view Small_CPU/Src/i2c.c @ 208:9fc06e1e0f66 ImprovmentSPI

Update SPI error display and handling For easier identification of a communication problem the RX state of Main and RTE is displayed in the debug view. Also error reactions are now handles based on this state. E.g. RTE resets its DMA incase Main reports a data shift which can not be resolved by Main itself In addition the timeout for error detection has been decreased to have a faster reaction
author ideenmodellierer
date Sun, 24 Mar 2019 22:57:28 +0100
parents 7e749084f347
children a9d798e8c11f
line wrap: on
line source

#include "baseCPU2.h"
#include "i2c.h"
#include "scheduler.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/


//  ===============================================================================
//	I2C addresses - see i2c.h
//  ===============================================================================

I2C_HandleTypeDef I2cHandle;


/*
static void I2C_Error_Handler(void)
{
  while(1)
  {
  }
}
*/

HAL_StatusTypeDef I2C1_Status(void)
{
return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


GPIO_PinState HAL_I2C_Read_Data_PIN(void)
{
	return HAL_GPIO_ReadPin(I2Cx_SDA_GPIO_PORT,I2Cx_SDA_PIN);
}

void HAL_I2C_Send_One_CLOCK(void)
{
	HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_RESET);
	HAL_Delay(10);
	HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_SET);
	HAL_Delay(10);
}

GPIO_PinState MX_I2C1_TestAndClear(void)
{
	I2C_DeInit();
	HAL_I2C_ManualControl_MspInit();
	for(int i=0; i<9;i++)
	{
		if(HAL_I2C_Read_Data_PIN() == GPIO_PIN_RESET)
			HAL_I2C_Send_One_CLOCK();
		else
			break;
	}
	return HAL_I2C_Read_Data_PIN();
}

HAL_StatusTypeDef MX_I2C1_Init(void)
{
	I2cHandle.Instance             = I2Cx;
  I2cHandle.Init.AddressingMode  = I2C_ADDRESSINGMODE_7BIT;
  I2cHandle.Init.ClockSpeed      = 100000;//400000; REDUCED for compatibility with  HMC5583L + MMA8452Q
  I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
  I2cHandle.Init.DutyCycle       = I2C_DUTYCYCLE_2;
  I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
  I2cHandle.Init.NoStretchMode   = I2C_NOSTRETCH_DISABLED;
  I2cHandle.Init.OwnAddress1     = 0x01;
  
	global.dataSendToSlaveStopEval = 1;

	global.I2C_SystemStatus = HAL_I2C_Init(&I2cHandle);
	HAL_I2CEx_AnalogFilter_Config(&I2cHandle, I2C_ANALOGFILTER_ENABLED);
	HAL_I2CEx_ConfigDigitalFilter(&I2cHandle,0x0F);



	global.dataSendToSlaveStopEval = 0;
	if(global.dataSendToSlavePending)
	{
		scheduleSpecial_Evaluate_DataSendToSlave();
	}
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


void I2C_DeInit(void)
{
	HAL_I2C_DeInit(&I2cHandle);
}


uint8_t i2c_errors = 0;

void I2C_Error_count(void)
{
	i2c_errors++;
}


HAL_StatusTypeDef I2C_Master_TransmitNoStop(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)global.I2C_SystemStatus;
	
	global.dataSendToSlaveStopEval = 1;
	
  global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress,  pData, Size, 0);
	if(global.I2C_SystemStatus != HAL_OK)
	{
		I2C_Error_count();
	}
	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


HAL_StatusTypeDef I2C_Master_Transmit(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)(global.I2C_SystemStatus & 0x03);

	
	global.dataSendToSlaveStopEval = 1;

	global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress,  pData, Size, 2);
	if(global.I2C_SystemStatus != HAL_OK)
	{
		I2C_Error_count();
	}

	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}
	
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


HAL_StatusTypeDef I2C_Master_Receive(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)global.I2C_SystemStatus;

	uint8_t localHALstatusReturn = 0xFF;

	global.dataSendToSlaveStopEval = 1;

  localHALstatusReturn = HAL_I2C_Master_Receive(&I2cHandle, DevAddress,  pData, Size, 10);
	if(localHALstatusReturn != HAL_OK)
	{
		I2C_Error_count();
	}

	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}

	return (HAL_StatusTypeDef)localHALstatusReturn;
}