view Small_CPU/Inc/uartProtocol_GNSS.h @ 1063:a3f42192da0f Icon_Integration

Always use polling mode for CO2 operation: In the previous version the CO2 sensor was operated in streaming mode (2 measurements a second) in case it was used stand alone (without multiplexer). This added some complexity to the implementation (setup, error handling etc). To reduce this the sensor will now always be operated in polling mode like it is done for multiplexer operation. To make sure that the correct mode is set a command has been added to the configuration steps.
author Ideenmodellierer
date Wed, 11 Feb 2026 18:35:44 +0100
parents efb7d18cc564
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    uartProtocol_GNSS.h
  * @author  heinrichs weikamp gmbh
  * @version V0.0.1
  * @date    30-Sep-2024
  * @brief	 Interface functionality for operation of gnss devices
  *
  @verbatim
  ==============================================================================
                        ##### How to use #####
  ==============================================================================
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef UART_PROTOCOL_GNSS_H
#define UART_PROTOCOL_GNSS_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "configuration.h"
#include "stm32f4xx_hal.h"

 typedef enum
  {
		UART_GNSS_INIT = 0,		/* Default Status for every sensor type */
		UART_GNSS_IDLE,			/* sensor detected and no communication pending */
		UART_GNSS_ERROR,		/* Error message received from sensor */
		UART_GNSS_WARMUP = 10,
		UART_GNSS_INACTIVE,		/* no requests to the receiver */
		UART_GNSS_LOADCONF_0,
		UART_GNSS_LOADCONF_1,
		UART_GNSS_LOADCONF_2,
		UART_GNSS_SETMODE_MOBILE,
		UART_GNSS_SETDATE_TIME,
		UART_GNSS_SET_POSITION,
		UART_GNSS_PWRDOWN,
		UART_GNSS_PWRUP,
		UART_GNSS_SETCONF,		/* save configuration */
		UART_GNSS_GET_PVT,
		UART_GNSS_GET_SAT
  } uartGnssStatus_t;

  typedef enum
  {
  	GNSSRX_READY = 0,			/* Initial state */
	GNSSRX_DETECT_HEADER_0,
	GNSSRX_DETECT_HEADER_1,
	GNSSRX_DETECT_HEADER_2,
	GNSSRX_DETECT_HEADER_3,
	GNSSRX_DETECT_LENGTH_0,
	GNSSRX_DETECT_LENGTH_1,
	GNSSRX_DETECT_ACK_0,
	GNSSRX_DETECT_ACK_1,
	GNSSRX_DETECT_ACK_2,
	GNSSRX_DETECT_ACK_3,
	GNSSRX_READ_DATA,
	GNSSRX_READ_CK_A,
	GNSSRX_READ_CK_B,
  } receiveStateGnss_t;


  typedef enum
  {
  	GNSSCMD_LOADCONF_0 = 0,
	GNSSCMD_LOADCONF_1,
	GNSSCMD_LOADCONF_2,
	GNSSCMD_SETMOBILE,
	GNSSCMD_SETDATETIME,
	GNSSCMD_SET_POSITION,
	GNSSCMD_MODE_PWS,
	GNSSCMD_MODE_NORMAL,
	GNSSCMD_SET_CONFIG,
	GNSSCMD_GET_NAV_DATA,
	GNSSCMD_GET_PVT_DATA,
	GNSSCMD_GET_POSLLH_DATA,
	GNSSCMD_GET_NAVSAT_DATA
  } gnssSensorCmd_t;

  typedef struct
  {
    uint8_t class;
    uint8_t id;
  } gnssRequest_s;

void uartGnss_ReqPowerDown(uint8_t request);
uint8_t uartGnss_isPowerDownRequested(void);
uartGnssStatus_t uartGnss_GetState(void);
void uartGnss_SetState(uartGnssStatus_t newState);
void uartGnss_Control(void);
void uartGnss_ProcessData(uint8_t data);
uint8_t uartGnss_isSensorConnected();
void uartGnss_SendCmd(uint8_t GnssCmd);

#endif /* UART_PROTOCOL_GNSS_H */