view ostc4pack/README.linux @ 423:a560afdaadbf ImprovmentNVM_2

ext_Flash_write_sample erase sector optimization: The previous function erased a sector while writing sample data causing a delay of up to 200ms. The new implementation checks at the end of a write sample call if we are close to a sector end. In case we are a erase sector command will be send to the flash for the next sector. At the time of the next sample write (2 seconds later) the next sector is already erased and no busy wait of 200ms is needed => max write time for samples is not less than 5ms.
author ideenmodellierer
date Mon, 10 Feb 2020 19:40:33 +0100
parents 9c77cfe8c2b2
children
line wrap: on
line source

README.linux
------------

1. Compile the pack utilities

cd src
make checksum_final_add_fletcher
make OSTC4pack_V4

2. Edit create_full_update_bin.sh

Set BUILD_PATH to the location where you build the individual parts
of the firmware using the OpenSTM23 IDE. 

Set BUILD_TYPE the either Debug or Release (or any other build style you 
defined in the OpenSTM23 IDE).

Set the "build project names" as defined in the OpenSTM23 IDE.

3. Simpy run create_full_update_bin.sh

Run it in the ostc4pack folder of the repository, and a file with name
like OSTC4_<date>.bin is created containg the individual blobs.