view Small_CPU/Inc/scheduler.h @ 222:9b4b3decd9ba div-fixes-3

Bugfix: correct presentation error in tissues custom view The green vertical line in the N2/He bars show the inspired partial pressures of the respective gasses. Obviously, the tissue partial pressure is always lower on an initial descent, than the inspired partial pressure of the respective gas. Further, when for a given depth, the inspired partial pressure is equal to the tissue partial pressure, the tissue gets fully saturated, so the bars stop at the green line. For N2, a simple presentation error was present. As the body is always saturated with about 75% of N2 (according to the Buelmann algorithm), the tissue N2 was shifted left for that amount, but the inspired N2 line was not. So, the N2 green vertical line was too far to the right. Corrected this. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Fri, 29 Mar 2019 14:00:43 +0100
parents e524a824d8f2
children e4207f0aaa4b
line wrap: on
line source

/**
  ******************************************************************************
  * @file    scheduler.h
  * @author  heinrichs weikamp gmbh
  * @version V0.0.5
  * @date    27-March-2014
  * @brief
  *           
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2015 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */ 


#ifndef SCHEDULER_H
#define SCHEDULER_H

#ifdef __cplusplus
 extern "C" {
#endif

	 
/* Includes ------------------------------------------------------------------*/
#include "data_central.h"
#include "data_exchange.h"
#include "settings.h"

/* Types -------------------------------------------------------------*/
#define SENSOR_PRESSURE_ID 0
#define MAX_SENSORS 1
 
#define SPI_SYNC_METHOD_NONE	(0u)
#define SPI_SYNC_METHOD_HARD	(1u)	/* Scheduler shall reset all counters to 0 */
#define SPI_SYNC_METHOD_SOFT	(2u)	/* Scheduler shall reset adjust counters to 100ms SPI data exchange cycle */
#define SPI_SYNC_METHOD_INVALID	(4u)

#define SCHEDULER_TICK_EXE1SEC	(980u) 	/* tick count based on cycle start which is used to trigger functions which */
										/* shall be executed once in a second (20ms before cycle restarts) */

typedef struct
{
	uint8_t mode;
	short conservatism;
	short repetitive_dive; 
	long seconds_since_last_dive;
	long no_fly_time_minutes;
	uint8_t whichGas;
	SGas aktualGas[2];
	float ceiling_from_main_CPU_mbar;
	SLifeData lifeData;
	SVpm vpm;
	SSettings settings;
	SDevice deviceData;
	SDataExchangeSlaveToMasterDeviceData deviceDataSendToMaster; 
	SDataExchangeSlaveToMaster dataSendToMaster; 
	SDataReceiveFromMaster 			dataSendToSlave; 
	_Bool demo_mode;
	uint8_t dataSendToSlaveIsValid;
	uint8_t dataSendToSlavePending;
	uint8_t dataSendToSlaveStopEval;
	uint32_t sync_error_count;
	uint32_t check_sync_not_running;
	uint8_t ButtonResponsiveness[4];
	uint8_t chargerStatus;
	uint8_t	dataSendToSlaveIsNotValidCount;
	uint8_t ButtonPICdata[4];
	uint8_t accidentFlag;
	uint32_t accidentRemainingSeconds;
	uint8_t sensorError[MAX_SENSORS];
	uint8_t I2C_SystemStatus;
} SGlobal;

typedef struct
{
	long seconds_since_last_dive;
	long no_fly_time_minutes;
} SBackup;

typedef struct
{
	uint8_t counterSPIdata100msec;
	uint8_t counterPressure100msec;
	uint8_t counterCompass100msec;
	uint8_t counterAmbientLight100msec;
	uint32_t tick_execute1second;
	uint32_t tickstart;
} SScheduleCtrl;


/* Variables ---------------------------------------------------------*/
extern SGlobal global;


/* Function prototypes -----------------------------------------------*/

void initGlobals(void);

void scheduleSurfaceMode(void);
void scheduleDiveMode(void);
void scheduleSleepMode(void);
void scheduleCompassCalibrationMode(void);
void scheduleTestMode(void);

void scheduleUpdateLifeData(int32_t asynchron_milliseconds_since_last);
void scheduleSpecial_Evaluate_DataSendToSlave(void);
void scheduleUpdateDeviceDataChargerFull(void);
void scheduleUpdateDeviceDataChargerCharging(void);

void Scheduler_Request_sync_with_SPI(uint8_t SyncMethod);
void Scheduler_SyncToSPI(void);

uint8_t scheduleSetButtonResponsiveness(void);

void copyBatteryData(void);

//void scheduleSurfaceMode_test(void);
//void scheduleSleepMode_test(void);

#ifdef __cplusplus
}
#endif

#endif /* SCHEDULER_H */

/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/