Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_DRIVER_v120/Inc/stm32f4xx_hal_rcc_ex.h @ 64:98b479d0618f
typo in info menu...
author | heinrichsweikamp |
---|---|
date | Tue, 14 Aug 2018 12:43:58 +0200 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_rcc_ex.h * @author MCD Application Team * @version V1.2.0 * @date 26-December-2014 * @brief Header file of RCC HAL Extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_RCC_EX_H #define __STM32F4xx_HAL_RCC_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup RCCEx * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup RCCEx_Exported_Types RCCEx Exported Types * @{ */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) /** * @brief PLLI2S Clock structure definition */ typedef struct { uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. This parameter must be a number between Min_Data = 192 and Max_Data = 432. This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. This parameter must be a number between Min_Data = 2 and Max_Data = 7. This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock. This parameter must be a number between Min_Data = 2 and Max_Data = 15. This parameter will be used only when PLLI2S is selected as Clock Source SAI */ }RCC_PLLI2SInitTypeDef; /** * @brief PLLSAI Clock structure definition */ typedef struct { uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. This parameter must be a number between Min_Data = 192 and Max_Data = 432. This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock. This parameter must be a number between Min_Data = 2 and Max_Data = 15. This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock This parameter must be a number between Min_Data = 2 and Max_Data = 7. This parameter will be used only when PLLSAI is selected as Clock Source LTDC */ }RCC_PLLSAIInitTypeDef; /** * @brief RCC extended clocks structure definition */ typedef struct { uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. This parameter must be a number between Min_Data = 1 and Max_Data = 32 This parameter will be used only when PLLI2S is selected as Clock Source SAI */ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. This parameter must be a number between Min_Data = 1 and Max_Data = 32 This parameter will be used only when PLLSAI is selected as Clock Source SAI */ uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock. This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. This parameter can be a value of @ref RCC_RTC_Clock_Source */ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection. This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ }RCC_PeriphCLKInitTypeDef; #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) /** * @brief PLLI2S Clock structure definition */ typedef struct { #if defined(STM32F411xE) uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock. This parameter must be a number between Min_Data = 2 and Max_Data = 62 */ #endif /* STM32F411xE */ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. This parameter must be a number between Min_Data = 192 and Max_Data = 432 This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. This parameter must be a number between Min_Data = 2 and Max_Data = 7. This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ }RCC_PLLI2SInitTypeDef; /** * @brief RCC extended clocks structure definition */ typedef struct { uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. This parameter can be a value of @ref RCC_RTC_Clock_Source */ }RCC_PeriphCLKInitTypeDef; #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants * @{ */ /** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection * @{ */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) #define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001) #define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002) #define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004) #define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008) #define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010) #define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020) #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) #define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001) #define RCC_PERIPHCLK_RTC ((uint32_t)0x00000002) #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ /** * @} */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) /** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR * @{ */ #define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000) #define RCC_PLLSAIDIVR_4 ((uint32_t)0x00010000) #define RCC_PLLSAIDIVR_8 ((uint32_t)0x00020000) #define RCC_PLLSAIDIVR_16 ((uint32_t)0x00030000) /** * @} */ /** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source * @{ */ #define RCC_SAIACLKSOURCE_PLLSAI ((uint32_t)0x00000000) #define RCC_SAIACLKSOURCE_PLLI2S ((uint32_t)0x00100000) #define RCC_SAIACLKSOURCE_EXT ((uint32_t)0x00200000) /** * @} */ /** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source * @{ */ #define RCC_SAIBCLKSOURCE_PLLSAI ((uint32_t)0x00000000) #define RCC_SAIBCLKSOURCE_PLLI2S ((uint32_t)0x00400000) #define RCC_SAIBCLKSOURCE_EXT ((uint32_t)0x00800000) /** * @} */ /** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection * @{ */ #define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00) #define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01) /** * @} */ #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #if defined(STM32F411xE) /** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection * @{ */ #define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00) #define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01) /** * @} */ #endif /* STM32F411xE */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros * @{ */ /*----------------------------------- STM32F42xxx/STM32F43xxx----------------------------------*/ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) /** @brief Enables or disables the AHB1 peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #define __HAL_RCC_GPIOI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOIEN)) #define __HAL_RCC_GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN)) #define __HAL_RCC_GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN)) #define __HAL_RCC_GPIOJ_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOJEN)) #define __HAL_RCC_GPIOK_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOKEN)) #define __HAL_RCC_DMA2D_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA2DEN)) #define __HAL_RCC_ETHMAC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACEN)) #define __HAL_RCC_ETHMACTX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACTXEN)) #define __HAL_RCC_ETHMACRX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACRXEN)) #define __HAL_RCC_ETHMACPTP_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACPTPEN)) #define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSEN)) #define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSULPIEN)) #define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) #define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) #define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) #define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN)) #define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN)) #define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN)) #define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) #define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) #define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) #define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) #define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) #define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) /** * @brief Enable ETHERNET clock. */ #define __HAL_RCC_ETH_CLK_ENABLE() do { \ __HAL_RCC_ETHMAC_CLK_ENABLE(); \ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ } while(0) /** * @brief Disable ETHERNET clock. */ #define __HAL_RCC_ETH_CLK_DISABLE() do { \ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ __HAL_RCC_ETHMAC_CLK_DISABLE(); \ } while(0) /** @brief Enable or disable the AHB2 peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #define __HAL_RCC_DCMI_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_DCMIEN)) #define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) #if defined(STM32F437xx)|| defined(STM32F439xx) #define __HAL_RCC_CRYP_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_CRYPEN)) #define __HAL_RCC_HASH_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_HASHEN)) #define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) #define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) #endif /* STM32F437xx || STM32F439xx */ /** @brief Enables or disables the AHB3 peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #define __HAL_RCC_FMC_CLK_ENABLE() (RCC->AHB3ENR |= (RCC_AHB3ENR_FMCEN)) #define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) /** @brief Enable or disable the Low Speed APB (APB1) peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #define __HAL_RCC_TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN)) #define __HAL_RCC_TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN)) #define __HAL_RCC_TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN)) #define __HAL_RCC_TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN)) #define __HAL_RCC_TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN)) #define __HAL_RCC_WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN)) #define __HAL_RCC_USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN)) #define __HAL_RCC_UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN)) #define __HAL_RCC_UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN)) #define __HAL_RCC_CAN1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN1EN)) #define __HAL_RCC_CAN2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN2EN)) #define __HAL_RCC_DAC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN)) #define __HAL_RCC_UART7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART7EN)) #define __HAL_RCC_UART8_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART8EN)) #define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) #define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) #define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) #define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) #define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) #define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) #define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) #define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) #define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) #define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) #define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) #define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) #define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) #define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) /** @brief Enable or disable the High Speed APB (APB2) peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #define __HAL_RCC_TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN)) #define __HAL_RCC_ADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC2EN)) #define __HAL_RCC_ADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC3EN)) #define __HAL_RCC_SPI5_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI5EN)) #define __HAL_RCC_SPI6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI6EN)) #define __HAL_RCC_SAI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SAI1EN)) #define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) #define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) #define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) #define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) #define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN)) #define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) #if defined(STM32F429xx)|| defined(STM32F439xx) #define __HAL_RCC_LTDC_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_LTDCEN)) #define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN)) #endif /* STM32F429xx || STM32F439xx */ /** @brief Force or release AHB1 peripheral reset. */ #define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) #define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) #define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) #define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) #define __HAL_RCC_OTGHS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) #define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST)) #define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST)) #define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST)) #define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) #define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) #define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) #define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) #define __HAL_RCC_OTGHS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) #define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST)) #define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST)) #define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST)) /** @brief Force or release AHB2 peripheral reset. */ #define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) #define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) #if defined(STM32F437xx)|| defined(STM32F439xx) #define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) #define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) #define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) #define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) #endif /* STM32F437xx || STM32F439xx */ /** @brief Force or release AHB3 peripheral reset */ #define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) #define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) /** @brief Force or release APB1 peripheral reset. */ #define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) #define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) #define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) #define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) #define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) #define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) #define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) #define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) #define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) #define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) #define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) #define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) #define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) #define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) #define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) #define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) #define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) #define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) #define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) #define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) #define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) #define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) #define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) #define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) #define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) #define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) /** @brief Force or release APB2 peripheral reset. */ #define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) #define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) #define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST)) #define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) #define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) #define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) #define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST)) #define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) #if defined(STM32F429xx)|| defined(STM32F439xx) #define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST)) #define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST)) #endif /* STM32F429xx|| STM32F439xx */ /** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) #define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) #define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) #define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) #define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) #define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) #define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) #define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) #define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) #define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) #define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN)) #define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN)) #define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN)) #define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN)) #define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) #define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) #define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) #define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) #define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) #define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) #define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) #define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) #define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) #define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) #define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN)) #define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN)) #define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN)) /** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) #define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) #if defined(STM32F437xx)|| defined(STM32F439xx) #define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) #define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) #define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) #define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) #endif /* STM32F437xx || STM32F439xx */ /** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) #define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) /** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) #define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) #define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) #define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) #define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) #define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) #define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) #define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) #define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) #define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) #define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) #define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) #define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) #define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) #define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) #define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) #define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) #define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) #define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) #define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) #define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) #define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) #define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) #define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) #define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) #define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) /** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) #define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) #define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) #define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) #define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN)) #define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) #define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) #define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) #define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) #define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) #define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN)) #define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) #if defined(STM32F429xx)|| defined(STM32F439xx) #define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN)) #define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN)) #endif /* STM32F429xx || STM32F439xx */ #endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ /*---------------------------------------------------------------------------------------------*/ /*----------------------------------- STM32F40xxx/STM32F41xxx----------------------------------*/ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) /** @brief Enables or disables the AHB1 peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #define __HAL_RCC_GPIOI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOIEN)) #define __HAL_RCC_GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN)) #define __HAL_RCC_GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN)) #define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSEN)) #define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSULPIEN)) #define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) #define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) #define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) #define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) #define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) #if defined(STM32F407xx)|| defined(STM32F417xx) /** * @brief Enable ETHERNET clock. */ #define __HAL_RCC_ETHMAC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACEN)) #define __HAL_RCC_ETHMACTX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACTXEN)) #define __HAL_RCC_ETHMACRX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACRXEN)) #define __HAL_RCC_ETHMACPTP_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACPTPEN)) #define __HAL_RCC_ETH_CLK_ENABLE() do { \ __HAL_RCC_ETHMAC_CLK_ENABLE(); \ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ } while(0) /** * @brief Disable ETHERNET clock. */ #define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) #define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) #define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) #define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) #define __HAL_RCC_ETH_CLK_DISABLE() do { \ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ __HAL_RCC_ETHMAC_CLK_DISABLE(); \ } while(0) #endif /* STM32F407xx || STM32F417xx */ /** @brief Enable or disable the AHB2 peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #if defined(STM32F407xx)|| defined(STM32F417xx) #define __HAL_RCC_DCMI_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_DCMIEN)) #define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) #endif /* STM32F407xx || STM32F417xx */ #if defined(STM32F415xx) || defined(STM32F417xx) #define __HAL_RCC_CRYP_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_CRYPEN)) #define __HAL_RCC_HASH_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_HASHEN)) #define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) #define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) #endif /* STM32F415xx || STM32F417xx */ /** @brief Enables or disables the AHB3 peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #define __HAL_RCC_FSMC_CLK_ENABLE() (RCC->AHB3ENR |= (RCC_AHB3ENR_FSMCEN)) #define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) /** @brief Enable or disable the Low Speed APB (APB1) peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #define __HAL_RCC_TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN)) #define __HAL_RCC_TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN)) #define __HAL_RCC_TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN)) #define __HAL_RCC_TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN)) #define __HAL_RCC_TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN)) #define __HAL_RCC_WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN)) #define __HAL_RCC_USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN)) #define __HAL_RCC_UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN)) #define __HAL_RCC_UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN)) #define __HAL_RCC_CAN1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN1EN)) #define __HAL_RCC_CAN2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN2EN)) #define __HAL_RCC_DAC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN)) #define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) #define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) #define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) #define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) #define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) #define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) #define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) #define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) #define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) #define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) #define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) #define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) /** @brief Enable or disable the High Speed APB (APB2) peripheral clock. * @note After reset, the peripheral clock (used for registers read/write access) * is disabled and the application software has to enable this clock before * using it. */ #define __HAL_RCC_TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN)) #define __HAL_RCC_ADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC2EN)) #define __HAL_RCC_ADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC3EN)) #define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) #define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) #define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) /** @brief Force or release AHB1 peripheral reset. */ #define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) #define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) #define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) #define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) #define __HAL_RCC_OTGHS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) #define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) #define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) #define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) #define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) #define __HAL_RCC_OTGHS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) /** @brief Force or release AHB2 peripheral reset. */ #if defined(STM32F407xx)|| defined(STM32F417xx) #define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) #define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) #endif /* STM32F407xx || STM32F417xx */ #if defined(STM32F415xx) || defined(STM32F417xx) #define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) #define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) #define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) #define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) #endif /* STM32F415xx || STM32F417xx */ /** @brief Force or release AHB3 peripheral reset */ #define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) #define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) /** @brief Force or release APB1 peripheral reset. */ #define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) #define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) #define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) #define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) #define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) #define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) #define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) #define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) #define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) #define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) #define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) #define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) #define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) #define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) #define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) #define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) #define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) #define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) #define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) #define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) #define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) #define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) /** @brief Force or release APB2 peripheral reset. */ #define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) #define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) /** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) #define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) #define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) #define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) #define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) #define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) #define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) #define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) #define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) #define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) #define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) #define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) #define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) #define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) #define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) #define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) #define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) #define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) #define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) #define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) /** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #if defined(STM32F407xx)|| defined(STM32F417xx) #define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) #define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) #endif /* STM32F407xx || STM32F417xx */ #if defined(STM32F415xx) || defined(STM32F417xx) #define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) #define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) #define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) #define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) #endif /* STM32F415xx || STM32F417xx */ /** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) #define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) /** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) #define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) #define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) #define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) #define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) #define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) #define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) #define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) #define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) #define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) #define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) #define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) #define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) #define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) #define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) #define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) #define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) #define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) #define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) #define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) #define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) #define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) /** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. * @note Peripheral clock gating in SLEEP mode can be used to further reduce * power consumption. * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. * @note By default, all peripheral clocks are enabled during SLEEP mode. */ #define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) #define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) #define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) #define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) #define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) #define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ /*---------------------------------------------------------------------------------------------*/ /*------------------------------------------ STM32F411xx --------------------------------------*/ #if defined(STM32F411xE) /** @brief Enable or disable the High Speed APB (APB2) peripheral clock. */ #define __HAL_RCC_SPI5_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI5EN)) #define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) /** @brief Force or release APB2 peripheral reset. */ #define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) #define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) /** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. */ #define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) #define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) #endif /* STM32F411xE */ /*---------------------------------------------------------------------------------------------*/ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) /** @brief Macro to configure the Timers clocks prescalers * @note This feature is only available with STM32F429x/439x Devices. * @param __PRESC__ : specifies the Timers clocks prescalers selection * This parameter can be one of the following values: * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is * equal to HPRE if PPREx is corresponding to division by 1 or 2, * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to * division by 4 or more. * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4, * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding * to division by 8 or more. */ #define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__)) #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE */ #if defined(STM32F411xE) /** @brief Macro to configure the PLLI2S clock multiplication and division factors . * @note This macro must be used only when the PLLI2S is disabled. * @note This macro must be used only when the PLLI2S is disabled. * @note PLLI2S clock source is common with the main PLL (configured in * HAL_RCC_ClockConfig() API). * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock * This parameter must be a number between Min_Data = 2 and Max_Data = 63. * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency * of 2 MHz to limit PLLI2S jitter. * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock * This parameter must be a number between Min_Data = 192 and Max_Data = 432. * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. * @param __PLLI2SR__: specifies the division factor for I2S clock * This parameter must be a number between Min_Data = 2 and Max_Data = 7. * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz * on the I2S clock frequency. */ #define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)) | (__PLLI2SM__)) #endif /* STM32F411xE */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) /** @brief Macros to Enable or Disable the PLLISAI. * @note The PLLSAI is only available with STM32F429x/439x Devices. * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes. */ #define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE) #define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE) /** @brief Macro to configure the PLLSAI clock multiplication and division factors. * @note The PLLSAI is only available with STM32F429x/439x Devices. * @note This function must be used only when the PLLSAI is disabled. * @note PLLSAI clock source is common with the main PLL (configured in * RCC_PLLConfig function ) * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock. * This parameter must be a number between Min_Data = 192 and Max_Data = 432. * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. * @param __PLLSAIQ__: specifies the division factor for SAI1 clock * This parameter must be a number between Min_Data = 2 and Max_Data = 15. * @param __PLLSAIR__: specifies the division factor for LTDC clock * This parameter must be a number between Min_Data = 2 and Max_Data = 7. */ #define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) (RCC->PLLSAICFGR = ((__PLLSAIN__) << 6) | ((__PLLSAIQ__) << 24) | ((__PLLSAIR__) << 28)) /** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors. * @note This macro must be used only when the PLLI2S is disabled. * @note PLLI2S clock source is common with the main PLL (configured in * HAL_RCC_ClockConfig() API) * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock. * This parameter must be a number between Min_Data = 192 and Max_Data = 432. * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. * @param __PLLI2SQ__: specifies the division factor for SAI1 clock. * This parameter must be a number between Min_Data = 2 and Max_Data = 15. * @note the PLLI2SQ parameter is only available with STM32F429x/439x Devices * and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro * @param __PLLI2SR__: specifies the division factor for I2S clock * This parameter must be a number between Min_Data = 2 and Max_Data = 7. * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz * on the I2S clock frequency. */ #define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) | ((__PLLI2SQ__) << 24) | ((__PLLI2SR__) << 28)) /** @brief Macro to configure the SAI clock Divider coming from PLLI2S. * @note The SAI peripheral is only available with STM32F429x/439x Devices. * @note This function must be called before enabling the PLLI2S. * @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock . * This parameter must be a number between 1 and 32. * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__ */ #define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1)) /** @brief Macro to configure the SAI clock Divider coming from PLLSAI. * @note The SAI peripheral is only available with STM32F429x/439x Devices. * @note This function must be called before enabling the PLLSAI. * @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock . * This parameter must be a number between Min_Data = 1 and Max_Data = 32. * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__ */ #define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8)) /** @brief Macro to configure the LTDC clock Divider coming from PLLSAI. * * @note The LTDC peripheral is only available with STM32F429x/439x Devices. * @note This function must be called before enabling the PLLSAI. * @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock . * This parameter must be a number between Min_Data = 2 and Max_Data = 16. * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__ */ #define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__))) /** @brief Macro to configure SAI1BlockA clock source selection. * @note The SAI peripheral is only available with STM32F429x/439x Devices. * @note This function must be called before enabling PLLSAI, PLLI2S and * the SAI clock. * @param __SOURCE__: specifies the SAI Block A clock source. * This parameter can be one of the following values: * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used * as SAI1 Block A clock. * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used * as SAI1 Block A clock. * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin * used as SAI1 Block A clock. */ #define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) /** @brief Macro to configure SAI1BlockB clock source selection. * @note The SAI peripheral is only available with STM32F429x/439x Devices. * @note This function must be called before enabling PLLSAI, PLLI2S and * the SAI clock. * @param __SOURCE__: specifies the SAI Block B clock source. * This parameter can be one of the following values: * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used * as SAI1 Block B clock. * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used * as SAI1 Block B clock. * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin * used as SAI1 Block B clock. */ #define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) /** @brief Enable PLLSAI_RDY interrupt. */ #define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE)) /** @brief Disable PLLSAI_RDY interrupt. */ #define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE)) /** @brief Clear the PLLSAI RDY interrupt pending bits. */ #define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF)) /** @brief Check the PLLSAI RDY interrupt has occurred or not. * @retval The new state (TRUE or FALSE). */ #define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE)) /** @brief Check PLLSAI RDY flag is set or not. * @retval The new state (TRUE or FALSE). */ #define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY)) #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup RCCEx_Exported_Functions * @{ */ /** @addtogroup RCCEx_Exported_Functions_Group1 * @{ */ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); #if defined(STM32F411xE) void HAL_RCCEx_SelectLSEMode(uint8_t Mode); #endif /* STM32F411xE */ /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup RCCEx_Private_Constants RCCEx Private Constants * @{ */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) /** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion * @brief RCC registers bit address in the alias region * @{ */ /* --- CR Register ---*/ /* Alias word address of PLLSAION bit */ #define RCC_PLLSAION_BIT_NUMBER 0x1C #define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLSAION_BIT_NUMBER * 4)) /* --- DCKCFGR Register ---*/ /* Alias word address of TIMPRE bit */ #define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8C) #define RCC_TIMPRE_BIT_NUMBER 0x18 #define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (RCC_TIMPRE_BIT_NUMBER * 4)) /** * @} */ #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @addtogroup RCCEx_Private_Macros RCCEx Private Macros * @{ */ /** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters * @{ */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) #define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000002F)) #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) #define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000003)) #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) #define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15)) #define IS_RCC_PLLSAIN_VALUE(VALUE) ((49 <= (VALUE)) && ((VALUE) <= 432)) #define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15)) #define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) #define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32)) #define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32)) #define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\ ((VALUE) == RCC_PLLSAIDIVR_4) ||\ ((VALUE) == RCC_PLLSAIDIVR_8) ||\ ((VALUE) == RCC_PLLSAIDIVR_16)) #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #if defined(STM32F411xE) #define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63) #define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) #endif /* STM32F411xE */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_RCC_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/