view Discovery/Src/demo.c @ 222:9b4b3decd9ba div-fixes-3

Bugfix: correct presentation error in tissues custom view The green vertical line in the N2/He bars show the inspired partial pressures of the respective gasses. Obviously, the tissue partial pressure is always lower on an initial descent, than the inspired partial pressure of the respective gas. Further, when for a given depth, the inspired partial pressure is equal to the tissue partial pressure, the tissue gets fully saturated, so the bars stop at the green line. For N2, a simple presentation error was present. As the body is always saturated with about 75% of N2 (according to the Buelmann algorithm), the tissue N2 was shifted left for that amount, but the inspired N2 line was not. So, the N2 green vertical line was too far to the right. Corrected this. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Fri, 29 Mar 2019 14:00:43 +0100
parents 5f11787b4f42
children
line wrap: on
line source

/**
  ******************************************************************************
	* @copyright	heinrichs weikamp gmbh
  * @file    		demo.c
  * @author  		heinrichs weikamp gmbh
	* @date    		26-Nov-2015
  * @version 		0.1
  * @since	 		26-Nov-2015
  * @brief   		f�r die Messe und die Vitrine
	* @bug
	* @warning
  @verbatim
  ==============================================================================
	

	==============================================================================
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2015 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */

#include "demo.h"
#include "base.h" // for BUTTON_BACK, ...
#include "data_exchange_main.h" // for time_elapsed_ms()
#include "settings.h"
#include "ostc.h"

#ifndef DEMOMODE

/* Exported functions --------------------------------------------------------*/

uint8_t demoGetCommand(void) { return 0; }
uint8_t demoModeActive(void) { return 0; }
void demoSendCommand(uint8_t action) { return; }


#else

/* Private variables with external access ------------------------------------*/

uint8_t demoModeActiveStatus = 1;
uint32_t systickDemoMode;

uint16_t demoModeActual = 0;

#define BUTTON_BACK (BUTTON_BACK_PIN | 0x80)
#define BUTTON_NEXT (BUTTON_NEXT_PIN | 0x80)
#define BUTTON_ENTER (BUTTON_ENTER_PIN | 0x80)

/* Private typedef -----------------------------------------------------------*/

#define MAXCOMMANDS 200

#ifdef SHOWCCRMODE
const uint8_t commandlist[MAXCOMMANDS][3] = 
{
/* Button, deci-seconds to wait */

	// start for both
	{0, 40},
	// start OC, activate CC
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_ENTER, 0}, // Change to CC
	{BUTTON_ENTER, 0}, // Leave Edit
	{BUTTON_BACK, 0}, 	// Cursor
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_BACK, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	// start CC @ 20, set cursor to Sim  Menu
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_BACK, 50},
	{0, 0},
	// re-loop @ 30
	{0, 3},
	// Logbook
	{BUTTON_BACK, 	0},
	{BUTTON_ENTER, 20},
	{BUTTON_NEXT, 	20},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	// surface screen
	{0, 2},
	// menu
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_ENTER, 30},
	{BUTTON_ENTER, 0},
	// simulator
	{0, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	// the end, repeat from start
	{255, 0}
};
#else // OC Mode Demo
const uint8_t commandlist[MAXCOMMANDS][2] = 
{
/* Button, seconds to wait */

	// start for both
	{0, 50}, // wait IS IMPORTANT
	// start CC, activate OC
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_BACK, 0},	// Leave Cursor Mode
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0}, // OC
	{BUTTON_BACK, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	{0, 0},
	// start OC @ line 20
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0},
	{BUTTON_NEXT, 0}, // OC -> SIM
	{BUTTON_BACK, 0}, // Exit Menu
	{0, 0},
	{0, 0},
	{0, 0},
	// re-loop @ 30
	{0, 10},
	// Logbook
	{BUTTON_BACK, 	4},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	10},
	{BUTTON_ENTER, 20},
	{BUTTON_NEXT, 	20},
	{BUTTON_NEXT, 	20},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	5},
	{BUTTON_BACK, 	0}, // Exit Logbook Mode
	// surface screen
	{0, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},

	// menu
	// activate Configure Deco Gas
	{BUTTON_NEXT, 	0}, // Start Menu
	{BUTTON_NEXT, 	2}, // SIM -> OC
	{BUTTON_ENTER, 2},
	{BUTTON_NEXT, 	1},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	// Mix 30 -> 90
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_NEXT, 	0},
	{BUTTON_ENTER, 0},
	// Mix 90 -> 99
	{BUTTON_BACK, 	0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 5},
	// First -> Deco
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 2},
	{BUTTON_ENTER, 10},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	30},
/*
	// OC -> SIM
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	1},
	{BUTTON_ENTER, 10},
*/
	// SYS2 Layout
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_BACK, 	2},
	{BUTTON_BACK, 	10},
	// SYS2 -> SIM
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 10},
	// simulator
	{BUTTON_ENTER, 40}, // Start Simulator
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 90},
	
	{BUTTON_NEXT, 	5}, // Quit
	{BUTTON_NEXT, 	5},
	{BUTTON_ENTER,  5},
	{BUTTON_ENTER, 50},
	// surface screen
	{0, 10},
	// Logbook
	{BUTTON_BACK, 20},
	{BUTTON_ENTER, 20},
	{BUTTON_NEXT, 	20},
	{BUTTON_NEXT, 	20},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	5},
	{BUTTON_BACK, 	0}, // Exit Logbook Mode
	// surface screen
	{0, 10},
	// activate Configure Deco Gas, go to Gas 2
	{BUTTON_NEXT, 	0}, // Start Menu
	{BUTTON_NEXT, 	2}, // SIM -> OC
	{BUTTON_ENTER, 2},
	{BUTTON_NEXT, 	1},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	// Mix Decogas 99 -> EAN30 First
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_BACK, 	0},
	{BUTTON_ENTER, 0},
	{BUTTON_NEXT, 	0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 0},
	{BUTTON_ENTER, 2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 5},
	{BUTTON_ENTER, 5},
	{BUTTON_ENTER, 10}, // Now EAN 30 First
	{BUTTON_BACK, 	0}, // Exit Edit Mode
	{BUTTON_BACK, 	30}, // Exit Cursor Mode
/*
	// OC -> SIM
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	1},
	{BUTTON_ENTER, 10},
*/	
	// SYS2 Layout
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_NEXT, 	2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER,  2},
	{BUTTON_BACK, 	2},
	{BUTTON_BACK, 	10},
	// SYS -> SIM
	{BUTTON_NEXT, 	2},
	{BUTTON_ENTER, 10},
	// simulator
	{BUTTON_ENTER, 40}, // Start Simulator
	{BUTTON_ENTER, 5},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 90},
	{BUTTON_NEXT, 	5}, // Menu?
	{BUTTON_NEXT, 	5}, // Quit?
	{BUTTON_ENTER, 10},
	{BUTTON_ENTER, 50},
	// the end, repeat from start
	{255, 0}
};
#endif


/* Exported functions --------------------------------------------------------*/

uint8_t demoModeActive(void)
{
	return demoModeActiveStatus;
}

uint8_t demoGetCommand(void)
{
	if(!demoModeActiveStatus)
		return 0;
	
	uint32_t milliSecondsSinceLast;
	uint32_t systick_now;


	systick_now = HAL_GetTick();
	milliSecondsSinceLast = time_elapsed_ms(systickDemoMode, systick_now);

	#ifdef SHOWCCRMODE
	if((demoModeActual == 1) && (settingsGetPointer()->dive_mode == DIVEMODE_CCR))
		demoModeActual = 20;
	#else
	if((demoModeActual == 1) && (settingsGetPointer()->dive_mode == DIVEMODE_OC))
		demoModeActual = 20;
	#endif
	
	if(demoModeActual > MAXCOMMANDS - 2)
		demoModeActual = 30;
	

	uint32_t actualDelay = ((commandlist[demoModeActual][1]) * 100) + 15;
	
	if(milliSecondsSinceLast < actualDelay)
		return 0;
	
	systickDemoMode = systick_now;
	
	if(commandlist[demoModeActual][0] == 255)
		demoModeActual = 30;
	else
		demoModeActual++;
	
	return commandlist[demoModeActual][0];
}


void demoSendCommand(uint8_t action)
{
	demoModeActiveStatus = 0;
	
}

void demoConfigureSettings(void)
{
	settingsGetPointer()->gas[1].oxygen_percentage = 21;
	settingsGetPointer()->gas[1].helium_percentage = 0;
	settingsGetPointer()->gas[1].depth_meter = 0;
	settingsGetPointer()->gas[1].note.ub.first = 0;
	settingsGetPointer()->gas[1].note.ub.active = 0;
	settingsGetPointer()->gas[1].note.ub.deco = 0;
	settingsGetPointer()->gas[1].note.ub.travel = 0;

	settingsGetPointer()->gas[2].oxygen_percentage = 30;
	settingsGetPointer()->gas[2].helium_percentage = 0;
	settingsGetPointer()->gas[2].depth_meter = 0;
	settingsGetPointer()->gas[2].note.ub.first = 1;
	settingsGetPointer()->gas[2].note.ub.active = 1;
	settingsGetPointer()->gas[2].note.ub.deco = 0;
	settingsGetPointer()->gas[2].note.ub.travel = 0;
	
	settingsGetPointer()->ButtonResponsiveness[0] = 90;
	settingsGetPointer()->ButtonResponsiveness[1] = 90;
	settingsGetPointer()->ButtonResponsiveness[2] = 90;
	settingsGetPointer()->ButtonResponsiveness[3] = 90;
}

/* Includes ------------------------------------------------------------------*/

/* Private function prototypes -----------------------------------------------*/

/* Private variables with external access ------------------------------------*/

/* Exported functions --------------------------------------------------------*/

/* Private functions ---------------------------------------------------------*/


#endif // DEMO


/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/