Mercurial > public > ostc4
view Small_CPU/Src/uart.c @ 423:a560afdaadbf ImprovmentNVM_2
ext_Flash_write_sample erase sector optimization:
The previous function erased a sector while writing sample data causing a delay of up to 200ms. The new implementation checks at the end of a write sample call if we are close to a sector end. In case we are a erase sector command will be send to the flash for the next sector. At the time of the next sample write (2 seconds later) the next sector is already erased and no busy wait of 200ms is needed => max write time for samples is not less than 5ms.
author | ideenmodellierer |
---|---|
date | Mon, 10 Feb 2020 19:40:33 +0100 |
parents | 5f11787b4f42 |
children | 1b995079c045 |
line wrap: on
line source
/** ****************************************************************************** * @file uart.c * @author heinrichs weikamp gmbh * @version V0.0.1 * @date 27-March-2014 * @brief button control * @verbatim ============================================================================== ##### How to use ##### ============================================================================== @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "uart.h" /* Private variables ---------------------------------------------------------*/ UART_HandleTypeDef huart2; /* Exported functions --------------------------------------------------------*/ void MX_USART2_UART_Init(void) { /* pullup special */ GPIO_InitTypeDef GPIO_InitStructure; __GPIOA_CLK_ENABLE(); GPIO_InitStructure.Pin = GPIO_PIN_2; GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStructure.Pull = GPIO_PULLUP; GPIO_InitStructure.Speed = GPIO_SPEED_FAST; HAL_GPIO_Init(GPIOA, &GPIO_InitStructure); /* regular init */ huart2.Instance = USART2; huart2.Init.BaudRate = 1200; huart2.Init.WordLength = UART_WORDLENGTH_8B; huart2.Init.StopBits = UART_STOPBITS_1; huart2.Init.Parity = UART_PARITY_NONE; huart2.Init.Mode = UART_MODE_TX_RX; huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; huart2.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&huart2); } uint8_t UART_ButtonAdjust(uint8_t *array) { uint8_t answer[4]; HAL_UART_Transmit(&huart2,array,4,1000); HAL_UART_Receive(&huart2,answer,4,2000); if( (answer[0] == array[0]) &&(answer[1] == array[1]) &&(answer[2] == array[2]) &&(answer[3] == array[3])) return 1; else return 0; } void MX_USART2_UART_DeInit(void) { HAL_UART_DeInit(&huart2); } /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/