'O'; break; case SENSOR_SENTINEL: strSensorId[3] = 'S'; strSensorId[4] = 'e'; break; default: strSensorId[5] = 0; break; } if(strSensorId[4] != 'X') { write_label_var( 96, 340, ME_Y_LINE1 + (index * ME_Y_LINE_STEP), &FontT48, strSensorId); } strSensorValue[0] = 0; if((pSettings->ext_sensor_map[index] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[index] < SENSOR_TYPE_O2_END)) { snprintf(strSensorValue, 20,"%01.2f, %01.1f mV", pStateReal->lifeData.ppO2Sensor_bar[index], pStateReal->lifeData.sensorVoltage_mV[index]); } else if(pSettings->ext_sensor_map[index] == SENSOR_CO2M) { snprintf(strSensorValue, 20,"%ld ppm", pStateReal->lifeData.CO2_data.CO2_ppm); } y_line = ME_Y_LINE1 + (index * ME_Y_LINE_STEP); if(strSensorValue[0] != 0) { write_label_var( 480, 800, y_line, &FontT48, strSensorValue); } } if(pSettings->ext_sensor_map[0] == SENSOR_OPTIC) { strSensorId[0] = TXT_2BYTE; strSensorId[1] = TXT2BYTE_HUDbattery; strSensorId[2] = 0; write_label_var( 30, 340, ME_Y_LINE4, &FontT48, strSensorId); snprintf(strSensorId, 20,"%01.3fV", get_HUD_battery_voltage_V()); write_label_var( 480, 800, ME_Y_LINE4, &FontT48, strSensorId); } else { if((pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANALOG) || (pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANADIG) #ifdef ENABLE_SENTINEL_MODE || (pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_SENTINEL) #endif ) { strSensorId[0] = TXT_2BYTE; strSensorId[1] = TXT2BYTE_O2Calib; strSensorId[2] = 0; write_label_var( 30, 340, ME_Y_LINE4, &FontT48, strSensorId); snprintf(strSensorId, 20,"%d%%", O2_calib_gas); write_label_var( 480, 800, ME_Y_LINE4, &FontT48, strSensorId); } } if(DataEX_external_ADC_Present()) { strSensorId[0] = TXT_2BYTE; strSensorId[1] = TXT2BYTE_SensorDetect; strSensorId[2] = 0; write_label_var( 30, 340, ME_Y_LINE6, &FontT48, strSensorId); } if((pSettings->ext_sensor_map[0] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[0] < SENSOR_MUX)) { tMenuEdit_refresh_field(StMHARD3_O2_Sensor1); } if((pSettings->ext_sensor_map[1] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[1] < SENSOR_MUX)) { tMenuEdit_refresh_field(StMHARD3_O2_Sensor2); } if((pSettings->ext_sensor_map[2] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[2] < SENSOR_MUX)) { tMenuEdit_refresh_field(StMHARD3_O2_Sensor3); } if(get_globalState() == StMHARD3_O2_Calibrate) { write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_O2Calib,TXT2BYTE_ButtonPlus); } else { write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); } } void openEdit_O2Sensors(void) { SSettings *pSettings = settingsGetPointer(); uint8_t sensorActive[3]; uint8_t index = 0; char text[3]; set_globalState(StMHARD3_Sensors); resetMenuEdit(CLUT_MenuPageHardware); for(index = 0; index < 3; index++ ) { if(pSettings->ppo2sensors_deactivated & (0x01 << index)) { sensorActive[index] = 0; } else { sensorActive[index] = 1; } } if(((pSettings->ext_sensor_map[0] < SENSOR_OPTIC) || (pSettings->ext_sensor_map[0] >= SENSOR_MUX))) { pSettings->ppo2sensors_deactivated |= 1; } else { write_field_on_off(StMHARD3_O2_Sensor1, 30, 95, ME_Y_LINE1, &FontT48, "", sensorActive[0]); } if(((pSettings->ext_sensor_map[1] < SENSOR_OPTIC) || (pSettings->ext_sensor_map[1] >= SENSOR_MUX))) { pSettings->ppo2sensors_deactivated |= 2; } else { write_field_on_off(StMHARD3_O2_Sensor2, 30, 95, ME_Y_LINE2, &FontT48, "", sensorActive[1]); } if(((pSettings->ext_sensor_map[2] < SENSOR_OPTIC) || (pSettings->ext_sensor_map[2] >= SENSOR_MUX))) { pSettings->ppo2sensors_deactivated |= 4; } else { write_field_on_off(StMHARD3_O2_Sensor3, 30, 95, ME_Y_LINE3, &FontT48, "", sensorActive[2]); } stateRealGetPointerWrite()->diveSettings.ppo2sensors_deactivated = pSettings->ppo2sensors_deactivated; if(settingsGetPointer()->ppo2sensors_deactivated & 1) sensorActive[0] = 0; if(settingsGetPointer()->ppo2sensors_deactivated & 2) sensorActive[1] = 0; if(settingsGetPointer()->ppo2sensors_deactivated & 4) sensorActive[2] = 0; if((pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANALOG) || (pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANADIG) #ifdef ENABLE_SENTINEL_MODE || (settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_SENTINEL) #endif ) { write_label_fix( 30, 800, ME_Y_LINE4, &FontT48, TXT2BYTE_O2Calib); write_label_var( 400, 800, ME_Y_LINE4, &FontT48, "\016\016 %\017"); write_field_toggle(StMHARD3_O2_Calibrate, 400, 800, ME_Y_LINE4, &FontT48, "", 21, 98); } if(DataEX_external_ADC_Present()) { text[0] = TXT_2BYTE; text[1] = TXT2BYTE_SensorDetect; text[2] = 0; write_label_var( 30, 340, ME_Y_LINE6, &FontT48, text); write_field_button(StMHARD3_Sensor_Detect, 30, 800, ME_Y_LINE6, &FontT48, text); } if((pSettings->ext_sensor_map[0] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[0] < SENSOR_MUX)) { setEvent(StMHARD3_O2_Sensor1, (uint32_t)OnAction_Sensor1); } if((pSettings->ext_sensor_map[1] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[1] < SENSOR_MUX)) { setEvent(StMHARD3_O2_Sensor2, (uint32_t)OnAction_Sensor2); } if((pSettings->ext_sensor_map[2] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[2] < SENSOR_MUX)) { setEvent(StMHARD3_O2_Sensor3, (uint32_t)OnAction_Sensor3); } if((settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_ANALOG) || (settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_ANADIG) #ifdef ENABLE_SENTINEL_MODE || (settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_SENTINEL) #endif ) { setEvent(StMHARD3_O2_Calibrate, (uint32_t)OnAction_O2_Calibrate); } if(DataEX_external_ADC_Present()) { setEvent(StMHARD3_Sensor_Detect, (uint32_t)OnAction_Sensor_Detect); } write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); } uint8_t OnAction_Sensor1(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { const SDiveState *pStateReal = stateRealGetPointer(); if((pStateReal->lifeData.extIf_sensor_map[0] == SENSOR_DIGO2M) || (pStateReal->lifeData.extIf_sensor_map[0] == SENSOR_CO2M)) { return EXIT_TO_INFO_SENSOR; } else { if(settingsGetPointer()->ppo2sensors_deactivated & 1) { settingsGetPointer()->ppo2sensors_deactivated &= 4+2; tMenuEdit_set_on_off(editId, 1); } else { settingsGetPointer()->ppo2sensors_deactivated |= 1; tMenuEdit_set_on_off(editId, 0); } } return UPDATE_DIVESETTINGS; } uint8_t OnAction_Sensor2(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { const SDiveState *pStateReal = stateRealGetPointer(); if((pStateReal->lifeData.extIf_sensor_map[1] == SENSOR_DIGO2M) || (pStateReal->lifeData.extIf_sensor_map[1] == SENSOR_CO2M)) { return EXIT_TO_INFO_SENSOR; } else { if(settingsGetPointer()->ppo2sensors_deactivated & 2) { settingsGetPointer()->ppo2sensors_deactivated &= 4+1; tMenuEdit_set_on_off(editId, 1); } else { settingsGetPointer()->ppo2sensors_deactivated |= 2; tMenuEdit_set_on_off(editId, 0); } } return UPDATE_DIVESETTINGS; } uint8_t OnAction_Sensor3(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { const SDiveState *pStateReal = stateRealGetPointer(); if((pStateReal->lifeData.extIf_sensor_map[2] == SENSOR_DIGO2M) || (pStateReal->lifeData.extIf_sensor_map[2] == SENSOR_CO2M)) { return EXIT_TO_INFO_SENSOR; } else { if(settingsGetPointer()->ppo2sensors_deactivated & 4) { settingsGetPointer()->ppo2sensors_deactivated &= 2+1; tMenuEdit_set_on_off(editId, 1); } else { settingsGetPointer()->ppo2sensors_deactivated |= 4; tMenuEdit_set_on_off(editId, 0); } } return UPDATE_DIVESETTINGS; } uint8_t OnAction_O2_Calibrate (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { uint8_t loop; const SDiveState *pStateReal = stateRealGetPointer(); SSettings* pSettings = settingsGetPointer(); uint8_t retVal = UNSPECIFIC_RETURN; float compensatedRef; if(action == ACTION_BUTTON_ENTER_FINAL) { if(O2_calib_gas == 21) { compensatedRef = O2_CALIB_FRACTION_AIR * pStateReal->lifeData.pressure_ambient_bar / 1.0; } else { compensatedRef = O2_CALIB_FRACTION_O2 * pStateReal->lifeData.pressure_ambient_bar / 1.0; } for(loop=0;loop<3;loop++) { if((pSettings->ppo2sensors_deactivated & (0x1 << loop)) == 0) { if(pStateReal->lifeData.sensorVoltage_mV[loop] > 0.0001) /* sensor connected ?*/ { #ifdef ENABLE_EXTERNAL_PRESSURE if(loop == 2) { compensatedRef = pStateReal->lifeData.pressure_ambient_bar; } #endif pSettings->ppo2sensors_calibCoeff[loop] = compensatedRef / pStateReal->lifeData.sensorVoltage_mV[loop]; } else { pSettings->ppo2sensors_calibCoeff[loop] = 0.0; settingsGetPointer()->ppo2sensors_deactivated |= 0x1 << loop; } } } tMenuEdit_newInput(editId, O2_calib_gas, 0, 0, 0); retVal = UPDATE_DIVESETTINGS; } if(action == ACTION_BUTTON_NEXT) { if(O2_calib_gas == 21) { O2_calib_gas = 98; } else { O2_calib_gas = 21; } } retVal = O2_calib_gas; if(action == ACTION_BUTTON_BACK) { exitMenuEditField(); } return retVal; } uint8_t OnAction_Sensor_Info(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { return EXIT_TO_INFO_SENSOR; } uint8_t OnAction_Sensor_Detect(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { DataEX_setExtInterface_Cmd(EXT_INTERFACE_AUTODETECT); return UNSPECIFIC_RETURN; } void openEdit_Brightness(void) { uint8_t actualBrightness; SSettings *pSettings = settingsGetPointer(); actualBrightness = pSettings->brightness; actualBrightness++; if(actualBrightness > 4) actualBrightness = 0; pSettings->brightness = actualBrightness; exitEditWithUpdate(); } void buttonBalanceText_helper(uint8_t idOfButton, char *textOutput) { uint8_t txtcount = 0; if(idOfButton < 3) { textOutput[txtcount++] = '@' + settingsGetPointer()->buttonBalance[idOfButton]; textOutput[txtcount++] = ' '; textOutput[txtcount++] = ' '; textOutput[txtcount++] = '('; switch(settingsGetPointer()->buttonBalance[idOfButton]) { case 1: textOutput[txtcount++] = '-'; textOutput[txtcount++] = '2'; textOutput[txtcount++] = '0'; break; case 2: textOutput[txtcount++] = '-'; textOutput[txtcount++] = '1'; textOutput[txtcount++] = '0'; break; case 3: default: textOutput[txtcount++] = '0'; break; case 4: textOutput[txtcount++] = '+'; textOutput[txtcount++] = '1'; textOutput[txtcount++] = '0'; break; case 5: textOutput[txtcount++] = '+'; textOutput[txtcount++] = '2'; textOutput[txtcount++] = '0'; break; } textOutput[txtcount++] = ')'; } textOutput[txtcount++] = 0; } /**# ****************************************************************************** * @brief BUTTONS * @author heinrichs weikamp gmbh * @version V 01 * @date 15-Sept-2016 ****************************************************************************** * Button 0 is right, Button 1 is middle, Button 2 is left !!!! * 2 1 0 (base value 3) * Button 3 is used to store the base value, all others are balanced around this one! * */ void openEdit_ButtonSens(void) { char text[32]; uint8_t sens; const uint32_t eventListButtonBalance[3] = {StMHARD5_ButtonBalance1,StMHARD5_ButtonBalance2,StMHARD5_ButtonBalance3}; sens = (uint8_t)settingsGetPointer()->ButtonResponsiveness[3]; write_field_3digit(StMHARD5_Button1, 360, 780, ME_Y_LINE1, &FontT48, "###", sens, 0, 0, 0); for(int i=2;i>=0;i--) { buttonBalanceText_helper(i,text); write_field_button(eventListButtonBalance[i],360,500,ME_Y_LINE4-(i*ME_Y_LINE_STEP),&FontT48,text); } snprintf(text,32,"%c",TXT_ButtonLock); write_field_on_off(StMHARD5_ButtonLock, 30, 95, ME_Y_LINE5, &FontT48, text, settingsGetPointer()->buttonLockActive); setEvent(StMHARD5_Button1, (uint32_t)OnAction_Button); for(int i=2;i>=0;i--) { setEvent(eventListButtonBalance[i], (uint32_t)OnAction_ButtonBalance); } setEvent(StMHARD5_ButtonLock, (uint32_t)OnAction_ButtonLock); write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); } void refresh_ButtonValuesFromPIC(void) { uint8_t sens[3]; char text[64]; text[0] = '\001'; text[1] = TXT_2BYTE; text[2] = TXT2BYTE_ButtonSensitivity; text[3] = 0; write_topline(text); write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); for(int i=0;i<3;i++) { text[0] = TXT_2BYTE; text[1] = TXT2BYTE_ButtonLeft+i; text[2] = 0; write_label_var( 20, 300, ME_Y_LINE2+(i*ME_Y_LINE_STEP), &FontT48, text); } for(int i=0;i<3;i++) { sens[i] = settingsHelperButtonSens_translate_hwOS_values_to_percentage(stateRealGetPointer()->lifeData.buttonPICdata[i]); } snprintf(text,64,"\020\016\016%c%c \017 (%03u %03u %03u)",TXT_2BYTE,TXT2BYTE_LowerIsLess,sens[2],sens[1],sens[0]); write_label_var( 20, 340, ME_Y_LINE6, &FontT42, text); tMenuEdit_refresh_field(StMHARD5_Button1); tMenuEdit_refresh_field(StMHARD5_ButtonBalance1); tMenuEdit_refresh_field(StMHARD5_ButtonBalance2); tMenuEdit_refresh_field(StMHARD5_ButtonBalance3); tMenuEdit_refresh_field(StMHARD5_ButtonLock); } uint8_t OnAction_Button(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { uint8_t digitContentNew, remainder; uint32_t newSensitivityGlobal; if(action == ACTION_BUTTON_NEXT) { digitContentNew = digitContent - '0'; if(digitContentNew >= MAX_BUTTONRESPONSIVENESS_GUI) { digitContentNew = MIN_BUTTONRESPONSIVENESS_GUI; } else { remainder = digitContentNew%5; digitContentNew += 5 - remainder; if(digitContentNew >= MAX_BUTTONRESPONSIVENESS_GUI) digitContentNew = MAX_BUTTONRESPONSIVENESS_GUI; } return '0' + digitContentNew; } if(action == ACTION_BUTTON_BACK) { digitContentNew = digitContent - '0'; if(digitContentNew <= MIN_BUTTONRESPONSIVENESS_GUI) digitContentNew = MAX_BUTTONRESPONSIVENESS_GUI; else { remainder = digitContentNew%5; if(remainder) digitContentNew -= remainder; else digitContentNew -= 5; } return '0' + digitContentNew; } if(action == ACTION_BUTTON_ENTER_FINAL) { evaluateNewString(editId, &newSensitivityGlobal, 0, 0, 0); settingsHelperButtonSens_keepPercentageValues(newSensitivityGlobal, settingsGetPointer()->ButtonResponsiveness); setButtonResponsiveness(settingsGetPointer()->ButtonResponsiveness); return UNSPECIFIC_RETURN; } return digitContent; } uint8_t OnAction_ButtonBalance(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { int8_t idBalance = -1; uint8_t *ptrSetting; char text[32]; const uint32_t eventListButtonBalance[3] = {StMHARD5_ButtonBalance1,StMHARD5_ButtonBalance2,StMHARD5_ButtonBalance3}; idBalance = -1; for(int i=0;i<3;i++) { if(editId == eventListButtonBalance[i]) { idBalance = i; break; } } if((idBalance >= 0) && (idBalance < 3)) { ptrSetting = &settingsGetPointer()->buttonBalance[idBalance]; *ptrSetting += 1; if(*ptrSetting > 5) *ptrSetting = 2; buttonBalanceText_helper(idBalance,text); tMenuEdit_newButtonText(eventListButtonBalance[idBalance],text); } return UNSPECIFIC_RETURN; } uint8_t OnAction_ButtonLock(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) { SSettings *pSettings = settingsGetPointer(); if(pSettings->buttonLockActive) { pSettings->buttonLockActive = 0; tMenuEdit_set_on_off(editId, 0); } else { pSettings->buttonLockActive = 1; tMenuEdit_set_on_off(editId, 1); } return UNSPECIFIC_RETURN; }