Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h @ 222:9b4b3decd9ba div-fixes-3
Bugfix: correct presentation error in tissues custom view
The green vertical line in the N2/He bars show the inspired partial
pressures of the respective gasses. Obviously, the tissue partial
pressure is always lower on an initial descent, than the inspired partial
pressure of the respective gas. Further, when for a given depth, the
inspired partial pressure is equal to the tissue partial
pressure, the tissue gets fully saturated, so the bars stop at
the green line.
For N2, a simple presentation error was present. As the body is always
saturated with about 75% of N2 (according to the Buelmann algorithm),
the tissue N2 was shifted left for that amount, but the inspired N2 line
was not. So, the N2 green vertical line was too far to the right. Corrected
this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Fri, 29 Mar 2019 14:00:43 +0100 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_flash.h * @author MCD Application Team * @brief Header file of FLASH HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_FLASH_H #define __STM32F4xx_HAL_FLASH_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup FLASH * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup FLASH_Exported_Types FLASH Exported Types * @{ */ /** * @brief FLASH Procedure structure definition */ typedef enum { FLASH_PROC_NONE = 0U, FLASH_PROC_SECTERASE, FLASH_PROC_MASSERASE, FLASH_PROC_PROGRAM } FLASH_ProcedureTypeDef; /** * @brief FLASH handle Structure definition */ typedef struct { __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/ __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/ __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/ __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/ __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/ __IO uint32_t Address; /*Internal variable to save address selected for program*/ HAL_LockTypeDef Lock; /* FLASH locking object */ __IO uint32_t ErrorCode; /* FLASH error code */ }FLASH_ProcessTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup FLASH_Exported_Constants FLASH Exported Constants * @{ */ /** @defgroup FLASH_Error_Code FLASH Error Code * @brief FLASH Error Code * @{ */ #define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */ #define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */ #define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */ #define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */ #define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */ #define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */ #define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */ /** * @} */ /** @defgroup FLASH_Type_Program FLASH Type Program * @{ */ #define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */ #define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */ #define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */ #define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */ /** * @} */ /** @defgroup FLASH_Flag_definition FLASH Flag definition * @brief Flag definition * @{ */ #define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ #define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */ #define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ #define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ #define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */ #define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */ #if defined(FLASH_SR_RDERR) #define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */ #endif /* FLASH_SR_RDERR */ #define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ /** * @} */ /** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition * @brief FLASH Interrupt definition * @{ */ #define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ #define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */ /** * @} */ /** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism * @{ */ #define FLASH_PSIZE_BYTE 0x00000000U #define FLASH_PSIZE_HALF_WORD 0x00000100U #define FLASH_PSIZE_WORD 0x00000200U #define FLASH_PSIZE_DOUBLE_WORD 0x00000300U #define CR_PSIZE_MASK 0xFFFFFCFFU /** * @} */ /** @defgroup FLASH_Keys FLASH Keys * @{ */ #define RDP_KEY ((uint16_t)0x00A5) #define FLASH_KEY1 0x45670123U #define FLASH_KEY2 0xCDEF89ABU #define FLASH_OPT_KEY1 0x08192A3BU #define FLASH_OPT_KEY2 0x4C5D6E7FU /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup FLASH_Exported_Macros FLASH Exported Macros * @{ */ /** * @brief Set the FLASH Latency. * @param __LATENCY__ FLASH Latency * The value of this parameter depend on device used within the same series * @retval none */ #define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__)) /** * @brief Get the FLASH Latency. * @retval FLASH Latency * The value of this parameter depend on device used within the same series */ #define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) /** * @brief Enable the FLASH prefetch buffer. * @retval none */ #define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN) /** * @brief Disable the FLASH prefetch buffer. * @retval none */ #define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN)) /** * @brief Enable the FLASH instruction cache. * @retval none */ #define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN) /** * @brief Disable the FLASH instruction cache. * @retval none */ #define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN)) /** * @brief Enable the FLASH data cache. * @retval none */ #define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN) /** * @brief Disable the FLASH data cache. * @retval none */ #define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN)) /** * @brief Resets the FLASH instruction Cache. * @note This function must be used only when the Instruction Cache is disabled. * @retval None */ #define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \ FLASH->ACR &= ~FLASH_ACR_ICRST; \ }while(0U) /** * @brief Resets the FLASH data Cache. * @note This function must be used only when the data Cache is disabled. * @retval None */ #define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \ FLASH->ACR &= ~FLASH_ACR_DCRST; \ }while(0U) /** * @brief Enable the specified FLASH interrupt. * @param __INTERRUPT__ FLASH interrupt * This parameter can be any combination of the following values: * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt * @arg FLASH_IT_ERR: Error Interrupt * @retval none */ #define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) /** * @brief Disable the specified FLASH interrupt. * @param __INTERRUPT__ FLASH interrupt * This parameter can be any combination of the following values: * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt * @arg FLASH_IT_ERR: Error Interrupt * @retval none */ #define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__)) /** * @brief Get the specified FLASH flag status. * @param __FLAG__ specifies the FLASH flags to check. * This parameter can be any combination of the following values: * @arg FLASH_FLAG_EOP : FLASH End of Operation flag * @arg FLASH_FLAG_OPERR : FLASH operation Error flag * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) * @arg FLASH_FLAG_BSY : FLASH Busy flag * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices * @retval The new state of __FLAG__ (SET or RESET). */ #define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))) /** * @brief Clear the specified FLASH flags. * @param __FLAG__ specifies the FLASH flags to clear. * This parameter can be any combination of the following values: * @arg FLASH_FLAG_EOP : FLASH End of Operation flag * @arg FLASH_FLAG_OPERR : FLASH operation Error flag * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices * @retval none */ #define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) /** * @} */ /* Include FLASH HAL Extension module */ #include "stm32f4xx_hal_flash_ex.h" #include "stm32f4xx_hal_flash_ramfunc.h" /* Exported functions --------------------------------------------------------*/ /** @addtogroup FLASH_Exported_Functions * @{ */ /** @addtogroup FLASH_Exported_Functions_Group1 * @{ */ /* Program operation functions ***********************************************/ HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); /* FLASH IRQ handler method */ void HAL_FLASH_IRQHandler(void); /* Callbacks in non blocking modes */ void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); /** * @} */ /** @addtogroup FLASH_Exported_Functions_Group2 * @{ */ /* Peripheral Control functions **********************************************/ HAL_StatusTypeDef HAL_FLASH_Unlock(void); HAL_StatusTypeDef HAL_FLASH_Lock(void); HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); /* Option bytes control */ HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); /** * @} */ /** @addtogroup FLASH_Exported_Functions_Group3 * @{ */ /* Peripheral State functions ************************************************/ uint32_t HAL_FLASH_GetError(void); HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /** @defgroup FLASH_Private_Variables FLASH Private Variables * @{ */ /** * @} */ /* Private constants ---------------------------------------------------------*/ /** @defgroup FLASH_Private_Constants FLASH Private Constants * @{ */ /** * @brief ACR register byte 0 (Bits[7:0]) base address */ #define ACR_BYTE0_ADDRESS 0x40023C00U /** * @brief OPTCR register byte 0 (Bits[7:0]) base address */ #define OPTCR_BYTE0_ADDRESS 0x40023C14U /** * @brief OPTCR register byte 1 (Bits[15:8]) base address */ #define OPTCR_BYTE1_ADDRESS 0x40023C15U /** * @brief OPTCR register byte 2 (Bits[23:16]) base address */ #define OPTCR_BYTE2_ADDRESS 0x40023C16U /** * @brief OPTCR register byte 3 (Bits[31:24]) base address */ #define OPTCR_BYTE3_ADDRESS 0x40023C17U /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup FLASH_Private_Macros FLASH Private Macros * @{ */ /** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters * @{ */ #define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \ ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) /** * @} */ /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @defgroup FLASH_Private_Functions FLASH Private Functions * @{ */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_FLASH_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/