view Documentations/dump-disc.cfg @ 967:9b418e63dbc2
Evo_2_23
Add a 'Reverse' action to the compass heading dive menu.
This allows the compass heading to be reversed for the return leg of the
dive - as a bonus the reversal will be logged, establishing at which
point in the log the dive was turned (mikeller)
author
heinrichsweikamp
date
Wed, 15 Jan 2025 16:38:27 +0100 (4 weeks ago)
parents
01cc5959f199
children
line source
#! openocd -f+ −
# Define the prob used:+ −
source [find interface/stlink-v2.cfg]+ −
set WORKAREASIZE 0x8000+ −
transport select hla_swd+ −
+ −
# Reset options+ −
set ENABLE_LOW_POWER 1+ −
set STOP_WATCHDOG 1+ −
reset_config srst_only srst_nogate connect_assert_srst+ −
+ −
# Seelct the right chip+ −
set CHIPNAME stm32f427IIT6+ −
set CONNECT_UNDER_RESET 1+ −
source [find target/stm32f4x.cfg]+ −
+ −
# Allow to continue execution after a connection:+ −
init_reset run+ −
+ −
puts "Flash banks:"+ −
flash banks+ −
+ −
#puts "Reading FIRMWARE..."+ −
# Requires OpenOCD 0.10.0 / released January 2017 ?+ −
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000+ −
+ −
#puts "Done."+ −
exit+ −