Mercurial > public > ostc4
view Small_CPU/Src/batteryGasGauge.c @ 222:9b4b3decd9ba div-fixes-3
Bugfix: correct presentation error in tissues custom view
The green vertical line in the N2/He bars show the inspired partial
pressures of the respective gasses. Obviously, the tissue partial
pressure is always lower on an initial descent, than the inspired partial
pressure of the respective gas. Further, when for a given depth, the
inspired partial pressure is equal to the tissue partial
pressure, the tissue gets fully saturated, so the bars stop at
the green line.
For N2, a simple presentation error was present. As the body is always
saturated with about 75% of N2 (according to the Buelmann algorithm),
the tissue N2 was shifted left for that amount, but the inspired N2 line
was not. So, the N2 green vertical line was too far to the right. Corrected
this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Fri, 29 Mar 2019 14:00:43 +0100 |
parents | 5f11787b4f42 |
children | f9ba924d188e |
line wrap: on
line source
/** ****************************************************************************** * @file batteryGasGauge.c * @author heinrichs weikamp gmbh * @version V0.0.1 * @date 09-Dec-2014 * @brief LTC2942 Battery Gas Gauge * @verbatim ============================================================================== ##### stm32f4xx_hal_i2c.c modification ##### ============================================================================== The LTC2942 requires an repeated start condition without stop condition for data reception. @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "batteryGasGauge.h" #include "baseCPU2.h" #include "stm32f4xx_hal.h" #include "i2c.h" float battery_f_voltage = 0; float battery_f_charge_percent = 0; #define BGG_BATTERY_OFFSET (26123) //; 65536-(3,35Ah/0,085mAh) #define BGG_BATTERY_DEVIDER (394) //; 3,35Ah/0,085mAh/100 [%] float get_voltage(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return 3.0f; #endif return battery_f_voltage; } float get_charge(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return 100.0f; #endif return battery_f_charge_percent; } void init_battery_gas_gauge(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif uint8_t buffer[2]; buffer[0] = 0x01; buffer[1] = 0xF8;// true: F8 = 11111000, wrong/old comment: 11101000 I2C_Master_Transmit( DEVICE_BATTERYGAUGE, buffer, 2); } void battery_gas_gauge_get_data(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif float battery_f_voltage_local; float battery_f_charge_percent_local; uint8_t bufferReceive[10]; I2C_Master_Receive( DEVICE_BATTERYGAUGE, bufferReceive, 10); battery_f_voltage_local = (float)(bufferReceive[8] * 256); battery_f_voltage_local += (float)(bufferReceive[9]); battery_f_voltage_local *= (float)6 / (float)0xFFFF; // max/full: 0.085 mAh * 1 * 65535 = 5570 mAh battery_f_charge_percent_local = (float)(bufferReceive[2] * 256); battery_f_charge_percent_local += (float)(bufferReceive[3]); battery_f_charge_percent_local -= BGG_BATTERY_OFFSET; battery_f_charge_percent_local /= BGG_BATTERY_DEVIDER; if(battery_f_charge_percent_local < 0) battery_f_charge_percent_local = 0; battery_f_voltage = battery_f_voltage_local; battery_f_charge_percent = battery_f_charge_percent_local; } void battery_gas_gauge_set_charge_full(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif uint8_t bufferSend[3]; bufferSend[0] = 0x02; bufferSend[1] = 0xFF; bufferSend[2] = 0xFF; I2C_Master_Transmit( DEVICE_BATTERYGAUGE, bufferSend, 3); } void battery_gas_gauge_set(float percentage) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif uint16_t mAhSend; if(percentage >= 100) mAhSend = 0xFFFF; else mAhSend = (uint16_t)(percentage * 655.35f); uint8_t bufferSend[3]; bufferSend[0] = 0x02; bufferSend[1] = (uint8_t)(mAhSend / 256); bufferSend[2] = (uint8_t)(mAhSend & 0xFF); I2C_Master_Transmit( DEVICE_BATTERYGAUGE, bufferSend, 3); } /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/