Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 208:9fc06e1e0f66 ImprovmentSPI

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Update SPI error display and handling For easier identification of a communication problem the RX state of Main and RTE is displayed in the debug view. Also error reactions are now handles based on this state. E.g. RTE resets its DMA incase Main reports a data shift which can not be resolved by Main itself In addition the timeout for error detection has been decreased to have a faster reaction
author ideenmodellierer
date Sun, 24 Mar 2019 22:57:28 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit