view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h @ 856:af035b883382 Evo_2_23

Do not show SP tab if PSCR mode is active: In the previous version the setpoint tab was shown even if operation mode PSCR was selected. SPs do not matter for PSCR operation and will not be shown in the new version.
author Ideenmodellierer
date Sun, 05 May 2024 17:20:56 +0200
parents c78bcbd5deda
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    stm32f4xx_hal_dcmi.h
  * @author  MCD Application Team
  * @brief   Header file of DCMI HAL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_DCMI_H
#define __STM32F4xx_HAL_DCMI_H

#ifdef __cplusplus
 extern "C" {
#endif

#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
    defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\
    defined(STM32F479xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"

/* Include DCMI HAL Extended module */
/* (include on top of file since DCMI structures are defined in extended file) */
#include "stm32f4xx_hal_dcmi_ex.h"

/** @addtogroup STM32F4xx_HAL_Driver
  * @{
  */

/** @addtogroup DCMI DCMI
  * @brief DCMI HAL module driver
  * @{
  */

/* Exported types ------------------------------------------------------------*/
/** @defgroup DCMI_Exported_Types DCMI Exported Types
  * @{
  */
/**
  * @brief  HAL DCMI State structures definition
  */ 
typedef enum
{
  HAL_DCMI_STATE_RESET             = 0x00U,  /*!< DCMI not yet initialized or disabled  */
  HAL_DCMI_STATE_READY             = 0x01U,  /*!< DCMI initialized and ready for use    */
  HAL_DCMI_STATE_BUSY              = 0x02U,  /*!< DCMI internal processing is ongoing   */
  HAL_DCMI_STATE_TIMEOUT           = 0x03U,  /*!< DCMI timeout state                    */
  HAL_DCMI_STATE_ERROR             = 0x04U,  /*!< DCMI error state                      */
  HAL_DCMI_STATE_SUSPENDED         = 0x05U   /*!< DCMI suspend state                    */
}HAL_DCMI_StateTypeDef;

/** 
  * @brief  DCMI handle Structure definition
  */
typedef struct
{
  DCMI_TypeDef                  *Instance;           /*!< DCMI Register base address   */

  DCMI_InitTypeDef              Init;                /*!< DCMI parameters              */

  HAL_LockTypeDef               Lock;                /*!< DCMI locking object          */

  __IO HAL_DCMI_StateTypeDef    State;               /*!< DCMI state                   */

  __IO uint32_t                 XferCount;           /*!< DMA transfer counter         */

  __IO uint32_t                 XferSize;            /*!< DMA transfer size            */

  uint32_t                      XferTransferNumber;  /*!< DMA transfer number          */

  uint32_t                      pBuffPtr;            /*!< Pointer to DMA output buffer */

  DMA_HandleTypeDef             *DMA_Handle;         /*!< Pointer to the DMA handler   */

  __IO uint32_t                 ErrorCode;           /*!< DCMI Error code              */

}DCMI_HandleTypeDef;
/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/
/** @defgroup DCMI_Exported_Constants DCMI Exported Constants
  * @{
  */

/** @defgroup DCMI_Error_Code DCMI Error Code
  * @{
  */
#define HAL_DCMI_ERROR_NONE      0x00000000U    /*!< No error              */
#define HAL_DCMI_ERROR_OVR       0x00000001U    /*!< Overrun error         */
#define HAL_DCMI_ERROR_SYNC      0x00000002U    /*!< Synchronization error */
#define HAL_DCMI_ERROR_TIMEOUT   0x00000020U    /*!< Timeout error         */
#define HAL_DCMI_ERROR_DMA       0x00000040U    /*!< DMA error             */
/**
  * @}
  */

/** @defgroup DCMI_Capture_Mode DCMI Capture Mode
  * @{
  */ 
#define DCMI_MODE_CONTINUOUS         0x00000000U               /*!< The received data are transferred continuously
                                                                    into the destination memory through the DMA             */
#define DCMI_MODE_SNAPSHOT             ((uint32_t)DCMI_CR_CM)  /*!< Once activated, the interface waits for the start of
                                                                    frame and then transfers a single frame through the DMA */
/**
  * @}
  */

/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode
  * @{
  */
#define DCMI_SYNCHRO_HARDWARE        0x00000000U               /*!< Hardware synchronization data capture (frame/line start/stop)
                                                                    is synchronized with the HSYNC/VSYNC signals                  */
#define DCMI_SYNCHRO_EMBEDDED        ((uint32_t)DCMI_CR_ESS)   /*!< Embedded synchronization data capture is synchronized with
                                                                    synchronization codes embedded in the data flow               */

/**
  * @}
  */

/** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity
  * @{
  */
#define DCMI_PCKPOLARITY_FALLING     0x00000000U                 /*!< Pixel clock active on Falling edge */
#define DCMI_PCKPOLARITY_RISING      ((uint32_t)DCMI_CR_PCKPOL)  /*!< Pixel clock active on Rising edge  */

/**
  * @}
  */

/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity
  * @{
  */
#define DCMI_VSPOLARITY_LOW          0x00000000U                /*!< Vertical synchronization active Low  */
#define DCMI_VSPOLARITY_HIGH         ((uint32_t)DCMI_CR_VSPOL)  /*!< Vertical synchronization active High */

/**
  * @}
  */

/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity
  * @{
  */ 
#define DCMI_HSPOLARITY_LOW          0x00000000U                /*!< Horizontal synchronization active Low  */
#define DCMI_HSPOLARITY_HIGH         ((uint32_t)DCMI_CR_HSPOL)  /*!< Horizontal synchronization active High */

/**
  * @}
  */

/** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG
  * @{
  */
#define DCMI_JPEG_DISABLE            0x00000000U               /*!< Mode JPEG Disabled  */
#define DCMI_JPEG_ENABLE             ((uint32_t)DCMI_CR_JPEG)  /*!< Mode JPEG Enabled   */

/**
  * @}
  */

/** @defgroup DCMI_Capture_Rate DCMI Capture Rate
  * @{
  */
#define DCMI_CR_ALL_FRAME            0x00000000U                 /*!< All frames are captured        */
#define DCMI_CR_ALTERNATE_2_FRAME    ((uint32_t)DCMI_CR_FCRC_0)  /*!< Every alternate frame captured */
#define DCMI_CR_ALTERNATE_4_FRAME    ((uint32_t)DCMI_CR_FCRC_1)  /*!< One frame in 4 frames captured */

/**
  * @}
  */

/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode
  * @{
  */
#define DCMI_EXTEND_DATA_8B     0x00000000U                                  /*!< Interface captures 8-bit data on every pixel clock  */
#define DCMI_EXTEND_DATA_10B    ((uint32_t)DCMI_CR_EDM_0)                    /*!< Interface captures 10-bit data on every pixel clock */
#define DCMI_EXTEND_DATA_12B    ((uint32_t)DCMI_CR_EDM_1)                    /*!< Interface captures 12-bit data on every pixel clock */
#define DCMI_EXTEND_DATA_14B    ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1))  /*!< Interface captures 14-bit data on every pixel clock */

/**
  * @}
  */

/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate
  * @{
  */
#define DCMI_WINDOW_COORDINATE    0x3FFFU   /*!< Window coordinate */

/**
  * @}
  */

/** @defgroup DCMI_Window_Height DCMI Window Height
  * @{
  */ 
#define DCMI_WINDOW_HEIGHT        0x1FFFU   /*!< Window Height */

/**
  * @}
  */

/** @defgroup DCMI_Window_Vertical_Line DCMI Window Vertical Line
  * @{
  */
#define DCMI_POSITION_CWSIZE_VLINE         (uint32_t)DCMI_CWSIZE_VLINE_Pos /*!< Required left shift to set crop window vertical line count       */
#define DCMI_POSITION_CWSTRT_VST           (uint32_t)DCMI_CWSTRT_VST_Pos   /*!< Required left shift to set crop window vertical start line count */

/**
  * @}
  */

/** @defgroup DCMI_interrupt_sources  DCMI interrupt sources
  * @{
  */
#define DCMI_IT_FRAME    ((uint32_t)DCMI_IER_FRAME_IE)    /*!< Capture complete interrupt      */
#define DCMI_IT_OVR      ((uint32_t)DCMI_IER_OVR_IE)      /*!< Overrun interrupt               */
#define DCMI_IT_ERR      ((uint32_t)DCMI_IER_ERR_IE)      /*!< Synchronization error interrupt */
#define DCMI_IT_VSYNC    ((uint32_t)DCMI_IER_VSYNC_IE)    /*!< VSYNC interrupt                 */
#define DCMI_IT_LINE     ((uint32_t)DCMI_IER_LINE_IE)     /*!< Line interrupt                  */
/**
  * @}
  */

/** @defgroup DCMI_Flags DCMI Flags
  * @{
  */

/** 
  * @brief   DCMI SR register
  */
#define DCMI_FLAG_HSYNC     ((uint32_t)DCMI_SR_INDEX|DCMI_SR_HSYNC) /*!< HSYNC pin state (active line / synchronization between lines)   */
#define DCMI_FLAG_VSYNC     ((uint32_t)DCMI_SR_INDEX|DCMI_SR_VSYNC) /*!< VSYNC pin state (active frame / synchronization between frames) */
#define DCMI_FLAG_FNE       ((uint32_t)DCMI_SR_INDEX|DCMI_SR_FNE)   /*!< FIFO not empty flag                                             */
/** 
  * @brief   DCMI RIS register
  */ 
#define DCMI_FLAG_FRAMERI    ((uint32_t)DCMI_RISR_FRAME_RIS)  /*!< Frame capture complete interrupt flag */
#define DCMI_FLAG_OVRRI      ((uint32_t)DCMI_RISR_OVR_RIS)    /*!< Overrun interrupt flag                */
#define DCMI_FLAG_ERRRI      ((uint32_t)DCMI_RISR_ERR_RIS)    /*!< Synchronization error interrupt flag  */
#define DCMI_FLAG_VSYNCRI    ((uint32_t)DCMI_RISR_VSYNC_RIS)  /*!< VSYNC interrupt flag                  */
#define DCMI_FLAG_LINERI     ((uint32_t)DCMI_RISR_LINE_RIS)   /*!< Line interrupt flag                   */
/** 
  * @brief   DCMI MIS register
  */ 
#define DCMI_FLAG_FRAMEMI    ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_FRAME_MIS)  /*!< DCMI Frame capture complete masked interrupt status */
#define DCMI_FLAG_OVRMI      ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_OVR_MIS  )  /*!< DCMI Overrun masked interrupt status                */
#define DCMI_FLAG_ERRMI      ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_ERR_MIS  )  /*!< DCMI Synchronization error masked interrupt status  */
#define DCMI_FLAG_VSYNCMI    ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_VSYNC_MIS)  /*!< DCMI VSYNC masked interrupt status                  */
#define DCMI_FLAG_LINEMI     ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_LINE_MIS )  /*!< DCMI Line masked interrupt status                   */
/**
  * @}
  */

/**
  * @}
  */
 
/* Exported macro ------------------------------------------------------------*/
/** @defgroup DCMI_Exported_Macros DCMI Exported Macros
  * @{
  */
  
/** @brief Reset DCMI handle state
  * @param  __HANDLE__ specifies the DCMI handle.
  * @retval None
  */
#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET)

/**
  * @brief  Enable the DCMI.
  * @param  __HANDLE__ DCMI handle
  * @retval None
  */
#define __HAL_DCMI_ENABLE(__HANDLE__)    ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)

/**
  * @brief  Disable the DCMI.
  * @param  __HANDLE__ DCMI handle
  * @retval None
  */
#define __HAL_DCMI_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))

/* Interrupt & Flag management */
/**
  * @brief  Get the DCMI pending flag.
  * @param  __HANDLE__ DCMI handle
  * @param  __FLAG__ Get the specified flag.
  *         This parameter can be one of the following values (no combination allowed)
  *            @arg DCMI_FLAG_HSYNC: HSYNC pin state (active line / synchronization between lines)
  *            @arg DCMI_FLAG_VSYNC: VSYNC pin state (active frame / synchronization between frames)
  *            @arg DCMI_FLAG_FNE: FIFO empty flag
  *            @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
  *            @arg DCMI_FLAG_OVRRI: Overrun flag mask
  *            @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
  *            @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
  *            @arg DCMI_FLAG_LINERI: Line flag mask
  *            @arg DCMI_FLAG_FRAMEMI: DCMI Capture complete masked interrupt status
  *            @arg DCMI_FLAG_OVRMI: DCMI Overrun masked interrupt status
  *            @arg DCMI_FLAG_ERRMI: DCMI Synchronization error masked interrupt status
  *            @arg DCMI_FLAG_VSYNCMI: DCMI VSYNC masked interrupt status
  *            @arg DCMI_FLAG_LINEMI: DCMI Line masked interrupt status
  * @retval The state of FLAG.
  */
#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
((((__FLAG__) & (DCMI_SR_INDEX|DCMI_MIS_INDEX)) == 0x0U)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\
 (((__FLAG__) & DCMI_SR_INDEX) == 0x0U)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))

/**
  * @brief  Clear the DCMI pending flags.
  * @param  __HANDLE__ DCMI handle
  * @param  __FLAG__ specifies the flag to clear.
  *         This parameter can be any combination of the following values:
  *            @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
  *            @arg DCMI_FLAG_OVRRI: Overrun flag mask
  *            @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
  *            @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
  *            @arg DCMI_FLAG_LINERI: Line flag mask
  * @retval None
  */
#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))

/**
  * @brief  Enable the specified DCMI interrupts.
  * @param  __HANDLE__    DCMI handle
  * @param  __INTERRUPT__ specifies the DCMI interrupt sources to be enabled.
  *         This parameter can be any combination of the following values:
  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
  *            @arg DCMI_IT_OVR: Overrun interrupt mask
  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
  *            @arg DCMI_IT_LINE: Line interrupt mask
  * @retval None
  */
#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))

/**
  * @brief  Disable the specified DCMI interrupts.
  * @param  __HANDLE__ DCMI handle
  * @param  __INTERRUPT__ specifies the DCMI interrupt sources to be enabled.
  *         This parameter can be any combination of the following values:
  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
  *            @arg DCMI_IT_OVR: Overrun interrupt mask
  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
  *            @arg DCMI_IT_LINE: Line interrupt mask
  * @retval None
  */
#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))

/**
  * @brief  Check whether the specified DCMI interrupt has occurred or not.
  * @param  __HANDLE__ DCMI handle
  * @param  __INTERRUPT__ specifies the DCMI interrupt source to check.
  *         This parameter can be one of the following values:
  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
  *            @arg DCMI_IT_OVR: Overrun interrupt mask
  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
  *            @arg DCMI_IT_LINE: Line interrupt mask
  * @retval The state of INTERRUPT.
  */
#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))

/**
  * @}
  */
  
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DCMI_Exported_Functions DCMI Exported Functions
  * @{
  */

/** @addtogroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
 * @{
 */
/* Initialization and de-initialization functions *****************************/
HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
void              HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
void              HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
/**
  * @}
  */

/** @addtogroup DCMI_Exported_Functions_Group2 IO operation functions
 * @{
 */
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
HAL_StatusTypeDef HAL_DCMI_Suspend(DCMI_HandleTypeDef* hdcmi);
HAL_StatusTypeDef HAL_DCMI_Resume(DCMI_HandleTypeDef* hdcmi);
void              HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
void              HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
void              HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
void              HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
void              HAL_DCMI_VsyncCallback(DCMI_HandleTypeDef *hdcmi);
void              HAL_DCMI_HsyncCallback(DCMI_HandleTypeDef *hdcmi);
void              HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
/**
  * @}
  */
  
/** @addtogroup DCMI_Exported_Functions_Group3 Peripheral Control functions
 * @{
 */
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_DCMI_ConfigCrop(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
HAL_StatusTypeDef HAL_DCMI_EnableCrop(DCMI_HandleTypeDef *hdcmi);
HAL_StatusTypeDef HAL_DCMI_DisableCrop(DCMI_HandleTypeDef *hdcmi);
/**
  * @}
  */
  
/** @addtogroup DCMI_Exported_Functions_Group4 Peripheral State functions
 * @{
 */
/* Peripheral State functions *************************************************/
HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
uint32_t              HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
/**
  * @}
  */

/**
  * @}
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup DCMI_Private_Constants DCMI Private Constants
  * @{
  */
#define DCMI_MIS_INDEX        0x1000U /*!< DCMI MIS register index */
#define DCMI_SR_INDEX         0x2000U /*!< DCMI SR register index  */
/**
  * @}
  */   
/* Private macro -------------------------------------------------------------*/
/** @defgroup DCMI_Private_Macros DCMI Private Macros
  * @{
  */
#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
                                   ((MODE) == DCMI_MODE_SNAPSHOT))

#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
                              ((MODE) == DCMI_SYNCHRO_EMBEDDED))
                              
#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
                                      ((POLARITY) == DCMI_PCKPOLARITY_RISING))
                                      
#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
                                     ((POLARITY) == DCMI_VSPOLARITY_HIGH))
                                     
#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
                                     ((POLARITY) == DCMI_HSPOLARITY_HIGH))
                                     
#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
                                     ((JPEG_MODE) == DCMI_JPEG_ENABLE))
                                     
#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME)         || \
                                    ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
                                    ((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
                                    
#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B)  || \
                                    ((DATA) == DCMI_EXTEND_DATA_10B) || \
                                    ((DATA) == DCMI_EXTEND_DATA_12B) || \
                                    ((DATA) == DCMI_EXTEND_DATA_14B))
                                    
#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)

#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)

/**
  * @}
  */

/* Private functions ---------------------------------------------------------*/
/** @addtogroup DCMI_Private_Functions DCMI Private Functions
  * @{
  */
  
/**
  * @}
  */
      
#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
          STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
          STM32F479xx */

/**
  * @}
  */
    
/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F4xx_HAL_DCMI_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/