Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c @ 210:b2a9e9b02df0 cv-persistent
New feature: make selected customviews persistent
Add the set of selected customviews during dive time to the
persistent settings. Nothing has changed to the menu, so a user
still has to access the on/off page from the simulator or during
an actual dive, but once changed here, the settings are preserved
for later dives. It feels a bit as waste of menu space to add a second
page for something that is already available. And further, I have to
admit the adding a page is rather complex to get the navigation right,
so that is a 2nd argument not to add a page.
Further, getting this one setting saved to the persist
preferences is a bit of a hack. Misused an existing global bool
value (WriteSettings) to force a actual write despite not being
in surface mode.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
| author | Jan Mulder <jlmulder@xs4all.nl> |
|---|---|
| date | Tue, 26 Mar 2019 13:00:15 +0100 |
| parents | c78bcbd5deda |
| children | f72613a152dd |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_uart.c * @author MCD Application Team * @brief UART HAL module driver. * This file provides firmware functions to manage the following * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral: * + Initialization and de-initialization functions * + IO operation functions * + Peripheral Control functions * + Peripheral State and Errors functions * @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] The UART HAL driver can be used as follows: (#) Declare a UART_HandleTypeDef handle structure. (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: (##) Enable the USARTx interface clock. (##) UART pins configuration: (+++) Enable the clock for the UART GPIOs. (+++) Configure these UART pins as alternate function pull-up. (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() and HAL_UART_Receive_IT() APIs): (+++) Configure the USARTx interrupt priority. (+++) Enable the NVIC USART IRQ handle. (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() and HAL_UART_Receive_DMA() APIs): (+++) Declare a DMA handle structure for the Tx/Rx stream. (+++) Enable the DMAx interface clock. (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. (+++) Configure the DMA Tx/Rx Stream. (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream. (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware flow control and Mode(Receiver/Transmitter) in the Init structure. (#) For the UART asynchronous mode, initialize the UART registers by calling the HAL_UART_Init() API. (#) For the UART Half duplex mode, initialize the UART registers by calling the HAL_HalfDuplex_Init() API. (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API. (#) For the Multi-Processor mode, initialize the UART registers by calling the HAL_MultiProcessor_Init() API. [..] (@) The specific UART interrupts (Transmission complete interrupt, RXNE interrupt and Error Interrupts) will be managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit and receive process. [..] (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customized HAL_UART_MspInit() API. [..] Three operation modes are available within this driver : *** Polling mode IO operation *** ================================= [..] (+) Send an amount of data in blocking mode using HAL_UART_Transmit() (+) Receive an amount of data in blocking mode using HAL_UART_Receive() *** Interrupt mode IO operation *** =================================== [..] (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT() (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can add his own code by customization of function pointer HAL_UART_TxCpltCallback (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT() (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can add his own code by customization of function pointer HAL_UART_RxCpltCallback (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can add his own code by customization of function pointer HAL_UART_ErrorCallback *** DMA mode IO operation *** ============================== [..] (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA() (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can add his own code by customization of function pointer HAL_UART_TxCpltCallback (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA() (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can add his own code by customization of function pointer HAL_UART_RxCpltCallback (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can add his own code by customization of function pointer HAL_UART_ErrorCallback (+) Pause the DMA Transfer using HAL_UART_DMAPause() (+) Resume the DMA Transfer using HAL_UART_DMAResume() (+) Stop the DMA Transfer using HAL_UART_DMAStop() *** UART HAL driver macros list *** ============================================= [..] Below the list of most used macros in UART HAL driver. (+) __HAL_UART_ENABLE: Enable the UART peripheral (+) __HAL_UART_DISABLE: Disable the UART peripheral (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not [..] (@) You can refer to the UART HAL driver header file for more useful macros @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @defgroup UART UART * @brief HAL UART module driver * @{ */ #ifdef HAL_UART_MODULE_ENABLED /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /** @addtogroup UART_Private_Constants * @{ */ /** * @} */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /** @addtogroup UART_Private_Functions UART Private Functions * @{ */ static void UART_EndTxTransfer(UART_HandleTypeDef *huart); static void UART_EndRxTransfer(UART_HandleTypeDef *huart); static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); static void UART_DMAError(DMA_HandleTypeDef *hdma); static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart); static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart); static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart); static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); static void UART_SetConfig (UART_HandleTypeDef *huart); /** * @} */ /* Exported functions ---------------------------------------------------------*/ /** @defgroup UART_Exported_Functions UART Exported Functions * @{ */ /** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions * @brief Initialization and Configuration functions * @verbatim =============================================================================== ##### Initialization and Configuration functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to initialize the USARTx or the UARTy in asynchronous mode. (+) For the asynchronous mode only these parameters can be configured: (++) Baud Rate (++) Word Length (++) Stop Bit (++) Parity: If the parity is enabled, then the MSB bit of the data written in the data register is transmitted but is changed by the parity bit. Depending on the frame length defined by the M bit (8-bits or 9-bits), please refer to Reference manual for possible UART frame formats. (++) Hardware flow control (++) Receiver/transmitter modes (++) Over Sampling Method [..] The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor configuration procedures (details for the procedures are available in reference manual (RM0329)). @endverbatim * @{ */ /** * @brief Initializes the UART mode according to the specified parameters in * the UART_InitTypeDef and create the associated handle. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) { /* Check the UART handle allocation */ if(huart == NULL) { return HAL_ERROR; } /* Check the parameters */ if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) { /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */ assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); } else { assert_param(IS_UART_INSTANCE(huart->Instance)); } assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); if(huart->gState == HAL_UART_STATE_RESET) { /* Allocate lock resource and initialize it */ huart->Lock = HAL_UNLOCKED; /* Init the low level hardware */ HAL_UART_MspInit(huart); } huart->gState = HAL_UART_STATE_BUSY; /* Disable the peripheral */ __HAL_UART_DISABLE(huart); /* Set the UART Communication parameters */ UART_SetConfig(huart); /* In asynchronous mode, the following bits must be kept cleared: - LINEN and CLKEN bits in the USART_CR2 register, - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); /* Enable the peripheral */ __HAL_UART_ENABLE(huart); /* Initialize the UART state */ huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState= HAL_UART_STATE_READY; huart->RxState= HAL_UART_STATE_READY; return HAL_OK; } /** * @brief Initializes the half-duplex mode according to the specified * parameters in the UART_InitTypeDef and create the associated handle. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) { /* Check the UART handle allocation */ if(huart == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_UART_INSTANCE(huart->Instance)); assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); if(huart->gState == HAL_UART_STATE_RESET) { /* Allocate lock resource and initialize it */ huart->Lock = HAL_UNLOCKED; /* Init the low level hardware */ HAL_UART_MspInit(huart); } huart->gState = HAL_UART_STATE_BUSY; /* Disable the peripheral */ __HAL_UART_DISABLE(huart); /* Set the UART Communication parameters */ UART_SetConfig(huart); /* In half-duplex mode, the following bits must be kept cleared: - LINEN and CLKEN bits in the USART_CR2 register, - SCEN and IREN bits in the USART_CR3 register.*/ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); /* Enable the peripheral */ __HAL_UART_ENABLE(huart); /* Initialize the UART state*/ huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState= HAL_UART_STATE_READY; huart->RxState= HAL_UART_STATE_READY; return HAL_OK; } /** * @brief Initializes the LIN mode according to the specified * parameters in the UART_InitTypeDef and create the associated handle. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param BreakDetectLength Specifies the LIN break detection length. * This parameter can be one of the following values: * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection * @retval HAL status */ HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) { /* Check the UART handle allocation */ if(huart == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_UART_INSTANCE(huart->Instance)); assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength)); assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling)); if(huart->gState == HAL_UART_STATE_RESET) { /* Allocate lock resource and initialize it */ huart->Lock = HAL_UNLOCKED; /* Init the low level hardware */ HAL_UART_MspInit(huart); } huart->gState = HAL_UART_STATE_BUSY; /* Disable the peripheral */ __HAL_UART_DISABLE(huart); /* Set the UART Communication parameters */ UART_SetConfig(huart); /* In LIN mode, the following bits must be kept cleared: - LINEN and CLKEN bits in the USART_CR2 register, - SCEN and IREN bits in the USART_CR3 register.*/ CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); /* Set the USART LIN Break detection length. */ CLEAR_BIT(huart->Instance->CR2, USART_CR2_LBDL); SET_BIT(huart->Instance->CR2, BreakDetectLength); /* Enable the peripheral */ __HAL_UART_ENABLE(huart); /* Initialize the UART state*/ huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState= HAL_UART_STATE_READY; huart->RxState= HAL_UART_STATE_READY; return HAL_OK; } /** * @brief Initializes the Multi-Processor mode according to the specified * parameters in the UART_InitTypeDef and create the associated handle. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param Address USART address * @param WakeUpMethod specifies the USART wake-up method. * This parameter can be one of the following values: * @arg UART_WAKEUPMETHOD_IDLELINE: Wake-up by an idle line detection * @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wake-up by an address mark * @retval HAL status */ HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) { /* Check the UART handle allocation */ if(huart == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_UART_INSTANCE(huart->Instance)); assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); assert_param(IS_UART_ADDRESS(Address)); assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); if(huart->gState == HAL_UART_STATE_RESET) { /* Allocate lock resource and initialize it */ huart->Lock = HAL_UNLOCKED; /* Init the low level hardware */ HAL_UART_MspInit(huart); } huart->gState = HAL_UART_STATE_BUSY; /* Disable the peripheral */ __HAL_UART_DISABLE(huart); /* Set the UART Communication parameters */ UART_SetConfig(huart); /* In Multi-Processor mode, the following bits must be kept cleared: - LINEN and CLKEN bits in the USART_CR2 register, - SCEN, HDSEL and IREN bits in the USART_CR3 register */ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); /* Clear the USART address */ CLEAR_BIT(huart->Instance->CR2, USART_CR2_ADD); /* Set the USART address node */ SET_BIT(huart->Instance->CR2, Address); /* Set the wake up method by setting the WAKE bit in the CR1 register */ CLEAR_BIT(huart->Instance->CR1, USART_CR1_WAKE); SET_BIT(huart->Instance->CR1, WakeUpMethod); /* Enable the peripheral */ __HAL_UART_ENABLE(huart); /* Initialize the UART state */ huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState= HAL_UART_STATE_READY; huart->RxState= HAL_UART_STATE_READY; return HAL_OK; } /** * @brief DeInitializes the UART peripheral. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) { /* Check the UART handle allocation */ if(huart == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_UART_INSTANCE(huart->Instance)); huart->gState = HAL_UART_STATE_BUSY; /* DeInit the low level hardware */ HAL_UART_MspDeInit(huart); huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState = HAL_UART_STATE_RESET; huart->RxState = HAL_UART_STATE_RESET; /* Process Lock */ __HAL_UNLOCK(huart); return HAL_OK; } /** * @brief UART MSP Init. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval None */ __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE: This function Should not be modified, when the callback is needed, the HAL_UART_MspInit could be implemented in the user file */ } /** * @brief UART MSP DeInit. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval None */ __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE: This function Should not be modified, when the callback is needed, the HAL_UART_MspDeInit could be implemented in the user file */ } /** * @} */ /** @defgroup UART_Exported_Functions_Group2 IO operation functions * @brief UART Transmit and Receive functions * @verbatim ============================================================================== ##### IO operation functions ##### ============================================================================== [..] This subsection provides a set of functions allowing to manage the UART asynchronous and Half duplex data transfers. (#) There are two modes of transfer: (++) Blocking mode: The communication is performed in polling mode. The HAL status of all data processing is returned by the same function after finishing transfer. (++) Non blocking mode: The communication is performed using Interrupts or DMA, these APIs return the HAL status. The end of the data processing will be indicated through the dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks will be executed respectively at the end of the transmit or receive process. The HAL_UART_ErrorCallback() user callback will be executed when a communication error is detected. (#) Blocking mode APIs are: (++) HAL_UART_Transmit() (++) HAL_UART_Receive() (#) Non Blocking mode APIs with Interrupt are: (++) HAL_UART_Transmit_IT() (++) HAL_UART_Receive_IT() (++) HAL_UART_IRQHandler() (#) Non Blocking mode functions with DMA are: (++) HAL_UART_Transmit_DMA() (++) HAL_UART_Receive_DMA() (#) A set of Transfer Complete Callbacks are provided in non blocking mode: (++) HAL_UART_TxCpltCallback() (++) HAL_UART_RxCpltCallback() (++) HAL_UART_ErrorCallback() [..] (@) In the Half duplex communication, it is forbidden to run the transmit and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. @endverbatim * @{ */ /** * @brief Sends an amount of data in blocking mode. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param pData Pointer to data buffer * @param Size Amount of data to be sent * @param Timeout Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) { uint16_t* tmp; uint32_t tickstart = 0U; /* Check that a Tx process is not already ongoing */ if(huart->gState == HAL_UART_STATE_READY) { if((pData == NULL ) || (Size == 0)) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(huart); huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState = HAL_UART_STATE_BUSY_TX; /* Init tickstart for timeout managment */ tickstart = HAL_GetTick(); huart->TxXferSize = Size; huart->TxXferCount = Size; while(huart->TxXferCount > 0U) { huart->TxXferCount--; if(huart->Init.WordLength == UART_WORDLENGTH_9B) { if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) { return HAL_TIMEOUT; } tmp = (uint16_t*) pData; huart->Instance->DR = (*tmp & (uint16_t)0x01FF); if(huart->Init.Parity == UART_PARITY_NONE) { pData +=2U; } else { pData +=1U; } } else { if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) { return HAL_TIMEOUT; } huart->Instance->DR = (*pData++ & (uint8_t)0xFF); } } if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) { return HAL_TIMEOUT; } /* At end of Tx process, restore huart->gState to Ready */ huart->gState = HAL_UART_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Receives an amount of data in blocking mode. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param pData Pointer to data buffer * @param Size Amount of data to be received * @param Timeout Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) { uint16_t* tmp; uint32_t tickstart = 0U; /* Check that a Rx process is not already ongoing */ if(huart->RxState == HAL_UART_STATE_READY) { if((pData == NULL ) || (Size == 0)) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(huart); huart->ErrorCode = HAL_UART_ERROR_NONE; huart->RxState = HAL_UART_STATE_BUSY_RX; /* Init tickstart for timeout managment */ tickstart = HAL_GetTick(); huart->RxXferSize = Size; huart->RxXferCount = Size; /* Check the remain data to be received */ while(huart->RxXferCount > 0U) { huart->RxXferCount--; if(huart->Init.WordLength == UART_WORDLENGTH_9B) { if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) { return HAL_TIMEOUT; } tmp = (uint16_t*) pData; if(huart->Init.Parity == UART_PARITY_NONE) { *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); pData +=2U; } else { *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF); pData +=1U; } } else { if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) { return HAL_TIMEOUT; } if(huart->Init.Parity == UART_PARITY_NONE) { *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); } else { *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); } } } /* At end of Rx process, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Sends an amount of data in non blocking mode. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param pData Pointer to data buffer * @param Size Amount of data to be sent * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) { /* Check that a Tx process is not already ongoing */ if(huart->gState == HAL_UART_STATE_READY) { if((pData == NULL ) || (Size == 0)) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(huart); huart->pTxBuffPtr = pData; huart->TxXferSize = Size; huart->TxXferCount = Size; huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState = HAL_UART_STATE_BUSY_TX; /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the UART Transmit data register empty Interrupt */ SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Receives an amount of data in non blocking mode * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param pData Pointer to data buffer * @param Size Amount of data to be received * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) { /* Check that a Rx process is not already ongoing */ if(huart->RxState == HAL_UART_STATE_READY) { if((pData == NULL ) || (Size == 0)) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(huart); huart->pRxBuffPtr = pData; huart->RxXferSize = Size; huart->RxXferCount = Size; huart->ErrorCode = HAL_UART_ERROR_NONE; huart->RxState = HAL_UART_STATE_BUSY_RX; /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ SET_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Enable the UART Parity Error and Data Register not empty Interrupts */ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Sends an amount of data in non blocking mode. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param pData Pointer to data buffer * @param Size Amount of data to be sent * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) { uint32_t *tmp; /* Check that a Tx process is not already ongoing */ if(huart->gState == HAL_UART_STATE_READY) { if((pData == NULL ) || (Size == 0)) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(huart); huart->pTxBuffPtr = pData; huart->TxXferSize = Size; huart->TxXferCount = Size; huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState = HAL_UART_STATE_BUSY_TX; /* Set the UART DMA transfer complete callback */ huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; /* Set the UART DMA Half transfer complete callback */ huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; /* Set the DMA error callback */ huart->hdmatx->XferErrorCallback = UART_DMAError; /* Set the DMA abort callback */ huart->hdmatx->XferAbortCallback = NULL; /* Enable the UART transmit DMA Stream */ tmp = (uint32_t*)&pData; HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size); /* Clear the TC flag in the SR register by writing 0 to it */ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC); /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the DMA transfer for transmit request by setting the DMAT bit in the UART CR3 register */ SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Receives an amount of data in non blocking mode. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param pData Pointer to data buffer * @param Size Amount of data to be received * @note When the UART parity is enabled (PCE = 1) the data received contain the parity bit. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) { uint32_t *tmp; /* Check that a Rx process is not already ongoing */ if(huart->RxState == HAL_UART_STATE_READY) { if((pData == NULL ) || (Size == 0)) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(huart); huart->pRxBuffPtr = pData; huart->RxXferSize = Size; huart->ErrorCode = HAL_UART_ERROR_NONE; huart->RxState = HAL_UART_STATE_BUSY_RX; /* Set the UART DMA transfer complete callback */ huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; /* Set the UART DMA Half transfer complete callback */ huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; /* Set the DMA error callback */ huart->hdmarx->XferErrorCallback = UART_DMAError; /* Set the DMA abort callback */ huart->hdmarx->XferAbortCallback = NULL; /* Enable the DMA Stream */ tmp = (uint32_t*)&pData; HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size); /* Clear the Overrun flag just before enabling the DMA Rx request: can be mandatory for the second transfer */ __HAL_UART_CLEAR_OREFLAG(huart); /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the UART Parity Error Interrupt */ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ SET_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Enable the DMA transfer for the receiver request by setting the DMAR bit in the UART CR3 register */ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Pauses the DMA Transfer. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) { uint32_t dmarequest = 0x00U; /* Process Locked */ __HAL_LOCK(huart); dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) { /* Disable the UART DMA Tx request */ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); } dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) { /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Disable the UART DMA Rx request */ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); } /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; } /** * @brief Resumes the DMA Transfer. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) { /* Process Locked */ __HAL_LOCK(huart); if(huart->gState == HAL_UART_STATE_BUSY_TX) { /* Enable the UART DMA Tx request */ SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); } if(huart->RxState == HAL_UART_STATE_BUSY_RX) { /* Clear the Overrun flag before resuming the Rx transfer*/ __HAL_UART_CLEAR_OREFLAG(huart); /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); SET_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Enable the UART DMA Rx request */ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); } /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; } /** * @brief Stops the DMA Transfer. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) { uint32_t dmarequest = 0x00U; /* The Lock is not implemented on this API to allow the user application to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback(): when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() */ /* Stop UART DMA Tx request if ongoing */ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Abort the UART DMA Tx channel */ if(huart->hdmatx != NULL) { HAL_DMA_Abort(huart->hdmatx); } UART_EndTxTransfer(huart); } /* Stop UART DMA Rx request if ongoing */ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel */ if(huart->hdmarx != NULL) { HAL_DMA_Abort(huart->hdmarx); } UART_EndRxTransfer(huart); } return HAL_OK; } /** * @brief Abort ongoing transfers (blocking mode). * @param huart UART handle. * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. * This procedure performs following operations : * - Disable PPP Interrupts * - Disable the DMA transfer in the peripheral register (if enabled) * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) { /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Disable the UART DMA Tx request if enabled */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Abort the UART DMA Tx channel: use blocking DMA Abort API (no callback) */ if(huart->hdmatx != NULL) { /* Set the UART DMA Abort callback to Null. No call back execution at end of DMA abort procedure */ huart->hdmatx->XferAbortCallback = NULL; HAL_DMA_Abort(huart->hdmatx); } } /* Disable the UART DMA Rx request if enabled */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel: use blocking DMA Abort API (no callback) */ if(huart->hdmarx != NULL) { /* Set the UART DMA Abort callback to Null. No call back execution at end of DMA abort procedure */ huart->hdmarx->XferAbortCallback = NULL; HAL_DMA_Abort(huart->hdmarx); } } /* Reset Tx and Rx transfer counters */ huart->TxXferCount = 0x00U; huart->RxXferCount = 0x00U; /* Reset ErrorCode */ huart->ErrorCode = HAL_UART_ERROR_NONE; /* Restore huart->RxState and huart->gState to Ready */ huart->RxState = HAL_UART_STATE_READY; huart->gState = HAL_UART_STATE_READY; return HAL_OK; } /** * @brief Abort ongoing Transmit transfer (blocking mode). * @param huart UART handle. * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. * This procedure performs following operations : * - Disable PPP Interrupts * - Disable the DMA transfer in the peripheral register (if enabled) * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) { /* Disable TXEIE and TCIE interrupts */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); /* Disable the UART DMA Tx request if enabled */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ if(huart->hdmatx != NULL) { /* Set the UART DMA Abort callback to Null. No call back execution at end of DMA abort procedure */ huart->hdmatx->XferAbortCallback = NULL; HAL_DMA_Abort(huart->hdmatx); } } /* Reset Tx transfer counter */ huart->TxXferCount = 0x00U; /* Restore huart->gState to Ready */ huart->gState = HAL_UART_STATE_READY; return HAL_OK; } /** * @brief Abort ongoing Receive transfer (blocking mode). * @param huart UART handle. * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. * This procedure performs following operations : * - Disable PPP Interrupts * - Disable the DMA transfer in the peripheral register (if enabled) * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) { /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Disable the UART DMA Rx request if enabled */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ if(huart->hdmarx != NULL) { /* Set the UART DMA Abort callback to Null. No call back execution at end of DMA abort procedure */ huart->hdmarx->XferAbortCallback = NULL; HAL_DMA_Abort(huart->hdmarx); } } /* Reset Rx transfer counter */ huart->RxXferCount = 0x00U; /* Restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; return HAL_OK; } /** * @brief Abort ongoing transfers (Interrupt mode). * @param huart UART handle. * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. * This procedure performs following operations : * - Disable PPP Interrupts * - Disable the DMA transfer in the peripheral register (if enabled) * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) * - Set handle State to READY * - At abort completion, call user abort complete callback * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) { uint32_t AbortCplt = 0x01U; /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised before any call to DMA Abort functions */ /* DMA Tx Handle is valid */ if(huart->hdmatx != NULL) { /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. Otherwise, set it to NULL */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; } else { huart->hdmatx->XferAbortCallback = NULL; } } /* DMA Rx Handle is valid */ if(huart->hdmarx != NULL) { /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. Otherwise, set it to NULL */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; } else { huart->hdmarx->XferAbortCallback = NULL; } } /* Disable the UART DMA Tx request if enabled */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { /* Disable DMA Tx at UART level */ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ if(huart->hdmatx != NULL) { /* UART Tx DMA Abort callback has already been initialised : will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ /* Abort DMA TX */ if(HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) { huart->hdmatx->XferAbortCallback = NULL; } else { AbortCplt = 0x00U; } } } /* Disable the UART DMA Rx request if enabled */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ if(huart->hdmarx != NULL) { /* UART Rx DMA Abort callback has already been initialised : will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ /* Abort DMA RX */ if(HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) { huart->hdmarx->XferAbortCallback = NULL; AbortCplt = 0x01U; } else { AbortCplt = 0x00U; } } } /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ if(AbortCplt == 0x01U) { /* Reset Tx and Rx transfer counters */ huart->TxXferCount = 0x00U; huart->RxXferCount = 0x00U; /* Reset ErrorCode */ huart->ErrorCode = HAL_UART_ERROR_NONE; /* Restore huart->gState and huart->RxState to Ready */ huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; /* As no DMA to be aborted, call directly user Abort complete callback */ HAL_UART_AbortCpltCallback(huart); } return HAL_OK; } /** * @brief Abort ongoing Transmit transfer (Interrupt mode). * @param huart UART handle. * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. * This procedure performs following operations : * - Disable PPP Interrupts * - Disable the DMA transfer in the peripheral register (if enabled) * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) * - Set handle State to READY * - At abort completion, call user abort complete callback * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status */ HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) { /* Disable TXEIE and TCIE interrupts */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); /* Disable the UART DMA Tx request if enabled */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ if(huart->hdmatx != NULL) { /* Set the UART DMA Abort callback : will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; /* Abort DMA TX */ if(HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) { /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ huart->hdmatx->XferAbortCallback(huart->hdmatx); } } else { /* Reset Tx transfer counter */ huart->TxXferCount = 0x00U; /* Restore huart->gState to Ready */ huart->gState = HAL_UART_STATE_READY; /* As no DMA to be aborted, call directly user Abort complete callback */ HAL_UART_AbortTransmitCpltCallback(huart); } } else { /* Reset Tx transfer counter */ huart->TxXferCount = 0x00U; /* Restore huart->gState to Ready */ huart->gState = HAL_UART_STATE_READY; /* As no DMA to be aborted, call directly user Abort complete callback */ HAL_UART_AbortTransmitCpltCallback(huart); } return HAL_OK; } /** * @brief Abort ongoing Receive transfer (Interrupt mode). * @param huart UART handle. * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. * This procedure performs following operations : * - Disable PPP Interrupts * - Disable the DMA transfer in the peripheral register (if enabled) * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) * - Set handle State to READY * - At abort completion, call user abort complete callback * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status */ HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) { /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Disable the UART DMA Rx request if enabled */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ if(huart->hdmarx != NULL) { /* Set the UART DMA Abort callback : will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; /* Abort DMA RX */ if(HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) { /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ huart->hdmarx->XferAbortCallback(huart->hdmarx); } } else { /* Reset Rx transfer counter */ huart->RxXferCount = 0x00U; /* Restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; /* As no DMA to be aborted, call directly user Abort complete callback */ HAL_UART_AbortReceiveCpltCallback(huart); } } else { /* Reset Rx transfer counter */ huart->RxXferCount = 0x00U; /* Restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; /* As no DMA to be aborted, call directly user Abort complete callback */ HAL_UART_AbortReceiveCpltCallback(huart); } return HAL_OK; } /** * @brief This function handles UART interrupt request. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval None */ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) { uint32_t isrflags = READ_REG(huart->Instance->SR); uint32_t cr1its = READ_REG(huart->Instance->CR1); uint32_t cr3its = READ_REG(huart->Instance->CR3); uint32_t errorflags = 0x00U; uint32_t dmarequest = 0x00U; /* If no error occurs */ errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE)); if(errorflags == RESET) { /* UART in mode Receiver -------------------------------------------------*/ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET)) { UART_Receive_IT(huart); return; } } /* If some errors occur */ if((errorflags != RESET) && (((cr3its & USART_CR3_EIE) != RESET) || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != RESET))) { /* UART parity error interrupt occurred ----------------------------------*/ if(((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET)) { huart->ErrorCode |= HAL_UART_ERROR_PE; } /* UART noise error interrupt occurred -----------------------------------*/ if(((isrflags & USART_SR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET)) { huart->ErrorCode |= HAL_UART_ERROR_NE; } /* UART frame error interrupt occurred -----------------------------------*/ if(((isrflags & USART_SR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET)) { huart->ErrorCode |= HAL_UART_ERROR_FE; } /* UART Over-Run interrupt occurred --------------------------------------*/ if(((isrflags & USART_SR_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET)) { huart->ErrorCode |= HAL_UART_ERROR_ORE; } /* Call UART Error Call back function if need be --------------------------*/ if(huart->ErrorCode != HAL_UART_ERROR_NONE) { /* UART in mode Receiver -----------------------------------------------*/ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET)) { UART_Receive_IT(huart); } /* If Overrun error occurs, or if any error occurs in DMA mode reception, consider error as blocking */ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); if(((huart->ErrorCode & HAL_UART_ERROR_ORE) != RESET) || dmarequest) { /* Blocking error : transfer is aborted Set the UART state ready to be able to start again the process, Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ UART_EndRxTransfer(huart); /* Disable the UART DMA Rx request if enabled */ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* Abort the UART DMA Rx channel */ if(huart->hdmarx != NULL) { /* Set the UART DMA Abort callback : will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; if(HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) { /* Call Directly XferAbortCallback function in case of error */ huart->hdmarx->XferAbortCallback(huart->hdmarx); } } else { /* Call user error callback */ HAL_UART_ErrorCallback(huart); } } else { /* Call user error callback */ HAL_UART_ErrorCallback(huart); } } else { /* Non Blocking error : transfer could go on. Error is notified to user through user error callback */ HAL_UART_ErrorCallback(huart); huart->ErrorCode = HAL_UART_ERROR_NONE; } } return; } /* End if some error occurs */ /* UART in mode Transmitter ------------------------------------------------*/ if(((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET)) { UART_Transmit_IT(huart); return; } /* UART in mode Transmitter end --------------------------------------------*/ if(((isrflags & USART_SR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET)) { UART_EndTransmit_IT(huart); return; } } /** * @brief Tx Transfer completed callbacks. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval None */ __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE: This function Should not be modified, when the callback is needed, the HAL_UART_TxCpltCallback could be implemented in the user file */ } /** * @brief Tx Half Transfer completed callbacks. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval None */ __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE: This function Should not be modified, when the callback is needed, the HAL_UART_TxCpltCallback could be implemented in the user file */ } /** * @brief Rx Transfer completed callbacks. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval None */ __weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE: This function Should not be modified, when the callback is needed, the HAL_UART_TxCpltCallback could be implemented in the user file */ } /** * @brief Rx Half Transfer completed callbacks. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval None */ __weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE: This function Should not be modified, when the callback is needed, the HAL_UART_TxCpltCallback could be implemented in the user file */ } /** * @brief UART error callbacks. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval None */ __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE: This function Should not be modified, when the callback is needed, the HAL_UART_ErrorCallback could be implemented in the user file */ } /** * @brief UART Abort Complete callback. * @param huart UART handle. * @retval None */ __weak void HAL_UART_AbortCpltCallback (UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE : This function should not be modified, when the callback is needed, the HAL_UART_AbortCpltCallback can be implemented in the user file. */ } /** * @brief UART Abort Complete callback. * @param huart UART handle. * @retval None */ __weak void HAL_UART_AbortTransmitCpltCallback (UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE : This function should not be modified, when the callback is needed, the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. */ } /** * @brief UART Abort Receive Complete callback. * @param huart UART handle. * @retval None */ __weak void HAL_UART_AbortReceiveCpltCallback (UART_HandleTypeDef *huart) { /* Prevent unused argument(s) compilation warning */ UNUSED(huart); /* NOTE : This function should not be modified, when the callback is needed, the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. */ } /** * @} */ /** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions * @brief UART control functions * @verbatim ============================================================================== ##### Peripheral Control functions ##### ============================================================================== [..] This subsection provides a set of functions allowing to control the UART: (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character. (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode. (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software. @endverbatim * @{ */ /** * @brief Transmits break characters. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) { /* Check the parameters */ assert_param(IS_UART_INSTANCE(huart->Instance)); /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; /* Send break characters */ SET_BIT(huart->Instance->CR1, USART_CR1_SBK); huart->gState = HAL_UART_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; } /** * @brief Enters the UART in mute mode. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) { /* Check the parameters */ assert_param(IS_UART_INSTANCE(huart->Instance)); /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ SET_BIT(huart->Instance->CR1, USART_CR1_RWU); huart->gState = HAL_UART_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; } /** * @brief Exits the UART mute mode: wake up software. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart) { /* Check the parameters */ assert_param(IS_UART_INSTANCE(huart->Instance)); /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU); huart->gState = HAL_UART_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; } /** * @brief Enables the UART transmitter and disables the UART receiver. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) { uint32_t tmpreg = 0x00U; /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; /*-------------------------- USART CR1 Configuration -----------------------*/ tmpreg = huart->Instance->CR1; /* Clear TE and RE bits */ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE)); /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ tmpreg |= (uint32_t)USART_CR1_TE; /* Write to USART CR1 */ WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg); huart->gState = HAL_UART_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; } /** * @brief Enables the UART receiver and disables the UART transmitter. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) { uint32_t tmpreg = 0x00U; /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; /*-------------------------- USART CR1 Configuration -----------------------*/ tmpreg = huart->Instance->CR1; /* Clear TE and RE bits */ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE)); /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ tmpreg |= (uint32_t)USART_CR1_RE; /* Write to USART CR1 */ WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg); huart->gState = HAL_UART_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; } /** * @} */ /** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions * @brief UART State and Errors functions * @verbatim ============================================================================== ##### Peripheral State and Errors functions ##### ============================================================================== [..] This subsection provides a set of functions allowing to return the State of UART communication process, return Peripheral Errors occurred during communication process (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral. (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication. @endverbatim * @{ */ /** * @brief Returns the UART state. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL state */ HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) { uint32_t temp1= 0x00U, temp2 = 0x00U; temp1 = huart->gState; temp2 = huart->RxState; return (HAL_UART_StateTypeDef)(temp1 | temp2); } /** * @brief Return the UART error code * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART. * @retval UART Error Code */ uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) { return huart->ErrorCode; } /** * @} */ /** * @brief DMA UART transmit process complete callback. * @param hdma DMA handle * @retval None */ static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; /* DMA Normal mode*/ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) { huart->TxXferCount = 0U; /* Disable the DMA transfer for transmit request by setting the DMAT bit in the UART CR3 register */ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); /* Enable the UART Transmit Complete Interrupt */ SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); } /* DMA Circular mode */ else { HAL_UART_TxCpltCallback(huart); } } /** * @brief DMA UART transmit process half complete callback * @param hdma pointer to a DMA_HandleTypeDef structure that contains * the configuration information for the specified DMA module. * @retval None */ static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; HAL_UART_TxHalfCpltCallback(huart); } /** * @brief DMA UART receive process complete callback. * @param hdma DMA handle * @retval None */ static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; /* DMA Normal mode*/ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) { huart->RxXferCount = 0U; /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Disable the DMA transfer for the receiver request by setting the DMAR bit in the UART CR3 register */ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); /* At end of Rx process, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; } HAL_UART_RxCpltCallback(huart); } /** * @brief DMA UART receive process half complete callback * @param hdma pointer to a DMA_HandleTypeDef structure that contains * the configuration information for the specified DMA module. * @retval None */ static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; HAL_UART_RxHalfCpltCallback(huart); } /** * @brief DMA UART communication error callback. * @param hdma DMA handle * @retval None */ static void UART_DMAError(DMA_HandleTypeDef *hdma) { uint32_t dmarequest = 0x00U; UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; /* Stop UART DMA Tx request if ongoing */ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) { huart->TxXferCount = 0U; UART_EndTxTransfer(huart); } /* Stop UART DMA Rx request if ongoing */ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) { huart->RxXferCount = 0U; UART_EndRxTransfer(huart); } huart->ErrorCode |= HAL_UART_ERROR_DMA; HAL_UART_ErrorCallback(huart); } /** * @brief This function handles UART Communication Timeout. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @param Flag specifies the UART flag to check. * @param Status The new Flag status (SET or RESET). * @param Tickstart Tick start value * @param Timeout Timeout duration * @retval HAL status */ static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) { /* Wait until flag is set */ while((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) { /* Check for the Timeout */ if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout)) { /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_TIMEOUT; } } } return HAL_OK; } /** * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). * @param huart UART handle. * @retval None */ static void UART_EndTxTransfer(UART_HandleTypeDef *huart) { /* Disable TXEIE and TCIE interrupts */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); /* At end of Tx process, restore huart->gState to Ready */ huart->gState = HAL_UART_STATE_READY; } /** * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). * @param huart UART handle. * @retval None */ static void UART_EndRxTransfer(UART_HandleTypeDef *huart) { /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* At end of Rx process, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; } /** * @brief DMA UART communication abort callback, when initiated by HAL services on Error * (To be called at end of DMA Abort procedure following error occurrence). * @param hdma DMA handle. * @retval None */ static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; huart->RxXferCount = 0U; huart->TxXferCount = 0U; HAL_UART_ErrorCallback(huart); } /** * @brief DMA UART Tx communication abort callback, when initiated by user * (To be called at end of DMA Tx Abort procedure following user abort request). * @note When this callback is executed, User Abort complete call back is called only if no * Abort still ongoing for Rx DMA Handle. * @param hdma DMA handle. * @retval None */ static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; huart->hdmatx->XferAbortCallback = NULL; /* Check if an Abort process is still ongoing */ if(huart->hdmarx != NULL) { if(huart->hdmarx->XferAbortCallback != NULL) { return; } } /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ huart->TxXferCount = 0x00U; huart->RxXferCount = 0x00U; /* Reset ErrorCode */ huart->ErrorCode = HAL_UART_ERROR_NONE; /* Restore huart->gState and huart->RxState to Ready */ huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; /* Call user Abort complete callback */ HAL_UART_AbortCpltCallback(huart); } /** * @brief DMA UART Rx communication abort callback, when initiated by user * (To be called at end of DMA Rx Abort procedure following user abort request). * @note When this callback is executed, User Abort complete call back is called only if no * Abort still ongoing for Tx DMA Handle. * @param hdma DMA handle. * @retval None */ static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; huart->hdmarx->XferAbortCallback = NULL; /* Check if an Abort process is still ongoing */ if(huart->hdmatx != NULL) { if(huart->hdmatx->XferAbortCallback != NULL) { return; } } /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ huart->TxXferCount = 0x00U; huart->RxXferCount = 0x00U; /* Reset ErrorCode */ huart->ErrorCode = HAL_UART_ERROR_NONE; /* Restore huart->gState and huart->RxState to Ready */ huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; /* Call user Abort complete callback */ HAL_UART_AbortCpltCallback(huart); } /** * @brief DMA UART Tx communication abort callback, when initiated by user by a call to * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) * (This callback is executed at end of DMA Tx Abort procedure following user abort request, * and leads to user Tx Abort Complete callback execution). * @param hdma DMA handle. * @retval None */ static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; huart->TxXferCount = 0x00U; /* Restore huart->gState to Ready */ huart->gState = HAL_UART_STATE_READY; /* Call user Abort complete callback */ HAL_UART_AbortTransmitCpltCallback(huart); } /** * @brief DMA UART Rx communication abort callback, when initiated by user by a call to * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) * (This callback is executed at end of DMA Rx Abort procedure following user abort request, * and leads to user Rx Abort Complete callback execution). * @param hdma DMA handle. * @retval None */ static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; huart->RxXferCount = 0x00U; /* Restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; /* Call user Abort complete callback */ HAL_UART_AbortReceiveCpltCallback(huart); } /** * @brief Sends an amount of data in non blocking mode. * @param huart Pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart) { uint16_t* tmp; /* Check that a Tx process is ongoing */ if(huart->gState == HAL_UART_STATE_BUSY_TX) { if(huart->Init.WordLength == UART_WORDLENGTH_9B) { tmp = (uint16_t*) huart->pTxBuffPtr; huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); if(huart->Init.Parity == UART_PARITY_NONE) { huart->pTxBuffPtr += 2U; } else { huart->pTxBuffPtr += 1U; } } else { huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FF); } if(--huart->TxXferCount == 0U) { /* Disable the UART Transmit Complete Interrupt */ CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); /* Enable the UART Transmit Complete Interrupt */ SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); } return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Wraps up transmission in non blocking mode. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart) { /* Disable the UART Transmit Complete Interrupt */ CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); /* Tx process is ended, restore huart->gState to Ready */ huart->gState = HAL_UART_STATE_READY; HAL_UART_TxCpltCallback(huart); return HAL_OK; } /** * @brief Receives an amount of data in non blocking mode * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval HAL status */ static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart) { uint16_t* tmp; /* Check that a Rx process is ongoing */ if(huart->RxState == HAL_UART_STATE_BUSY_RX) { if(huart->Init.WordLength == UART_WORDLENGTH_9B) { tmp = (uint16_t*) huart->pRxBuffPtr; if(huart->Init.Parity == UART_PARITY_NONE) { *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); huart->pRxBuffPtr += 2U; } else { *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF); huart->pRxBuffPtr += 1U; } } else { if(huart->Init.Parity == UART_PARITY_NONE) { *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); } else { *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); } } if(--huart->RxXferCount == 0U) { /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); /* Rx process is completed, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; HAL_UART_RxCpltCallback(huart); return HAL_OK; } return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Configures the UART peripheral. * @param huart pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART module. * @retval None */ static void UART_SetConfig(UART_HandleTypeDef *huart) { uint32_t tmpreg = 0x00U; /* Check the parameters */ assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); assert_param(IS_UART_PARITY(huart->Init.Parity)); assert_param(IS_UART_MODE(huart->Init.Mode)); /*-------------------------- USART CR2 Configuration -----------------------*/ tmpreg = huart->Instance->CR2; /* Clear STOP[13:12] bits */ tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP); /* Configure the UART Stop Bits: Set STOP[13:12] bits according to huart->Init.StopBits value */ tmpreg |= (uint32_t)huart->Init.StopBits; /* Write to USART CR2 */ WRITE_REG(huart->Instance->CR2, (uint32_t)tmpreg); /*-------------------------- USART CR1 Configuration -----------------------*/ tmpreg = huart->Instance->CR1; /* Clear M, PCE, PS, TE and RE bits */ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \ USART_CR1_RE | USART_CR1_OVER8)); /* Configure the UART Word Length, Parity and mode: Set the M bits according to huart->Init.WordLength value Set PCE and PS bits according to huart->Init.Parity value Set TE and RE bits according to huart->Init.Mode value Set OVER8 bit according to huart->Init.OverSampling value */ tmpreg |= (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling; /* Write to USART CR1 */ WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg); /*-------------------------- USART CR3 Configuration -----------------------*/ tmpreg = huart->Instance->CR3; /* Clear CTSE and RTSE bits */ tmpreg &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)); /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */ tmpreg |= huart->Init.HwFlowCtl; /* Write to USART CR3 */ WRITE_REG(huart->Instance->CR3, (uint32_t)tmpreg); /* Check the Over Sampling */ if(huart->Init.OverSampling == UART_OVERSAMPLING_8) { /*-------------------------- USART BRR Configuration ---------------------*/ #if defined(USART6) if((huart->Instance == USART1) || (huart->Instance == USART6)) { huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); } #else if(huart->Instance == USART1) { huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); } #endif /* USART6 */ else { huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate); } } else { /*-------------------------- USART BRR Configuration ---------------------*/ #if defined(USART6) if((huart->Instance == USART1) || (huart->Instance == USART6)) { huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); } #else if(huart->Instance == USART1) { huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); } #endif /* USART6 */ else { huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate); } } } /** * @} */ #endif /* HAL_UART_MODULE_ENABLED */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/