Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dsi.c @ 947:96cf6c53c934 Evo_2_23
GNSS sleep mode:
Backup voltage is now enabled during initialization. Power saving interval has been changed to 20 second active in a 60 minutes cycle.
author | Ideenmodellierer |
---|---|
date | Sun, 22 Dec 2024 21:14:41 +0100 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_dsi.c * @author MCD Application Team * @brief DSI HAL module driver. * This file provides firmware functions to manage the following * functionalities of the DSI peripheral: * + Initialization and de-initialization functions * + IO operation functions * + Peripheral Control functions * + Peripheral State and Errors functions ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ #ifdef HAL_DSI_MODULE_ENABLED #if defined(DSI) /** @addtogroup DSI * @{ */ /* Private types -------------------------------------------------------------*/ /* Private defines -----------------------------------------------------------*/ /** @addtogroup DSI_Private_Constants * @{ */ #define DSI_TIMEOUT_VALUE ((uint32_t)1000U) /* 1s */ #define DSI_ERROR_ACK_MASK (DSI_ISR0_AE0 | DSI_ISR0_AE1 | DSI_ISR0_AE2 | DSI_ISR0_AE3 | \ DSI_ISR0_AE4 | DSI_ISR0_AE5 | DSI_ISR0_AE6 | DSI_ISR0_AE7 | \ DSI_ISR0_AE8 | DSI_ISR0_AE9 | DSI_ISR0_AE10 | DSI_ISR0_AE11 | \ DSI_ISR0_AE12 | DSI_ISR0_AE13 | DSI_ISR0_AE14 | DSI_ISR0_AE15) #define DSI_ERROR_PHY_MASK (DSI_ISR0_PE0 | DSI_ISR0_PE1 | DSI_ISR0_PE2 | DSI_ISR0_PE3 | DSI_ISR0_PE4) #define DSI_ERROR_TX_MASK DSI_ISR1_TOHSTX #define DSI_ERROR_RX_MASK DSI_ISR1_TOLPRX #define DSI_ERROR_ECC_MASK (DSI_ISR1_ECCSE | DSI_ISR1_ECCME) #define DSI_ERROR_CRC_MASK DSI_ISR1_CRCE #define DSI_ERROR_PSE_MASK DSI_ISR1_PSE #define DSI_ERROR_EOT_MASK DSI_ISR1_EOTPE #define DSI_ERROR_OVF_MASK DSI_ISR1_LPWRE #define DSI_ERROR_GEN_MASK (DSI_ISR1_GCWRE | DSI_ISR1_GPWRE | DSI_ISR1_GPTXE | DSI_ISR1_GPRDE | DSI_ISR1_GPRXE) /** * @} */ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx, uint32_t ChannelID, uint32_t DataType, uint32_t Data0, uint32_t Data1); /* Private functions ---------------------------------------------------------*/ /** * @brief Generic DSI packet header configuration * @param DSIx Pointer to DSI register base * @param ChannelID Virtual channel ID of the header packet * @param DataType Packet data type of the header packet * This parameter can be any value of : * @ref DSI_SHORT_WRITE_PKT_Data_Type * or @ref DSI_LONG_WRITE_PKT_Data_Type * or @ref DSI_SHORT_READ_PKT_Data_Type * or DSI_MAX_RETURN_PKT_SIZE * @param Data0 Word count LSB * @param Data1 Word count MSB * @retval None */ static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx, uint32_t ChannelID, uint32_t DataType, uint32_t Data0, uint32_t Data1) { /* Update the DSI packet header with new information */ DSIx->GHCR = (DataType | (ChannelID<<6U) | (Data0<<8U) | (Data1<<16U)); } /* Exported functions --------------------------------------------------------*/ /** @addtogroup DSI_Exported_Functions * @{ */ /** @defgroup DSI_Group1 Initialization and Configuration functions * @brief Initialization and Configuration functions * @verbatim =============================================================================== ##### Initialization and Configuration functions ##### =============================================================================== [..] This section provides functions allowing to: (+) Initialize and configure the DSI (+) De-initialize the DSI @endverbatim * @{ */ /** * @brief Initializes the DSI according to the specified * parameters in the DSI_InitTypeDef and create the associated handle. * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param PLLInit pointer to a DSI_PLLInitTypeDef structure that contains * the PLL Clock structure definition for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_Init(DSI_HandleTypeDef *hdsi, DSI_PLLInitTypeDef *PLLInit) { uint32_t tickstart; uint32_t unitIntervalx4; uint32_t tempIDF; /* Check the DSI handle allocation */ if(hdsi == NULL) { return HAL_ERROR; } /* Check function parameters */ assert_param(IS_DSI_PLL_NDIV(PLLInit->PLLNDIV)); assert_param(IS_DSI_PLL_IDF(PLLInit->PLLIDF)); assert_param(IS_DSI_PLL_ODF(PLLInit->PLLODF)); assert_param(IS_DSI_AUTO_CLKLANE_CONTROL(hdsi->Init.AutomaticClockLaneControl)); assert_param(IS_DSI_NUMBER_OF_LANES(hdsi->Init.NumberOfLanes)); if(hdsi->State == HAL_DSI_STATE_RESET) { /* Initialize the low level hardware */ HAL_DSI_MspInit(hdsi); } /* Change DSI peripheral state */ hdsi->State = HAL_DSI_STATE_BUSY; /**************** Turn on the regulator and enable the DSI PLL ****************/ /* Enable the regulator */ __HAL_DSI_REG_ENABLE(hdsi); /* Get tick */ tickstart = HAL_GetTick(); /* Wait until the regulator is ready */ while(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_RRS) == RESET) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { return HAL_TIMEOUT; } } /* Set the PLL division factors */ hdsi->Instance->WRPCR &= ~(DSI_WRPCR_PLL_NDIV | DSI_WRPCR_PLL_IDF | DSI_WRPCR_PLL_ODF); hdsi->Instance->WRPCR |= (((PLLInit->PLLNDIV)<<2U) | ((PLLInit->PLLIDF)<<11U) | ((PLLInit->PLLODF)<<16U)); /* Enable the DSI PLL */ __HAL_DSI_PLL_ENABLE(hdsi); /* Get tick */ tickstart = HAL_GetTick(); /* Wait for the lock of the PLL */ while(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == RESET) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { return HAL_TIMEOUT; } } /*************************** Set the PHY parameters ***************************/ /* D-PHY clock and digital enable*/ hdsi->Instance->PCTLR |= (DSI_PCTLR_CKE | DSI_PCTLR_DEN); /* Clock lane configuration */ hdsi->Instance->CLCR &= ~(DSI_CLCR_DPCC | DSI_CLCR_ACR); hdsi->Instance->CLCR |= (DSI_CLCR_DPCC | hdsi->Init.AutomaticClockLaneControl); /* Configure the number of active data lanes */ hdsi->Instance->PCONFR &= ~DSI_PCONFR_NL; hdsi->Instance->PCONFR |= hdsi->Init.NumberOfLanes; /************************ Set the DSI clock parameters ************************/ /* Set the TX escape clock division factor */ hdsi->Instance->CCR &= ~DSI_CCR_TXECKDIV; hdsi->Instance->CCR |= hdsi->Init.TXEscapeCkdiv; /* Calculate the bit period in high-speed mode in unit of 0.25 ns (UIX4) */ /* The equation is : UIX4 = IntegerPart( (1000/F_PHY_Mhz) * 4 ) */ /* Where : F_PHY_Mhz = (NDIV * HSE_Mhz) / (IDF * ODF) */ tempIDF = (PLLInit->PLLIDF > 0U) ? PLLInit->PLLIDF : 1U; unitIntervalx4 = (4000000U * tempIDF * (1U << PLLInit->PLLODF)) / ((HSE_VALUE/1000U) * PLLInit->PLLNDIV); /* Set the bit period in high-speed mode */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_UIX4; hdsi->Instance->WPCR[0U] |= unitIntervalx4; /****************************** Error management *****************************/ /* Disable all error interrupts and reset the Error Mask */ hdsi->Instance->IER[0U] = 0U; hdsi->Instance->IER[1U] = 0U; hdsi->ErrorMsk = 0U; /* Initialise the error code */ hdsi->ErrorCode = HAL_DSI_ERROR_NONE; /* Initialize the DSI state*/ hdsi->State = HAL_DSI_STATE_READY; return HAL_OK; } /** * @brief De-initializes the DSI peripheral registers to their default reset * values. * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_DeInit(DSI_HandleTypeDef *hdsi) { /* Check the DSI handle allocation */ if(hdsi == NULL) { return HAL_ERROR; } /* Change DSI peripheral state */ hdsi->State = HAL_DSI_STATE_BUSY; /* Disable the DSI wrapper */ __HAL_DSI_WRAPPER_DISABLE(hdsi); /* Disable the DSI host */ __HAL_DSI_DISABLE(hdsi); /* D-PHY clock and digital disable */ hdsi->Instance->PCTLR &= ~(DSI_PCTLR_CKE | DSI_PCTLR_DEN); /* Turn off the DSI PLL */ __HAL_DSI_PLL_DISABLE(hdsi); /* Disable the regulator */ __HAL_DSI_REG_DISABLE(hdsi); /* DeInit the low level hardware */ HAL_DSI_MspDeInit(hdsi); /* Initialise the error code */ hdsi->ErrorCode = HAL_DSI_ERROR_NONE; /* Initialize the DSI state*/ hdsi->State = HAL_DSI_STATE_RESET; /* Release Lock */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Enable the error monitor flags * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param ActiveErrors indicates which error interrupts will be enabled. * This parameter can be any combination of @ref DSI_Error_Data_Type. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ConfigErrorMonitor(DSI_HandleTypeDef *hdsi, uint32_t ActiveErrors) { /* Process locked */ __HAL_LOCK(hdsi); hdsi->Instance->IER[0U] = 0U; hdsi->Instance->IER[1U] = 0U; /* Store active errors to the handle */ hdsi->ErrorMsk = ActiveErrors; if((ActiveErrors & HAL_DSI_ERROR_ACK) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[0U] |= DSI_ERROR_ACK_MASK; } if((ActiveErrors & HAL_DSI_ERROR_PHY) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[0U] |= DSI_ERROR_PHY_MASK; } if((ActiveErrors & HAL_DSI_ERROR_TX) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[1U] |= DSI_ERROR_TX_MASK; } if((ActiveErrors & HAL_DSI_ERROR_RX) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[1U] |= DSI_ERROR_RX_MASK; } if((ActiveErrors & HAL_DSI_ERROR_ECC) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[1U] |= DSI_ERROR_ECC_MASK; } if((ActiveErrors & HAL_DSI_ERROR_CRC) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[1U] |= DSI_ERROR_CRC_MASK; } if((ActiveErrors & HAL_DSI_ERROR_PSE) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[1U] |= DSI_ERROR_PSE_MASK; } if((ActiveErrors & HAL_DSI_ERROR_EOT) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[1U] |= DSI_ERROR_EOT_MASK; } if((ActiveErrors & HAL_DSI_ERROR_OVF) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[1U] |= DSI_ERROR_OVF_MASK; } if((ActiveErrors & HAL_DSI_ERROR_GEN) != RESET) { /* Enable the interrupt generation on selected errors */ hdsi->Instance->IER[1U] |= DSI_ERROR_GEN_MASK; } /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Initializes the DSI MSP. * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval None */ __weak void HAL_DSI_MspInit(DSI_HandleTypeDef* hdsi) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdsi); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_DSI_MspInit could be implemented in the user file */ } /** * @brief De-initializes the DSI MSP. * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval None */ __weak void HAL_DSI_MspDeInit(DSI_HandleTypeDef* hdsi) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdsi); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_DSI_MspDeInit could be implemented in the user file */ } /** * @} */ /** @defgroup DSI_Group2 IO operation functions * @brief IO operation functions * @verbatim =============================================================================== ##### IO operation functions ##### =============================================================================== [..] This section provides function allowing to: (+) Handle DSI interrupt request @endverbatim * @{ */ /** * @brief Handles DSI interrupt request. * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ void HAL_DSI_IRQHandler(DSI_HandleTypeDef *hdsi) { uint32_t ErrorStatus0, ErrorStatus1; /* Tearing Effect Interrupt management ***************************************/ if(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_TE) != RESET) { if(__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_TE) != RESET) { /* Clear the Tearing Effect Interrupt Flag */ __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_TE); /* Tearing Effect Callback */ HAL_DSI_TearingEffectCallback(hdsi); } } /* End of Refresh Interrupt management ***************************************/ if(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_ER) != RESET) { if(__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_ER) != RESET) { /* Clear the End of Refresh Interrupt Flag */ __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_ER); /* End of Refresh Callback */ HAL_DSI_EndOfRefreshCallback(hdsi); } } /* Error Interrupts management ***********************************************/ if(hdsi->ErrorMsk != 0U) { ErrorStatus0 = hdsi->Instance->ISR[0U]; ErrorStatus0 &= hdsi->Instance->IER[0U]; ErrorStatus1 = hdsi->Instance->ISR[1U]; ErrorStatus1 &= hdsi->Instance->IER[1U]; if((ErrorStatus0 & DSI_ERROR_ACK_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_ACK; } if((ErrorStatus0 & DSI_ERROR_PHY_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_PHY; } if((ErrorStatus1 & DSI_ERROR_TX_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_TX; } if((ErrorStatus1 & DSI_ERROR_RX_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_RX; } if((ErrorStatus1 & DSI_ERROR_ECC_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_ECC; } if((ErrorStatus1 & DSI_ERROR_CRC_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_CRC; } if((ErrorStatus1 & DSI_ERROR_PSE_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_PSE; } if((ErrorStatus1 & DSI_ERROR_EOT_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_EOT; } if((ErrorStatus1 & DSI_ERROR_OVF_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_OVF; } if((ErrorStatus1 & DSI_ERROR_GEN_MASK) != RESET) { hdsi->ErrorCode |= HAL_DSI_ERROR_GEN; } /* Check only selected errors */ if(hdsi->ErrorCode != HAL_DSI_ERROR_NONE) { /* DSI error interrupt user callback */ HAL_DSI_ErrorCallback(hdsi); } } } /** * @brief Tearing Effect DSI callback. * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval None */ __weak void HAL_DSI_TearingEffectCallback(DSI_HandleTypeDef *hdsi) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdsi); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_DSI_TearingEffectCallback could be implemented in the user file */ } /** * @brief End of Refresh DSI callback. * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval None */ __weak void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdsi); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_DSI_EndOfRefreshCallback could be implemented in the user file */ } /** * @brief Operation Error DSI callback. * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval None */ __weak void HAL_DSI_ErrorCallback(DSI_HandleTypeDef *hdsi) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdsi); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_DSI_ErrorCallback could be implemented in the user file */ } /** * @} */ /** @defgroup DSI_Group3 Peripheral Control functions * @brief Peripheral Control functions * @verbatim =============================================================================== ##### Peripheral Control functions ##### =============================================================================== [..] This section provides functions allowing to: (+) Configure the Generic interface read-back Virtual Channel ID (+) Select video mode and configure the corresponding parameters (+) Configure command transmission mode: High-speed or Low-power (+) Configure the flow control (+) Configure the DSI PHY timer (+) Configure the DSI HOST timeout (+) Configure the DSI HOST timeout (+) Start/Stop the DSI module (+) Refresh the display in command mode (+) Controls the display color mode in Video mode (+) Control the display shutdown in Video mode (+) write short DCS or short Generic command (+) write long DCS or long Generic command (+) Read command (DCS or generic) (+) Enter/Exit the Ultra Low Power Mode on data only (D-PHY PLL running) (+) Enter/Exit the Ultra Low Power Mode on data only and clock (D-PHY PLL turned off) (+) Start/Stop test pattern generation (+) Slew-Rate And Delay Tuning (+) Low-Power Reception Filter Tuning (+) Activate an additional current path on all lanes to meet the SDDTx parameter (+) Custom lane pins configuration (+) Set custom timing for the PHY (+) Force the Clock/Data Lane in TX Stop Mode (+) Force LP Receiver in Low-Power Mode (+) Force Data Lanes in RX Mode after a BTA (+) Enable a pull-down on the lanes to prevent from floating states when unused (+) Switch off the contention detection on data lanes @endverbatim * @{ */ /** * @brief Configure the Generic interface read-back Virtual Channel ID. * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param VirtualChannelID Virtual channel ID * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_SetGenericVCID(DSI_HandleTypeDef *hdsi, uint32_t VirtualChannelID) { /* Process locked */ __HAL_LOCK(hdsi); /* Update the GVCID register */ hdsi->Instance->GVCIDR &= ~DSI_GVCIDR_VCID; hdsi->Instance->GVCIDR |= VirtualChannelID; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Select video mode and configure the corresponding parameters * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param VidCfg pointer to a DSI_VidCfgTypeDef structure that contains * the DSI video mode configuration parameters * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ConfigVideoMode(DSI_HandleTypeDef *hdsi, DSI_VidCfgTypeDef *VidCfg) { /* Process locked */ __HAL_LOCK(hdsi); /* Check the parameters */ assert_param(IS_DSI_COLOR_CODING(VidCfg->ColorCoding)); assert_param(IS_DSI_VIDEO_MODE_TYPE(VidCfg->Mode)); assert_param(IS_DSI_LP_COMMAND(VidCfg->LPCommandEnable)); assert_param(IS_DSI_LP_HFP(VidCfg->LPHorizontalFrontPorchEnable)); assert_param(IS_DSI_LP_HBP(VidCfg->LPHorizontalBackPorchEnable)); assert_param(IS_DSI_LP_VACTIVE(VidCfg->LPVerticalActiveEnable)); assert_param(IS_DSI_LP_VFP(VidCfg->LPVerticalFrontPorchEnable)); assert_param(IS_DSI_LP_VBP(VidCfg->LPVerticalBackPorchEnable)); assert_param(IS_DSI_LP_VSYNC(VidCfg->LPVerticalSyncActiveEnable)); assert_param(IS_DSI_FBTAA(VidCfg->FrameBTAAcknowledgeEnable)); assert_param(IS_DSI_DE_POLARITY(VidCfg->DEPolarity)); assert_param(IS_DSI_VSYNC_POLARITY(VidCfg->VSPolarity)); assert_param(IS_DSI_HSYNC_POLARITY(VidCfg->HSPolarity)); /* Check the LooselyPacked variant only in 18-bit mode */ if(VidCfg->ColorCoding == DSI_RGB666) { assert_param(IS_DSI_LOOSELY_PACKED(VidCfg->LooselyPacked)); } /* Select video mode by resetting CMDM and DSIM bits */ hdsi->Instance->MCR &= ~DSI_MCR_CMDM; hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM; /* Configure the video mode transmission type */ hdsi->Instance->VMCR &= ~DSI_VMCR_VMT; hdsi->Instance->VMCR |= VidCfg->Mode; /* Configure the video packet size */ hdsi->Instance->VPCR &= ~DSI_VPCR_VPSIZE; hdsi->Instance->VPCR |= VidCfg->PacketSize; /* Set the chunks number to be transmitted through the DSI link */ hdsi->Instance->VCCR &= ~DSI_VCCR_NUMC; hdsi->Instance->VCCR |= VidCfg->NumberOfChunks; /* Set the size of the null packet */ hdsi->Instance->VNPCR &= ~DSI_VNPCR_NPSIZE; hdsi->Instance->VNPCR |= VidCfg->NullPacketSize; /* Select the virtual channel for the LTDC interface traffic */ hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID; hdsi->Instance->LVCIDR |= VidCfg->VirtualChannelID; /* Configure the polarity of control signals */ hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP); hdsi->Instance->LPCR |= (VidCfg->DEPolarity | VidCfg->VSPolarity | VidCfg->HSPolarity); /* Select the color coding for the host */ hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC; hdsi->Instance->LCOLCR |= VidCfg->ColorCoding; /* Select the color coding for the wrapper */ hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX; hdsi->Instance->WCFGR |= ((VidCfg->ColorCoding)<<1U); /* Enable/disable the loosely packed variant to 18-bit configuration */ if(VidCfg->ColorCoding == DSI_RGB666) { hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_LPE; hdsi->Instance->LCOLCR |= VidCfg->LooselyPacked; } /* Set the Horizontal Synchronization Active (HSA) in lane byte clock cycles */ hdsi->Instance->VHSACR &= ~DSI_VHSACR_HSA; hdsi->Instance->VHSACR |= VidCfg->HorizontalSyncActive; /* Set the Horizontal Back Porch (HBP) in lane byte clock cycles */ hdsi->Instance->VHBPCR &= ~DSI_VHBPCR_HBP; hdsi->Instance->VHBPCR |= VidCfg->HorizontalBackPorch; /* Set the total line time (HLINE=HSA+HBP+HACT+HFP) in lane byte clock cycles */ hdsi->Instance->VLCR &= ~DSI_VLCR_HLINE; hdsi->Instance->VLCR |= VidCfg->HorizontalLine; /* Set the Vertical Synchronization Active (VSA) */ hdsi->Instance->VVSACR &= ~DSI_VVSACR_VSA; hdsi->Instance->VVSACR |= VidCfg->VerticalSyncActive; /* Set the Vertical Back Porch (VBP)*/ hdsi->Instance->VVBPCR &= ~DSI_VVBPCR_VBP; hdsi->Instance->VVBPCR |= VidCfg->VerticalBackPorch; /* Set the Vertical Front Porch (VFP)*/ hdsi->Instance->VVFPCR &= ~DSI_VVFPCR_VFP; hdsi->Instance->VVFPCR |= VidCfg->VerticalFrontPorch; /* Set the Vertical Active period*/ hdsi->Instance->VVACR &= ~DSI_VVACR_VA; hdsi->Instance->VVACR |= VidCfg->VerticalActive; /* Configure the command transmission mode */ hdsi->Instance->VMCR &= ~DSI_VMCR_LPCE; hdsi->Instance->VMCR |= VidCfg->LPCommandEnable; /* Low power largest packet size */ hdsi->Instance->LPMCR &= ~DSI_LPMCR_LPSIZE; hdsi->Instance->LPMCR |= ((VidCfg->LPLargestPacketSize)<<16U); /* Low power VACT largest packet size */ hdsi->Instance->LPMCR &= ~DSI_LPMCR_VLPSIZE; hdsi->Instance->LPMCR |= VidCfg->LPVACTLargestPacketSize; /* Enable LP transition in HFP period */ hdsi->Instance->VMCR &= ~DSI_VMCR_LPHFPE; hdsi->Instance->VMCR |= VidCfg->LPHorizontalFrontPorchEnable; /* Enable LP transition in HBP period */ hdsi->Instance->VMCR &= ~DSI_VMCR_LPHBPE; hdsi->Instance->VMCR |= VidCfg->LPHorizontalBackPorchEnable; /* Enable LP transition in VACT period */ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVAE; hdsi->Instance->VMCR |= VidCfg->LPVerticalActiveEnable; /* Enable LP transition in VFP period */ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVFPE; hdsi->Instance->VMCR |= VidCfg->LPVerticalFrontPorchEnable; /* Enable LP transition in VBP period */ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVBPE; hdsi->Instance->VMCR |= VidCfg->LPVerticalBackPorchEnable; /* Enable LP transition in vertical sync period */ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVSAE; hdsi->Instance->VMCR |= VidCfg->LPVerticalSyncActiveEnable; /* Enable the request for an acknowledge response at the end of a frame */ hdsi->Instance->VMCR &= ~DSI_VMCR_FBTAAE; hdsi->Instance->VMCR |= VidCfg->FrameBTAAcknowledgeEnable; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Select adapted command mode and configure the corresponding parameters * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param CmdCfg pointer to a DSI_CmdCfgTypeDef structure that contains * the DSI command mode configuration parameters * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ConfigAdaptedCommandMode(DSI_HandleTypeDef *hdsi, DSI_CmdCfgTypeDef *CmdCfg) { /* Process locked */ __HAL_LOCK(hdsi); /* Check the parameters */ assert_param(IS_DSI_COLOR_CODING(CmdCfg->ColorCoding)); assert_param(IS_DSI_TE_SOURCE(CmdCfg->TearingEffectSource)); assert_param(IS_DSI_TE_POLARITY(CmdCfg->TearingEffectPolarity)); assert_param(IS_DSI_AUTOMATIC_REFRESH(CmdCfg->AutomaticRefresh)); assert_param(IS_DSI_VS_POLARITY(CmdCfg->VSyncPol)); assert_param(IS_DSI_TE_ACK_REQUEST(CmdCfg->TEAcknowledgeRequest)); assert_param(IS_DSI_DE_POLARITY(CmdCfg->DEPolarity)); assert_param(IS_DSI_VSYNC_POLARITY(CmdCfg->VSPolarity)); assert_param(IS_DSI_HSYNC_POLARITY(CmdCfg->HSPolarity)); /* Select command mode by setting CMDM and DSIM bits */ hdsi->Instance->MCR |= DSI_MCR_CMDM; hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM; hdsi->Instance->WCFGR |= DSI_WCFGR_DSIM; /* Select the virtual channel for the LTDC interface traffic */ hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID; hdsi->Instance->LVCIDR |= CmdCfg->VirtualChannelID; /* Configure the polarity of control signals */ hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP); hdsi->Instance->LPCR |= (CmdCfg->DEPolarity | CmdCfg->VSPolarity | CmdCfg->HSPolarity); /* Select the color coding for the host */ hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC; hdsi->Instance->LCOLCR |= CmdCfg->ColorCoding; /* Select the color coding for the wrapper */ hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX; hdsi->Instance->WCFGR |= ((CmdCfg->ColorCoding)<<1U); /* Configure the maximum allowed size for write memory command */ hdsi->Instance->LCCR &= ~DSI_LCCR_CMDSIZE; hdsi->Instance->LCCR |= CmdCfg->CommandSize; /* Configure the tearing effect source and polarity and select the refresh mode */ hdsi->Instance->WCFGR &= ~(DSI_WCFGR_TESRC | DSI_WCFGR_TEPOL | DSI_WCFGR_AR | DSI_WCFGR_VSPOL); hdsi->Instance->WCFGR |= (CmdCfg->TearingEffectSource | CmdCfg->TearingEffectPolarity | CmdCfg->AutomaticRefresh | CmdCfg->VSyncPol); /* Configure the tearing effect acknowledge request */ hdsi->Instance->CMCR &= ~DSI_CMCR_TEARE; hdsi->Instance->CMCR |= CmdCfg->TEAcknowledgeRequest; /* Enable the Tearing Effect interrupt */ __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_TE); /* Enable the End of Refresh interrupt */ __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_ER); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Configure command transmission mode: High-speed or Low-power * and enable/disable acknowledge request after packet transmission * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param LPCmd pointer to a DSI_LPCmdTypeDef structure that contains * the DSI command transmission mode configuration parameters * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ConfigCommand(DSI_HandleTypeDef *hdsi, DSI_LPCmdTypeDef *LPCmd) { /* Process locked */ __HAL_LOCK(hdsi); assert_param(IS_DSI_LP_GSW0P(LPCmd->LPGenShortWriteNoP)); assert_param(IS_DSI_LP_GSW1P(LPCmd->LPGenShortWriteOneP)); assert_param(IS_DSI_LP_GSW2P(LPCmd->LPGenShortWriteTwoP)); assert_param(IS_DSI_LP_GSR0P(LPCmd->LPGenShortReadNoP)); assert_param(IS_DSI_LP_GSR1P(LPCmd->LPGenShortReadOneP)); assert_param(IS_DSI_LP_GSR2P(LPCmd->LPGenShortReadTwoP)); assert_param(IS_DSI_LP_GLW(LPCmd->LPGenLongWrite)); assert_param(IS_DSI_LP_DSW0P(LPCmd->LPDcsShortWriteNoP)); assert_param(IS_DSI_LP_DSW1P(LPCmd->LPDcsShortWriteOneP)); assert_param(IS_DSI_LP_DSR0P(LPCmd->LPDcsShortReadNoP)); assert_param(IS_DSI_LP_DLW(LPCmd->LPDcsLongWrite)); assert_param(IS_DSI_LP_MRDP(LPCmd->LPMaxReadPacket)); assert_param(IS_DSI_ACK_REQUEST(LPCmd->AcknowledgeRequest)); /* Select High-speed or Low-power for command transmission */ hdsi->Instance->CMCR &= ~(DSI_CMCR_GSW0TX |\ DSI_CMCR_GSW1TX |\ DSI_CMCR_GSW2TX |\ DSI_CMCR_GSR0TX |\ DSI_CMCR_GSR1TX |\ DSI_CMCR_GSR2TX |\ DSI_CMCR_GLWTX |\ DSI_CMCR_DSW0TX |\ DSI_CMCR_DSW1TX |\ DSI_CMCR_DSR0TX |\ DSI_CMCR_DLWTX |\ DSI_CMCR_MRDPS); hdsi->Instance->CMCR |= (LPCmd->LPGenShortWriteNoP |\ LPCmd->LPGenShortWriteOneP |\ LPCmd->LPGenShortWriteTwoP |\ LPCmd->LPGenShortReadNoP |\ LPCmd->LPGenShortReadOneP |\ LPCmd->LPGenShortReadTwoP |\ LPCmd->LPGenLongWrite |\ LPCmd->LPDcsShortWriteNoP |\ LPCmd->LPDcsShortWriteOneP |\ LPCmd->LPDcsShortReadNoP |\ LPCmd->LPDcsLongWrite |\ LPCmd->LPMaxReadPacket); /* Configure the acknowledge request after each packet transmission */ hdsi->Instance->CMCR &= ~DSI_CMCR_ARE; hdsi->Instance->CMCR |= LPCmd->AcknowledgeRequest; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Configure the flow control parameters * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param FlowControl flow control feature(s) to be enabled. * This parameter can be any combination of @ref DSI_FlowControl. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ConfigFlowControl(DSI_HandleTypeDef *hdsi, uint32_t FlowControl) { /* Process locked */ __HAL_LOCK(hdsi); /* Check the parameters */ assert_param(IS_DSI_FLOW_CONTROL(FlowControl)); /* Set the DSI Host Protocol Configuration Register */ hdsi->Instance->PCR &= ~DSI_FLOW_CONTROL_ALL; hdsi->Instance->PCR |= FlowControl; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Configure the DSI PHY timer parameters * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param PhyTimers DSI_PHY_TimerTypeDef structure that contains * the DSI PHY timing parameters * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ConfigPhyTimer(DSI_HandleTypeDef *hdsi, DSI_PHY_TimerTypeDef *PhyTimers) { uint32_t maxTime; /* Process locked */ __HAL_LOCK(hdsi); maxTime = (PhyTimers->ClockLaneLP2HSTime > PhyTimers->ClockLaneHS2LPTime)? PhyTimers->ClockLaneLP2HSTime: PhyTimers->ClockLaneHS2LPTime; /* Clock lane timer configuration */ /* In Automatic Clock Lane control mode, the DSI Host can turn off the clock lane between two High-Speed transmission. To do so, the DSI Host calculates the time required for the clock lane to change from HighSpeed to Low-Power and from Low-Power to High-Speed. This timings are configured by the HS2LP_TIME and LP2HS_TIME in the DSI Host Clock Lane Timer Configuration Register (DSI_CLTCR). But the DSI Host is not calculating LP2HS_TIME + HS2LP_TIME but 2 x HS2LP_TIME. Workaround : Configure HS2LP_TIME and LP2HS_TIME with the same value being the max of HS2LP_TIME or LP2HS_TIME. */ hdsi->Instance->CLTCR &= ~(DSI_CLTCR_LP2HS_TIME | DSI_CLTCR_HS2LP_TIME); hdsi->Instance->CLTCR |= (maxTime | ((maxTime)<<16U)); /* Data lane timer configuration */ hdsi->Instance->DLTCR &= ~(DSI_DLTCR_MRD_TIME | DSI_DLTCR_LP2HS_TIME | DSI_DLTCR_HS2LP_TIME); hdsi->Instance->DLTCR |= (PhyTimers->DataLaneMaxReadTime | ((PhyTimers->DataLaneLP2HSTime)<<16U) | ((PhyTimers->DataLaneHS2LPTime)<<24U)); /* Configure the wait period to request HS transmission after a stop state */ hdsi->Instance->PCONFR &= ~DSI_PCONFR_SW_TIME; hdsi->Instance->PCONFR |= ((PhyTimers->StopWaitTime)<<8U); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Configure the DSI HOST timeout parameters * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param HostTimeouts DSI_HOST_TimeoutTypeDef structure that contains * the DSI host timeout parameters * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ConfigHostTimeouts(DSI_HandleTypeDef *hdsi, DSI_HOST_TimeoutTypeDef *HostTimeouts) { /* Process locked */ __HAL_LOCK(hdsi); /* Set the timeout clock division factor */ hdsi->Instance->CCR &= ~DSI_CCR_TOCKDIV; hdsi->Instance->CCR |= ((HostTimeouts->TimeoutCkdiv)<<8U); /* High-speed transmission timeout */ hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_HSTX_TOCNT; hdsi->Instance->TCCR[0U] |= ((HostTimeouts->HighSpeedTransmissionTimeout)<<16U); /* Low-power reception timeout */ hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_LPRX_TOCNT; hdsi->Instance->TCCR[0U] |= HostTimeouts->LowPowerReceptionTimeout; /* High-speed read timeout */ hdsi->Instance->TCCR[1U] &= ~DSI_TCCR1_HSRD_TOCNT; hdsi->Instance->TCCR[1U] |= HostTimeouts->HighSpeedReadTimeout; /* Low-power read timeout */ hdsi->Instance->TCCR[2U] &= ~DSI_TCCR2_LPRD_TOCNT; hdsi->Instance->TCCR[2U] |= HostTimeouts->LowPowerReadTimeout; /* High-speed write timeout */ hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_HSWR_TOCNT; hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWriteTimeout; /* High-speed write presp mode */ hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_PM; hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWritePrespMode; /* Low-speed write timeout */ hdsi->Instance->TCCR[4U] &= ~DSI_TCCR4_LPWR_TOCNT; hdsi->Instance->TCCR[4U] |= HostTimeouts->LowPowerWriteTimeout; /* BTA timeout */ hdsi->Instance->TCCR[5U] &= ~DSI_TCCR5_BTA_TOCNT; hdsi->Instance->TCCR[5U] |= HostTimeouts->BTATimeout; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Start the DSI module * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_Start(DSI_HandleTypeDef *hdsi) { /* Process locked */ __HAL_LOCK(hdsi); /* Enable the DSI host */ __HAL_DSI_ENABLE(hdsi); /* Enable the DSI wrapper */ __HAL_DSI_WRAPPER_ENABLE(hdsi); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Stop the DSI module * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_Stop(DSI_HandleTypeDef *hdsi) { /* Process locked */ __HAL_LOCK(hdsi); /* Disable the DSI host */ __HAL_DSI_DISABLE(hdsi); /* Disable the DSI wrapper */ __HAL_DSI_WRAPPER_DISABLE(hdsi); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Refresh the display in command mode * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_Refresh(DSI_HandleTypeDef *hdsi) { /* Process locked */ __HAL_LOCK(hdsi); /* Update the display */ hdsi->Instance->WCR |= DSI_WCR_LTDCEN; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Controls the display color mode in Video mode * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param ColorMode Color mode (full or 8-colors). * This parameter can be any value of @ref DSI_Color_Mode * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ColorMode(DSI_HandleTypeDef *hdsi, uint32_t ColorMode) { /* Process locked */ __HAL_LOCK(hdsi); /* Check the parameters */ assert_param(IS_DSI_COLOR_MODE(ColorMode)); /* Update the display color mode */ hdsi->Instance->WCR &= ~DSI_WCR_COLM; hdsi->Instance->WCR |= ColorMode; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Control the display shutdown in Video mode * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param Shutdown Shut-down (Display-ON or Display-OFF). * This parameter can be any value of @ref DSI_ShutDown * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_Shutdown(DSI_HandleTypeDef *hdsi, uint32_t Shutdown) { /* Process locked */ __HAL_LOCK(hdsi); /* Check the parameters */ assert_param(IS_DSI_SHUT_DOWN(Shutdown)); /* Update the display Shutdown */ hdsi->Instance->WCR &= ~DSI_WCR_SHTDN; hdsi->Instance->WCR |= Shutdown; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief write short DCS or short Generic command * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param ChannelID Virtual channel ID. * @param Mode DSI short packet data type. * This parameter can be any value of @ref DSI_SHORT_WRITE_PKT_Data_Type. * @param Param1 DSC command or first generic parameter. * This parameter can be any value of @ref DSI_DCS_Command or a * generic command code. * @param Param2 DSC parameter or second generic parameter. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ShortWrite(DSI_HandleTypeDef *hdsi, uint32_t ChannelID, uint32_t Mode, uint32_t Param1, uint32_t Param2) { uint32_t tickstart; /* Process locked */ __HAL_LOCK(hdsi); /* Check the parameters */ assert_param(IS_DSI_SHORT_WRITE_PACKET_TYPE(Mode)); /* Get tick */ tickstart = HAL_GetTick(); /* Wait for Command FIFO Empty */ while((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == 0U) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } /* Configure the packet to send a short DCS command with 0 or 1 parameter */ DSI_ConfigPacketHeader(hdsi->Instance, ChannelID, Mode, Param1, Param2); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief write long DCS or long Generic command * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param ChannelID Virtual channel ID. * @param Mode DSI long packet data type. * This parameter can be any value of @ref DSI_LONG_WRITE_PKT_Data_Type. * @param NbParams Number of parameters. * @param Param1 DSC command or first generic parameter. * This parameter can be any value of @ref DSI_DCS_Command or a * generic command code * @param ParametersTable Pointer to parameter values table. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_LongWrite(DSI_HandleTypeDef *hdsi, uint32_t ChannelID, uint32_t Mode, uint32_t NbParams, uint32_t Param1, uint8_t* ParametersTable) { uint32_t uicounter, nbBytes, count; uint32_t tickstart; uint32_t fifoword; uint8_t* pparams = ParametersTable; /* Process locked */ __HAL_LOCK(hdsi); /* Check the parameters */ assert_param(IS_DSI_LONG_WRITE_PACKET_TYPE(Mode)); /* Get tick */ tickstart = HAL_GetTick(); /* Wait for Command FIFO Empty */ while((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == RESET) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } /* Set the DCS code on payload byte 1, and the other parameters on the write FIFO command*/ fifoword = Param1; nbBytes = (NbParams < 3U) ? NbParams : 3U; for(count = 0U; count < nbBytes; count++) { fifoword |= (((uint32_t)(*(pparams + count))) << (8U + (8U*count))); } hdsi->Instance->GPDR = fifoword; uicounter = NbParams - nbBytes; pparams += nbBytes; /* Set the Next parameters on the write FIFO command*/ while(uicounter != 0U) { nbBytes = (uicounter < 4U) ? uicounter : 4U; fifoword = 0U; for(count = 0U; count < nbBytes; count++) { fifoword |= (((uint32_t)(*(pparams + count))) << (8U*count)); } hdsi->Instance->GPDR = fifoword; uicounter -= nbBytes; pparams += nbBytes; } /* Configure the packet to send a long DCS command */ DSI_ConfigPacketHeader(hdsi->Instance, ChannelID, Mode, ((NbParams+1U)&0x00FFU), (((NbParams+1U)&0xFF00U)>>8U)); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Read command (DCS or generic) * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param ChannelNbr Virtual channel ID * @param Array pointer to a buffer to store the payload of a read back operation. * @param Size Data size to be read (in byte). * @param Mode DSI read packet data type. * This parameter can be any value of @ref DSI_SHORT_READ_PKT_Data_Type. * @param DCSCmd DCS get/read command. * @param ParametersTable Pointer to parameter values table. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_Read(DSI_HandleTypeDef *hdsi, uint32_t ChannelNbr, uint8_t* Array, uint32_t Size, uint32_t Mode, uint32_t DCSCmd, uint8_t* ParametersTable) { uint32_t tickstart; uint8_t* pdata = Array; uint32_t datasize = Size; /* Process locked */ __HAL_LOCK(hdsi); /* Check the parameters */ assert_param(IS_DSI_READ_PACKET_TYPE(Mode)); if(datasize > 2U) { /* set max return packet size */ if (HAL_DSI_ShortWrite(hdsi, ChannelNbr, DSI_MAX_RETURN_PKT_SIZE, ((datasize)&0xFFU), (((datasize)>>8U)&0xFFU)) != HAL_OK) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } } /* Configure the packet to read command */ if (Mode == DSI_DCS_SHORT_PKT_READ) { DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, DCSCmd, 0U); } else if (Mode == DSI_GEN_SHORT_PKT_READ_P0) { DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, 0U, 0U); } else if (Mode == DSI_GEN_SHORT_PKT_READ_P1) { DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], 0U); } else if (Mode == DSI_GEN_SHORT_PKT_READ_P2) { DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], ParametersTable[1U]); } else { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } /* Get tick */ tickstart = HAL_GetTick(); /* Check that the payload read FIFO is not empty */ while((hdsi->Instance->GPSR & DSI_GPSR_PRDFE) == DSI_GPSR_PRDFE) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } /* Get the first byte */ *((uint32_t *)pdata) = (hdsi->Instance->GPDR); if (datasize > 4U) { datasize -= 4U; pdata += 4U; } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /* Get tick */ tickstart = HAL_GetTick(); /* Get the remaining bytes if any */ while(((int)(datasize)) > 0) { if((hdsi->Instance->GPSR & DSI_GPSR_PRDFE) == 0U) { *((uint32_t *)pdata) = (hdsi->Instance->GPDR); datasize -= 4U; pdata += 4U; } /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL running * (only data lanes are in ULPM) * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_EnterULPMData(DSI_HandleTypeDef *hdsi) { uint32_t tickstart; /* Process locked */ __HAL_LOCK(hdsi); /* ULPS Request on Data Lanes */ hdsi->Instance->PUCR |= DSI_PUCR_URDL; /* Get tick */ tickstart = HAL_GetTick(); /* Wait until the D-PHY active lanes enter into ULPM */ if((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) { while((hdsi->Instance->PSR & DSI_PSR_UAN0) != RESET) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } } else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) { while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != RESET) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL running * (only data lanes are in ULPM) * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ExitULPMData(DSI_HandleTypeDef *hdsi) { uint32_t tickstart; /* Process locked */ __HAL_LOCK(hdsi); /* Exit ULPS on Data Lanes */ hdsi->Instance->PUCR |= DSI_PUCR_UEDL; /* Get tick */ tickstart = HAL_GetTick(); /* Wait until all active lanes exit ULPM */ if((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) { while((hdsi->Instance->PSR & DSI_PSR_UAN0) != DSI_PSR_UAN0) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } } else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) { while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1)) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } /* wait for 1 ms*/ HAL_Delay(1U); /* De-assert the ULPM requests and the ULPM exit bits */ hdsi->Instance->PUCR = 0U; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off * (both data and clock lanes are in ULPM) * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_EnterULPM(DSI_HandleTypeDef *hdsi) { uint32_t tickstart; /* Process locked */ __HAL_LOCK(hdsi); /* Clock lane configuration: no more HS request */ hdsi->Instance->CLCR &= ~DSI_CLCR_DPCC; /* Use system PLL as byte lane clock source before stopping DSIPHY clock source */ __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_PLLR); /* ULPS Request on Clock and Data Lanes */ hdsi->Instance->PUCR |= (DSI_PUCR_URCL | DSI_PUCR_URDL); /* Get tick */ tickstart = HAL_GetTick(); /* Wait until all active lanes exit ULPM */ if((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) { while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != RESET) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } } else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) { while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != RESET) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } /* Turn off the DSI PLL */ __HAL_DSI_PLL_DISABLE(hdsi); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off * (both data and clock lanes are in ULPM) * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ExitULPM(DSI_HandleTypeDef *hdsi) { uint32_t tickstart; /* Process locked */ __HAL_LOCK(hdsi); /* Turn on the DSI PLL */ __HAL_DSI_PLL_ENABLE(hdsi); /* Get tick */ tickstart = HAL_GetTick(); /* Wait for the lock of the PLL */ while(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == RESET) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } /* Exit ULPS on Clock and Data Lanes */ hdsi->Instance->PUCR |= (DSI_PUCR_UECL | DSI_PUCR_UEDL); /* Get tick */ tickstart = HAL_GetTick(); /* Wait until all active lanes exit ULPM */ if((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) { while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UANC)) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } } else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) { while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) { /* Check for the Timeout */ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE) { /* Process Unlocked */ __HAL_UNLOCK(hdsi); return HAL_TIMEOUT; } } } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } /* wait for 1 ms */ HAL_Delay(1U); /* De-assert the ULPM requests and the ULPM exit bits */ hdsi->Instance->PUCR = 0U; /* Switch the lanbyteclock source in the RCC from system PLL to D-PHY */ __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_DSIPHY); /* Restore clock lane configuration to HS */ hdsi->Instance->CLCR |= DSI_CLCR_DPCC; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Start test pattern generation * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param Mode Pattern generator mode * This parameter can be one of the following values: * 0 : Color bars (horizontal or vertical) * 1 : BER pattern (vertical only) * @param Orientation Pattern generator orientation * This parameter can be one of the following values: * 0 : Vertical color bars * 1 : Horizontal color bars * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_PatternGeneratorStart(DSI_HandleTypeDef *hdsi, uint32_t Mode, uint32_t Orientation) { /* Process locked */ __HAL_LOCK(hdsi); /* Configure pattern generator mode and orientation */ hdsi->Instance->VMCR &= ~(DSI_VMCR_PGM | DSI_VMCR_PGO); hdsi->Instance->VMCR |= ((Mode<<20U) | (Orientation<<24U)); /* Enable pattern generator by setting PGE bit */ hdsi->Instance->VMCR |= DSI_VMCR_PGE; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Stop test pattern generation * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_PatternGeneratorStop(DSI_HandleTypeDef *hdsi) { /* Process locked */ __HAL_LOCK(hdsi); /* Disable pattern generator by clearing PGE bit */ hdsi->Instance->VMCR &= ~DSI_VMCR_PGE; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Set Slew-Rate And Delay Tuning * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param CommDelay Communication delay to be adjusted. * This parameter can be any value of @ref DSI_Communication_Delay * @param Lane select between clock or data lanes. * This parameter can be any value of @ref DSI_Lane_Group * @param Value Custom value of the slew-rate or delay * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_SetSlewRateAndDelayTuning(DSI_HandleTypeDef *hdsi, uint32_t CommDelay, uint32_t Lane, uint32_t Value) { /* Process locked */ __HAL_LOCK(hdsi); /* Check function parameters */ assert_param(IS_DSI_COMMUNICATION_DELAY(CommDelay)); assert_param(IS_DSI_LANE_GROUP(Lane)); switch(CommDelay) { case DSI_SLEW_RATE_HSTX: if(Lane == DSI_CLOCK_LANE) { /* High-Speed Transmission Slew Rate Control on Clock Lane */ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCCL; hdsi->Instance->WPCR[1U] |= Value<<16U; } else if(Lane == DSI_DATA_LANES) { /* High-Speed Transmission Slew Rate Control on Data Lanes */ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCDL; hdsi->Instance->WPCR[1U] |= Value<<18U; } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } break; case DSI_SLEW_RATE_LPTX: if(Lane == DSI_CLOCK_LANE) { /* Low-Power transmission Slew Rate Compensation on Clock Lane */ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCCL; hdsi->Instance->WPCR[1U] |= Value<<6U; } else if(Lane == DSI_DATA_LANES) { /* Low-Power transmission Slew Rate Compensation on Data Lanes */ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCDL; hdsi->Instance->WPCR[1U] |= Value<<8U; } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } break; case DSI_HS_DELAY: if(Lane == DSI_CLOCK_LANE) { /* High-Speed Transmission Delay on Clock Lane */ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDCL; hdsi->Instance->WPCR[1U] |= Value; } else if(Lane == DSI_DATA_LANES) { /* High-Speed Transmission Delay on Data Lanes */ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDDL; hdsi->Instance->WPCR[1U] |= Value<<2U; } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } break; default: break; } /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Low-Power Reception Filter Tuning * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param Frequency cutoff frequency of low-pass filter at the input of LPRX * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_SetLowPowerRXFilter(DSI_HandleTypeDef *hdsi, uint32_t Frequency) { /* Process locked */ __HAL_LOCK(hdsi); /* Low-Power RX low-pass Filtering Tuning */ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPRXFT; hdsi->Instance->WPCR[1U] |= Frequency<<25U; /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Activate an additional current path on all lanes to meet the SDDTx parameter * defined in the MIPI D-PHY specification * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param State ENABLE or DISABLE * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_SetSDD(DSI_HandleTypeDef *hdsi, FunctionalState State) { /* Process locked */ __HAL_LOCK(hdsi); /* Check function parameters */ assert_param(IS_FUNCTIONAL_STATE(State)); /* Activate/Disactivate additional current path on all lanes */ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_SDDC; hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 12U); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Custom lane pins configuration * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param CustomLane Function to be applyed on selected lane. * This parameter can be any value of @ref DSI_CustomLane * @param Lane select between clock or data lane 0 or data lane 1. * This parameter can be any value of @ref DSI_Lane_Select * @param State ENABLE or DISABLE * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_SetLanePinsConfiguration(DSI_HandleTypeDef *hdsi, uint32_t CustomLane, uint32_t Lane, FunctionalState State) { /* Process locked */ __HAL_LOCK(hdsi); /* Check function parameters */ assert_param(IS_DSI_CUSTOM_LANE(CustomLane)); assert_param(IS_DSI_LANE(Lane)); assert_param(IS_FUNCTIONAL_STATE(State)); switch(CustomLane) { case DSI_SWAP_LANE_PINS: if(Lane == DSI_CLK_LANE) { /* Swap pins on clock lane */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWCL; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 6U); } else if(Lane == DSI_DATA_LANE0) { /* Swap pins on data lane 0 */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL0; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 7U); } else if(Lane == DSI_DATA_LANE1) { /* Swap pins on data lane 1 */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL1; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 8U); } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } break; case DSI_INVERT_HS_SIGNAL: if(Lane == DSI_CLK_LANE) { /* Invert HS signal on clock lane */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSICL; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 9U); } else if(Lane == DSI_DATA_LANE0) { /* Invert HS signal on data lane 0 */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL0; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 10U); } else if(Lane == DSI_DATA_LANE1) { /* Invert HS signal on data lane 1 */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL1; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 11U); } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } break; default: break; } /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Set custom timing for the PHY * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param Timing PHY timing to be adjusted. * This parameter can be any value of @ref DSI_PHY_Timing * @param State ENABLE or DISABLE * @param Value Custom value of the timing * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_SetPHYTimings(DSI_HandleTypeDef *hdsi, uint32_t Timing, FunctionalState State, uint32_t Value) { /* Process locked */ __HAL_LOCK(hdsi); /* Check function parameters */ assert_param(IS_DSI_PHY_TIMING(Timing)); assert_param(IS_FUNCTIONAL_STATE(State)); switch(Timing) { case DSI_TCLK_POST: /* Enable/Disable custom timing setting */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPOSTEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 27U); if(State != DISABLE) { /* Set custom value */ hdsi->Instance->WPCR[4U] &= ~DSI_WPCR4_TCLKPOST; hdsi->Instance->WPCR[4U] |= Value & DSI_WPCR4_TCLKPOST; } break; case DSI_TLPX_CLK: /* Enable/Disable custom timing setting */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXCEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 26U); if(State != DISABLE) { /* Set custom value */ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXC; hdsi->Instance->WPCR[3U] |= (Value << 24U) & DSI_WPCR3_TLPXC; } break; case DSI_THS_EXIT: /* Enable/Disable custom timing setting */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSEXITEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 25U); if(State != DISABLE) { /* Set custom value */ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSEXIT; hdsi->Instance->WPCR[3U] |= (Value << 16U) & DSI_WPCR3_THSEXIT; } break; case DSI_TLPX_DATA: /* Enable/Disable custom timing setting */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXDEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 24U); if(State != DISABLE) { /* Set custom value */ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXD; hdsi->Instance->WPCR[3U] |= (Value << 8U) & DSI_WPCR3_TLPXD; } break; case DSI_THS_ZERO: /* Enable/Disable custom timing setting */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSZEROEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 23U); if(State != DISABLE) { /* Set custom value */ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSZERO; hdsi->Instance->WPCR[3U] |= Value & DSI_WPCR3_THSZERO; } break; case DSI_THS_TRAIL: /* Enable/Disable custom timing setting */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSTRAILEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 22U); if(State != DISABLE) { /* Set custom value */ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSTRAIL; hdsi->Instance->WPCR[2U] |= (Value << 24U) & DSI_WPCR2_THSTRAIL; } break; case DSI_THS_PREPARE: /* Enable/Disable custom timing setting */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSPREPEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 21U); if(State != DISABLE) { /* Set custom value */ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSPREP; hdsi->Instance->WPCR[2U] |= (Value << 16U) & DSI_WPCR2_THSPREP; } break; case DSI_TCLK_ZERO: /* Enable/Disable custom timing setting */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKZEROEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 20U); if(State != DISABLE) { /* Set custom value */ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKZERO; hdsi->Instance->WPCR[2U] |= (Value << 8U) & DSI_WPCR2_TCLKZERO; } break; case DSI_TCLK_PREPARE: /* Enable/Disable custom timing setting */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPREPEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 19U); if(State != DISABLE) { /* Set custom value */ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKPREP; hdsi->Instance->WPCR[2U] |= Value & DSI_WPCR2_TCLKPREP; } break; default: break; } /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Force the Clock/Data Lane in TX Stop Mode * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param Lane select between clock or data lanes. * This parameter can be any value of @ref DSI_Lane_Group * @param State ENABLE or DISABLE * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ForceTXStopMode(DSI_HandleTypeDef *hdsi, uint32_t Lane, FunctionalState State) { /* Process locked */ __HAL_LOCK(hdsi); /* Check function parameters */ assert_param(IS_DSI_LANE_GROUP(Lane)); assert_param(IS_FUNCTIONAL_STATE(State)); if(Lane == DSI_CLOCK_LANE) { /* Force/Unforce the Clock Lane in TX Stop Mode */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMCL; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 12U); } else if(Lane == DSI_DATA_LANES) { /* Force/Unforce the Data Lanes in TX Stop Mode */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMDL; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 13U); } else { /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_ERROR; } /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Force LP Receiver in Low-Power Mode * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param State ENABLE or DISABLE * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ForceRXLowPower(DSI_HandleTypeDef *hdsi, FunctionalState State) { /* Process locked */ __HAL_LOCK(hdsi); /* Check function parameters */ assert_param(IS_FUNCTIONAL_STATE(State)); /* Force/Unforce LP Receiver in Low-Power Mode */ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_FLPRXLPM; hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 22U); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Force Data Lanes in RX Mode after a BTA * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param State ENABLE or DISABLE * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_ForceDataLanesInRX(DSI_HandleTypeDef *hdsi, FunctionalState State) { /* Process locked */ __HAL_LOCK(hdsi); /* Check function parameters */ assert_param(IS_FUNCTIONAL_STATE(State)); /* Force Data Lanes in RX Mode */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TDDL; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 16U); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Enable a pull-down on the lanes to prevent from floating states when unused * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param State ENABLE or DISABLE * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_SetPullDown(DSI_HandleTypeDef *hdsi, FunctionalState State) { /* Process locked */ __HAL_LOCK(hdsi); /* Check function parameters */ assert_param(IS_FUNCTIONAL_STATE(State)); /* Enable/Disable pull-down on lanes */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_PDEN; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 18U); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @brief Switch off the contention detection on data lanes * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @param State ENABLE or DISABLE * @retval HAL status */ HAL_StatusTypeDef HAL_DSI_SetContentionDetectionOff(DSI_HandleTypeDef *hdsi, FunctionalState State) { /* Process locked */ __HAL_LOCK(hdsi); /* Check function parameters */ assert_param(IS_FUNCTIONAL_STATE(State)); /* Contention Detection on Data Lanes OFF */ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_CDOFFDL; hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 14U); /* Process unlocked */ __HAL_UNLOCK(hdsi); return HAL_OK; } /** * @} */ /** @defgroup DSI_Group4 Peripheral State and Errors functions * @brief Peripheral State and Errors functions * @verbatim =============================================================================== ##### Peripheral State and Errors functions ##### =============================================================================== [..] This subsection provides functions allowing to (+) Check the DSI state. (+) Get error code. @endverbatim * @{ */ /** * @brief Return the DSI state * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval HAL state */ HAL_DSI_StateTypeDef HAL_DSI_GetState(DSI_HandleTypeDef *hdsi) { return hdsi->State; } /** * @brief Return the DSI error code * @param hdsi pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval DSI Error Code */ uint32_t HAL_DSI_GetError(DSI_HandleTypeDef *hdsi) { /* Get the error code */ return hdsi->ErrorCode; } /** * @} */ /** * @} */ /** * @} */ #endif /* DSI */ #endif /* HAL_DSI_MODULE_ENABLED */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/