view Small_CPU/Src/batteryGasGauge.c @ 787:aeb72882f30a

Dev Bugfx Empty buffer indication and stability improvments: The mux prototype used ASCII coding for channel selection while the current realization used real number (0...4) for addressing the mux. The UART read function uses the '0' to indicate an empty buffer element. The mux now loops back '0' used by channel selection causing the read function to process the data. As result data interrups are visible at the display. To avoid this another character has been defined indicate empty buffer locations. Beside this the functionality has been improved with regard to access speed and better recovery in case of transition failure.
author Ideenmodellierer
date Sun, 04 Jun 2023 21:59:26 +0200
parents 079bb5b22c06
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    batteryGasGauge.c 
  * @author  heinrichs weikamp gmbh
  * @version V0.0.1
  * @date    09-Dec-2014
  * @brief   LTC2942 Battery Gas Gauge
  *           
  @verbatim                 
  ============================================================================== 
                ##### stm32f4xx_hal_i2c.c modification #####
  ============================================================================== 
	The LTC2942 requires an repeated start condition without stop condition
	for data reception.
	
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */ 
/* Includes ------------------------------------------------------------------*/
#include <string.h>	/* memset */
#include "batteryGasGauge.h"
#include "baseCPU2.h"
#include "stm32f4xx_hal.h"
#include "i2c.h"

static float battery_f_voltage = BATTERY_DEFAULT_VOLTAGE;		/* max assumed voltage */
static float battery_f_charge_percent = 0;
static uint8_t chargeValueKnown = 0;							/* indicator if the charge of the battery is known (for example after a full charge cycle) */


#define BGG_BATTERY_OFFSET          (26123)  //; 65536-(3,35Ah/0,085mAh)
#define BGG_BATTERY_DIVIDER         (394)    //; 3,35Ah/0,085mAh/100 [%]

float get_voltage(void)
{
#ifdef OSTC_ON_DISCOVERY_HARDWARE
	return 3.0f;
#endif

	return battery_f_voltage;
}


float get_charge(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return 100.0f;
	#endif
	
	return battery_f_charge_percent;
}


void init_battery_gas_gauge(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	uint8_t buffer[2];
	buffer[0] = 0x01;

	// F8 = 11111000:
	// ADC auto mode (11)
	// Prescale M = 128 (111)
	// AL/CC pin disable (00)
	// Shutdown (0)
	buffer[1] = 0xF8;
	I2C_Master_Transmit(DEVICE_BATTERYGAUGE, buffer, 2);
}

uint8_t battery_gas_gauge_CheckConfigOK(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif

	uint8_t retval = 0;
	uint8_t bufferReceive[10];

	memset(bufferReceive,0,sizeof(bufferReceive));

	I2C_Master_Receive(DEVICE_BATTERYGAUGE, bufferReceive, 10);
	if(bufferReceive[1] == 0xf8)
	{
		retval = 1;
	}
	return retval;
}

static void disable_adc(void)
{
	uint8_t buffer[2];
	buffer[0] = 0x01;

	// according to the datasheet of the LTC2942, the adc shall
	// be disabled when writing to the gauge registers

	// 0xF9 = 11111001:
	// see init_battery_gas_gauge()
	// Shutdown (1)
	buffer[1] = 0xF9;
	I2C_Master_Transmit(DEVICE_BATTERYGAUGE, buffer, 2);
}


void battery_gas_gauge_get_data(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	float battery_f_voltage_local;
	float battery_f_charge_percent_local;
	
	uint8_t bufferReceive[10];
	
	if(I2C_Master_Receive(DEVICE_BATTERYGAUGE, bufferReceive, 10) == HAL_OK)
	{
		battery_f_voltage_local =  (float)(bufferReceive[8] * 256);
		battery_f_voltage_local += (float)(bufferReceive[9]);
		battery_f_voltage_local *= (float)6 / (float)0xFFFF;
	
		// max/full: 0.085 mAh * 1 * 65535 = 5570 mAh
		battery_f_charge_percent_local =  (float)(bufferReceive[2] * 256);
		battery_f_charge_percent_local += (float)(bufferReceive[3]);
		battery_f_charge_percent_local -= BGG_BATTERY_OFFSET;		/* Because of the prescalar 128 the counter assumes a max value of 5570mAh => normalize to 3350mAh*/
		battery_f_charge_percent_local /= BGG_BATTERY_DIVIDER;		/* transform to percentage */

		if(battery_f_charge_percent_local < 0)
			battery_f_charge_percent_local = 0;

		battery_f_voltage = battery_f_voltage_local;
		battery_f_charge_percent = battery_f_charge_percent_local;
	}
}


void battery_gas_gauge_set_charge_full(void)
{
	disable_adc();
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	uint8_t bufferSend[3];
	bufferSend[0] = 0x02;
	bufferSend[1] = 0xFF;
	bufferSend[2] = 0xFF;
	I2C_Master_Transmit(  DEVICE_BATTERYGAUGE, bufferSend, 3);
	init_battery_gas_gauge();
	chargeValueKnown = 1;
}


void battery_gas_gauge_set(float percentage)
{

	disable_adc();
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif

	uint16_t mAhSend;
	
	if(percentage >= 100)
		mAhSend = 0xFFFF;
	else {
		mAhSend = (percentage * BGG_BATTERY_DIVIDER) + BGG_BATTERY_OFFSET;
	}
	
	uint8_t bufferSend[3];
	bufferSend[0] = 0x02;
	bufferSend[1] = (uint8_t)(mAhSend / 256);
	bufferSend[2] = (uint8_t)(mAhSend & 0xFF);
	I2C_Master_Transmit(  DEVICE_BATTERYGAUGE, bufferSend, 3);
	init_battery_gas_gauge();
	chargeValueKnown = 1;
}

uint8_t battery_gas_gauge_isChargeValueValid(void)
{
	return chargeValueKnown;
}

void battery_gas_gauge_setChargeValueValid(void)
{
	chargeValueKnown = 1;
}

/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/