view Documentations/dump-disc.cfg @ 955:9b29995d6619 Evo_2_23

GNSS backup position: In the previous implementation a position had to be provided by the module in order to be stored in the log. This may cause a wrong position entry (default) in the log, for example if signal is lost while preparing for the dive in the water. To avoid this the last received position will be used for ~2 hours => Diver may take the dive side position before starting with the dive preparation. The last known position will be display in the GNSS position search window as well.
author Ideenmodellierer
date Wed, 01 Jan 2025 20:37:17 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit