view Small_CPU/Src/batteryGasGauge.c @ 222:9b4b3decd9ba div-fixes-3

Bugfix: correct presentation error in tissues custom view The green vertical line in the N2/He bars show the inspired partial pressures of the respective gasses. Obviously, the tissue partial pressure is always lower on an initial descent, than the inspired partial pressure of the respective gas. Further, when for a given depth, the inspired partial pressure is equal to the tissue partial pressure, the tissue gets fully saturated, so the bars stop at the green line. For N2, a simple presentation error was present. As the body is always saturated with about 75% of N2 (according to the Buelmann algorithm), the tissue N2 was shifted left for that amount, but the inspired N2 line was not. So, the N2 green vertical line was too far to the right. Corrected this. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Fri, 29 Mar 2019 14:00:43 +0100
parents 5f11787b4f42
children f9ba924d188e
line wrap: on
line source

/**
  ******************************************************************************
  * @file    batteryGasGauge.c 
  * @author  heinrichs weikamp gmbh
  * @version V0.0.1
  * @date    09-Dec-2014
  * @brief   LTC2942 Battery Gas Gauge
  *           
  @verbatim                 
  ============================================================================== 
                ##### stm32f4xx_hal_i2c.c modification #####
  ============================================================================== 
	The LTC2942 requires an repeated start condition without stop condition
	for data reception.
	
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */ 
/* Includes ------------------------------------------------------------------*/
#include "batteryGasGauge.h"
#include "baseCPU2.h"
#include "stm32f4xx_hal.h"
#include "i2c.h"

float battery_f_voltage = 0;
float battery_f_charge_percent = 0;

#define BGG_BATTERY_OFFSET          (26123)  //; 65536-(3,35Ah/0,085mAh)
#define BGG_BATTERY_DEVIDER         (394)    //; 3,35Ah/0,085mAh/100 [%]

float get_voltage(void)
{
#ifdef OSTC_ON_DISCOVERY_HARDWARE
	return 3.0f;
#endif

	return battery_f_voltage;
}


float get_charge(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return 100.0f;
	#endif
	
	return battery_f_charge_percent;
}


void init_battery_gas_gauge(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	uint8_t buffer[2];
	buffer[0] = 0x01;
	buffer[1] = 0xF8;// true: F8 = 11111000, wrong/old comment: 11101000
	I2C_Master_Transmit(  DEVICE_BATTERYGAUGE, buffer, 2);
}


void battery_gas_gauge_get_data(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	float battery_f_voltage_local;
	float battery_f_charge_percent_local;
	
	uint8_t bufferReceive[10];
	I2C_Master_Receive(		DEVICE_BATTERYGAUGE, bufferReceive, 10);

	battery_f_voltage_local =  (float)(bufferReceive[8] * 256);
	battery_f_voltage_local += (float)(bufferReceive[9]);
	battery_f_voltage_local *= (float)6 / (float)0xFFFF;

	// max/full: 0.085 mAh * 1 * 65535 = 5570 mAh
	battery_f_charge_percent_local =  (float)(bufferReceive[2] * 256);
	battery_f_charge_percent_local += (float)(bufferReceive[3]);
	battery_f_charge_percent_local -= BGG_BATTERY_OFFSET;
	battery_f_charge_percent_local /= BGG_BATTERY_DEVIDER;
	
	if(battery_f_charge_percent_local < 0)
		battery_f_charge_percent_local = 0;
	
	battery_f_voltage = battery_f_voltage_local;
	battery_f_charge_percent = battery_f_charge_percent_local;
}


void battery_gas_gauge_set_charge_full(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	uint8_t bufferSend[3];
	bufferSend[0] = 0x02;
	bufferSend[1] = 0xFF;
	bufferSend[2] = 0xFF;
	I2C_Master_Transmit(  DEVICE_BATTERYGAUGE, bufferSend, 3);
}


void battery_gas_gauge_set(float percentage)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif

	uint16_t mAhSend;
	
	if(percentage >= 100)
		mAhSend = 0xFFFF;
	else	
		mAhSend = (uint16_t)(percentage * 655.35f);
	
	uint8_t bufferSend[3];
	bufferSend[0] = 0x02;
	bufferSend[1] = (uint8_t)(mAhSend / 256);
	bufferSend[2] = (uint8_t)(mAhSend & 0xFF);
	I2C_Master_Transmit(  DEVICE_BATTERYGAUGE, bufferSend, 3);
}


/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/