view FontPack/base_upperRegion.c @ 684:9bc817e9e221 Betatest

Ignore automatic setpoint changes during ascend: In the previous version setpoint changes which have been configured for descending were considered for deco calculation in case one or more additional diluents have been activated. This procedure does not fit to the common way to keep setpoint high till end of the dive in order to get rid of the deco time. In the new implementation the OSTC assumes that the current setpoint is used till the end of the dive.
author Ideenmodellierer
date Thu, 02 Jun 2022 20:24:59 +0200
parents 0172431fbad9
children 01f40cb1057e
line wrap: on
line source

///////////////////////////////////////////////////////////////////////////////
/// -*- coding: UTF-8 -*-
///
/// \file   FontPack/./base_upperRegion.c
/// \brief  The beginning of it all. main() is part of this.
/// \author heinrichs weikamp gmbh
/// \date   31-August-2015
///
/// $Id$
///////////////////////////////////////////////////////////////////////////////
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
///
///     This program is free software: you can redistribute it and/or modify
///     it under the terms of the GNU General Public License as published by
///     the Free Software Foundation, either version 3 of the License, or
///     (at your option) any later version.
///
///     This program is distributed in the hope that it will be useful,
///     but WITHOUT ANY WARRANTY; without even the implied warranty of
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
///     GNU General Public License for more details.
///
///     You should have received a copy of the GNU General Public License
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.
//////////////////////////////////////////////////////////////////////////////
/**
	@verbatim
	==============================================================================
							##### New characters in fonts #####
	==============================================================================
	[..] Use font_tmore.c and add line to corresponding font like font_t54c
			 Don't forget to adjust the length of the font in the last line starting
			 const tFont .....

	[..] last char before the big gap, as of 160217
			 image_data_FontT24_0x002b[364]
			 __attribute__((at( START_T24_FONT + (1647 * 28) ))), START_T24_FONT  (0x08142F00 - MINUS_BANK)

			 -> free from 0x0814E490
			 then the logo image_data_ostc_fuer_Tauchcomputer_240px
			 approx 120 kBytes free space available!

	 @endverbatim
	******************************************************************************
	*/

/* Includes ------------------------------------------------------------------*/

// From Common/Inc:
#include "FirmwareData.h"


#ifdef DEBUG
// From AC6 support:
#include <stdio.h>
#include <stdint.h>
#endif

//////////////////////////////////////////////////////////////////////////////

const SFirmwareData font_FirmwareData   __attribute__(( section(".font_firmware_data") )) =
{
		.versionFirst   = 1,
		.versionSecond  = 0,
		.versionThird	= 0,
		.versionBeta	= 0,

		/* 4 bytes, including trailing 0 */
		.signature      = "im",

		.release_year   = 18,
		.release_month  = 10,
		.release_day    = 04,
		.release_sub    = 0,

		/* max 48, including trailing 0 */
		.release_info   ="FontPack extension",

		/* for safety reasons and coming functions */
		.magic[0] = FIRMWARE_MAGIC_FIRST,
		.magic[1] = FIRMWARE_MAGIC_SECOND,
		.magic[2] = FIRMWARE_MAGIC_FONT, /* the magic byte for fonts*/
		.magic[3] = FIRMWARE_MAGIC_END
};

//////////////////////////////////////////////////////////////////////////////

#ifdef BUILD_LIBRARY
/* Fonts fixed in upper region */
#include "Fonts/font_awe48.h"
#include "Fonts/font_T24.h"
#include "Fonts/font_T42.h"
#include "Fonts/font_T48_plus.h"
#include "Fonts/font_T54.h"
#include "Fonts/font_T84.h"
#include "Fonts/font_T105.h"
#include "Fonts/font_T144_plus.h"

#include "Fonts/image_ostc.h"
#else
#include "gfx_fonts.h"
#endif

/* Images fixed in upper region */
#include "Fonts/image_battery.h"
#include "Fonts/image_heinrichs_weikamp.h"

/////////////////////////////////////////////////////////////////////////////


#ifdef DEBUG

#define ASSERT(e) \
		do { if( ! (e) )  {	++errors; printf("FAIL at %3d: %s \n", __LINE__, #e); errorflag = 1;} } while(0)

#define ASSERT_RANGE(e, min, max) ASSERT(min <= e); ASSERT( e <= max)

extern void initialise_monitor_handles(void);

static int errors = 0;
static uint8_t errorflag = 0;

int main(void)
{
#if DEBUG_STLINK_V2
	 initialise_monitor_handles();
#endif
		//---- Check the linker puts the directory at the requested address ------
		ASSERT( & Awe48    == (tFont*)0x81DFE00 );
		ASSERT( & FontT24  == (tFont*)0x81DFE0c );
		ASSERT( & FontT42  == (tFont*)0x81DFE18 );
		ASSERT( & FontT48  == (tFont*)0x81DFE24 );
		ASSERT( & FontT54  == (tFont*)0x81DFE30 );
		ASSERT( & FontT84  == (tFont*)0x81DFE3c );
		ASSERT( & FontT105 == (tFont*)0x81DFE48 );
		ASSERT( & FontT144 == (tFont*)0x81DFE54 );

		//---- Check the linker puts the font data in the requested section ------
		extern tChar __upper_font_data;
		extern tChar __upper_font_data_end;
		ASSERT( &__upper_font_data == (tChar*)0x08132040 );
		ASSERT_RANGE( (int)&__upper_font_data_end, 0x08132040, 0x081E0000);

		//---- Walk through the directory data -----------------------------------
		extern const tFont __font_directory;
		extern const tFont __font_directory_end;

		ASSERT_RANGE(&ImgOSTC,  (tImage*)&__upper_font_data, (tImage*)&__upper_font_data_end);

		for(const tFont* font = & __font_directory; font < &__font_directory_end; ++font)
		{
			printf("Font: %x\n",font);
				// Check END-OF-DIRECTORY magic marker
				if( font->length == (uint32_t)-1 )
				{
						ASSERT( font == &FontT144 + 1 );
						break;
				}

				// Check font descriptors are inside a safe range.
				ASSERT_RANGE( font->length,               10, 150 ); /* old 103: some fonts meanwhile contain more charactes */
				ASSERT_RANGE( font->spacesize,             0,  28 ); /* old 18 : Awe40 has some size 28 characters */
				ASSERT_RANGE( font->spacesize2Monospaced, 13,  72 );
				ASSERT_RANGE( font->height,               28, 108 );

				//---- Walk through each char ----------------------------------------
				for(int i = 0; i < font->length; ++i)
				{
						const tChar* c = &font->chars[i];

						// Check char data is indeed stored in the actual data section
						ASSERT_RANGE( c, &__upper_font_data, &__upper_font_data_end);

						// Check char data sanity
						ASSERT_RANGE( c->code, 0x0000, 0xF143);

						// Check image sanity
						const tImage* image = c->image;
						ASSERT_RANGE(image,  (tImage*)&__upper_font_data, (tImage*)&__upper_font_data_end);
#if 0 /* common failure: root cause not clear */
						ASSERT_RANGE(image->width, font->spacesize, font->spacesize2Monospaced);
#endif
						ASSERT(image->height == font->height);
						if(errorflag)
						{
							printf("image %x: h=%d fonth=%d\n",image,image->height,font->height);
							errorflag = 0;
						}
						// Uncompress image bytes
						const uint8_t* byte = image->data;
						ASSERT_RANGE(byte,  (uint8_t*)&__upper_font_data, (uint8_t*)&__upper_font_data_end);

						for(int w=0; w <image->width; ++w)
						{
								// Compression: special 0x01 byte at start of column means just skip it.
								if( *byte++ == 0x01 )
										continue;

								int zeros = (byte[-1] == 0x00) ? 1 : 0;
								for(int h = 1; h < image->height; ++h)
								{
										if( *byte == 0x00 )
												++zeros;
#if 0 /* this rule is violated very often but does not seems to have an impact */
										// Other bytes cannot have the 0x01 value...
										ASSERT( *byte++ != 0x01 );
#endif
								}
#if 0 /* just an information, not an error => activate if interested */
								if( zeros == image->height )
										printf("Font[%d] char[%d]: could skip column %d \n",
														&__font_directory - font, i, w);
#endif
						}

#if 0 /* byte usually pints to the next char ==> not sure what the check is about */
						// Check the byte stream do not collide with the next char,
						// or with the first tImage struct of the font.
						if( (i+1) < font->length )
								ASSERT( byte < font->chars[i+1].image->data );
						else
								ASSERT( byte < (uint8_t*)font->chars[0].image );

						// TODO: check image bytes are contiguous between chars.
#endif
				}
		}

		if( errors )
		{
				printf("Font Check: %d errors.\n", errors);
				return -1;
		}

		printf("Font Check: no errors.\n");
		return 0;
}
/*#endif*/
#else
#define ASSERT(e) \
		do { if( ! (e) )  {	++errors; errorflag = 1;} } while(0)

#define ASSERT_RANGE(e, min, max) ASSERT(min <= e); ASSERT( e <= max)

uint16_t errors = 1;
static uint8_t errorflag = 0;
uint16_t CheckFontPosition()
{
	uint16_t retvalue;
	ASSERT( & Awe48    == (tFont*)0x81DFE00 );
	ASSERT( & FontT24  == (tFont*)0x81DFE0c );
	ASSERT( & FontT42  == (tFont*)0x81DFE18 );
	ASSERT( & FontT48  == (tFont*)0x81DFE24 );
	ASSERT( & FontT54  == (tFont*)0x81DFE30 );
	ASSERT( & FontT84  == (tFont*)0x81DFE3c );
	ASSERT( & FontT105 == (tFont*)0x81DFE48 );
	ASSERT( & FontT144 == (tFont*)0x81DFE54 );
	retvalue = errors;
	return retvalue;
}
#endif
/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/