view wiki/Using OpenSTM32.md @ 856:af035b883382 Evo_2_23

Do not show SP tab if PSCR mode is active: In the previous version the setpoint tab was shown even if operation mode PSCR was selected. SPs do not matter for PSCR operation and will not be shown in the new version.
author Ideenmodellierer
date Sun, 05 May 2024 17:20:56 +0200
parents 0e7c16dd774d
children
line wrap: on
line source

# Using OpenSTM32 IDE to Compile OSTC4 Firmware #

The free and Open [STM32 IDE](http://www.openstm32.org/System%2BWorkbench%2Bfor%2BSTM32) is an integrated development environment based on _Eclipse_ that will allows you to compile and link code for the OSTC4 dive computer.
You will then be able to generate `.bin` firmware files to upload to your computer using your favourite tools, eg. [OSTC Companion](https://ostc-planner.net/companion). 

1. Register on http://www.openstm32.org/ : that will allows you to download the IDE.
2. Once registered and logged in, you can go to _Documentation_ and _Installation Manual_. Follow the instructions to install the IDE (available for Windows 7, MacOS and Linux).
3. Use the ready made project ... in ... 

Or you can create a brand new project by following the _How To_'s:

- [HowTo compile CPU1-Discovery main firmware](Detailed CPU1-Discovery Project.md)
- [HowTo compile CPU1-Discovery protected area firmware](Detailed CPU1-Upper Project.md)
- [HowTo compile CPU2-RTE real-time firmware](Detailed CPU2-RTE Project.md)
- [HowTo generate uploadable firmware file](Make Firmware File.md)