view Small_CPU/Src/i2c.c @ 222:9b4b3decd9ba div-fixes-3

Bugfix: correct presentation error in tissues custom view The green vertical line in the N2/He bars show the inspired partial pressures of the respective gasses. Obviously, the tissue partial pressure is always lower on an initial descent, than the inspired partial pressure of the respective gas. Further, when for a given depth, the inspired partial pressure is equal to the tissue partial pressure, the tissue gets fully saturated, so the bars stop at the green line. For N2, a simple presentation error was present. As the body is always saturated with about 75% of N2 (according to the Buelmann algorithm), the tissue N2 was shifted left for that amount, but the inspired N2 line was not. So, the N2 green vertical line was too far to the right. Corrected this. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Fri, 29 Mar 2019 14:00:43 +0100
parents 7e749084f347
children a9d798e8c11f
line wrap: on
line source

#include "baseCPU2.h"
#include "i2c.h"
#include "scheduler.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/


//  ===============================================================================
//	I2C addresses - see i2c.h
//  ===============================================================================

I2C_HandleTypeDef I2cHandle;


/*
static void I2C_Error_Handler(void)
{
  while(1)
  {
  }
}
*/

HAL_StatusTypeDef I2C1_Status(void)
{
return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


GPIO_PinState HAL_I2C_Read_Data_PIN(void)
{
	return HAL_GPIO_ReadPin(I2Cx_SDA_GPIO_PORT,I2Cx_SDA_PIN);
}

void HAL_I2C_Send_One_CLOCK(void)
{
	HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_RESET);
	HAL_Delay(10);
	HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_SET);
	HAL_Delay(10);
}

GPIO_PinState MX_I2C1_TestAndClear(void)
{
	I2C_DeInit();
	HAL_I2C_ManualControl_MspInit();
	for(int i=0; i<9;i++)
	{
		if(HAL_I2C_Read_Data_PIN() == GPIO_PIN_RESET)
			HAL_I2C_Send_One_CLOCK();
		else
			break;
	}
	return HAL_I2C_Read_Data_PIN();
}

HAL_StatusTypeDef MX_I2C1_Init(void)
{
	I2cHandle.Instance             = I2Cx;
  I2cHandle.Init.AddressingMode  = I2C_ADDRESSINGMODE_7BIT;
  I2cHandle.Init.ClockSpeed      = 100000;//400000; REDUCED for compatibility with  HMC5583L + MMA8452Q
  I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
  I2cHandle.Init.DutyCycle       = I2C_DUTYCYCLE_2;
  I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
  I2cHandle.Init.NoStretchMode   = I2C_NOSTRETCH_DISABLED;
  I2cHandle.Init.OwnAddress1     = 0x01;
  
	global.dataSendToSlaveStopEval = 1;

	global.I2C_SystemStatus = HAL_I2C_Init(&I2cHandle);
	HAL_I2CEx_AnalogFilter_Config(&I2cHandle, I2C_ANALOGFILTER_ENABLED);
	HAL_I2CEx_ConfigDigitalFilter(&I2cHandle,0x0F);



	global.dataSendToSlaveStopEval = 0;
	if(global.dataSendToSlavePending)
	{
		scheduleSpecial_Evaluate_DataSendToSlave();
	}
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


void I2C_DeInit(void)
{
	HAL_I2C_DeInit(&I2cHandle);
}


uint8_t i2c_errors = 0;

void I2C_Error_count(void)
{
	i2c_errors++;
}


HAL_StatusTypeDef I2C_Master_TransmitNoStop(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)global.I2C_SystemStatus;
	
	global.dataSendToSlaveStopEval = 1;
	
  global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress,  pData, Size, 0);
	if(global.I2C_SystemStatus != HAL_OK)
	{
		I2C_Error_count();
	}
	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


HAL_StatusTypeDef I2C_Master_Transmit(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)(global.I2C_SystemStatus & 0x03);

	
	global.dataSendToSlaveStopEval = 1;

	global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress,  pData, Size, 2);
	if(global.I2C_SystemStatus != HAL_OK)
	{
		I2C_Error_count();
	}

	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}
	
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


HAL_StatusTypeDef I2C_Master_Receive(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)global.I2C_SystemStatus;

	uint8_t localHALstatusReturn = 0xFF;

	global.dataSendToSlaveStopEval = 1;

  localHALstatusReturn = HAL_I2C_Master_Receive(&I2cHandle, DevAddress,  pData, Size, 10);
	if(localHALstatusReturn != HAL_OK)
	{
		I2C_Error_count();
	}

	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}

	return (HAL_StatusTypeDef)localHALstatusReturn;
}