Mercurial > public > ostc4
view Small_CPU/Src/adc.c @ 423:a560afdaadbf ImprovmentNVM_2
ext_Flash_write_sample erase sector optimization:
The previous function erased a sector while writing sample data causing a delay of up to 200ms. The new implementation checks at the end of a write sample call if we are close to a sector end. In case we are a erase sector command will be send to the flash for the next sector. At the time of the next sample write (2 seconds later) the next sector is already erased and no busy wait of 200ms is needed => max write time for samples is not less than 5ms.
author | ideenmodellierer |
---|---|
date | Mon, 10 Feb 2020 19:40:33 +0100 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file adc.c * @author heinrichs weikamp gmbh * @version V0.0.1 * @date 11-Dec-2014 * @brief ADC for ambient light sensor * @verbatim ============================================================================== ##### How to use ##### ============================================================================== @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" #include "adc.h" /* Exported variables --------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ ADC_HandleTypeDef AdcHandle; __IO uint16_t uhADCxConvertedValue = 0; /* Private types -------------------------------------------------------------*/ #define ADCx ADC1 #define ADCx_CLK_ENABLE() __ADC1_CLK_ENABLE(); #define ADCx_CHANNEL_GPIO_CLK_ENABLE() __GPIOF_CLK_ENABLE() #define ADCx_FORCE_RESET() __ADC_FORCE_RESET() #define ADCx_RELEASE_RESET() __ADC_RELEASE_RESET() /* Definition for ADCx Channel Pin */ #define ADCx_GPIO_PIN GPIO_PIN_0 #define ADCx_GPIO_PORT GPIOB #define ADCx_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() #define ADCx_GPIO_CLK_DISABLE() __GPIOB_CLK_DISABLE() /* Definition for ADCx's Channel */ #define ADCx_CHANNEL ADC_CHANNEL_8 /* Definition for ADCx's NVIC */ //#define ADCx_IRQn ADC_IRQn /* Private function prototypes -----------------------------------------------*/ void ADC_Start_single_IT_Conversion(void); /* Exported functions --------------------------------------------------------*/ uint16_t get_ambient_light_level(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return 800; #endif return uhADCxConvertedValue; } static void ADCx_MspInit(ADC_HandleTypeDef *hadc) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif GPIO_InitTypeDef GPIO_InitStruct; ADCx_GPIO_CLK_ENABLE(); GPIO_InitStruct.Pin = ADCx_GPIO_PIN ; GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(ADCx_GPIO_PORT, &GPIO_InitStruct); ADCx_CLK_ENABLE(); // HAL_NVIC_SetPriority(ADCx_IRQn, 2, 0); // HAL_NVIC_EnableIRQ(ADCx_IRQn); } void ADCx_DeInit(void) { // HAL_ADC_Stop_IT(&AdcHandle); HAL_ADC_DeInit(&AdcHandle); } void ADCx_Init(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif ADC_ChannelConfTypeDef sConfig; AdcHandle.Instance = ADCx; AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV4; AdcHandle.Init.Resolution = ADC_RESOLUTION12b; AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT; AdcHandle.Init.ContinuousConvMode = DISABLE; AdcHandle.Init.DiscontinuousConvMode = DISABLE; AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV; AdcHandle.Init.NbrOfConversion = 1; AdcHandle.Init.DMAContinuousRequests = DISABLE; ADCx_MspInit(&AdcHandle); HAL_ADC_Init(&AdcHandle); sConfig.Channel = ADCx_CHANNEL; sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES; sConfig.Rank = 1; sConfig.Offset = 0; HAL_ADC_ConfigChannel(&AdcHandle, &sConfig); // ADC_Start_single_IT_Conversion(); } uint32_t adc_debug_status = 0; void adc_ambient_light_sensor_get_data(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif HAL_ADC_Start(&AdcHandle); HAL_ADC_PollForConversion(&AdcHandle, 10); adc_debug_status = HAL_ADC_GetState(&AdcHandle); if(adc_debug_status == HAL_ADC_STATE_EOC_REG + HAL_ADC_STATE_READY) // new HAL_ADC_STATE_READY 160613 // if(HAL_ADC_GetState(&AdcHandle) == HAL_ADC_STATE_EOC_REG) uhADCxConvertedValue = HAL_ADC_GetValue(&AdcHandle); HAL_ADC_Stop(&AdcHandle); } /* Private functions ---------------------------------------------------------*/ /* void ADC_Start_single_IT_Conversion(void) { HAL_ADC_Start_IT(&AdcHandle); } void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* AdcHandle) { extern void copyAmbientLightData(void); uhADCxConvertedValue = HAL_ADC_GetValue(AdcHandle); copyAmbientLightData(); ADC_Start_single_IT_Conversion(); } */ /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/