Mercurial > public > ostc4
view Small_CPU/Src/rtc.c @ 496:9623f166b0c0
Bugfix display of disabled screen.
It is possible to select a screen as default which is in parallel disabled in the selection view. To avoid this the enable / disable state is not also checked when entering dive mode. The check function was depending on an ACTION. The functionality has been changed to allow the function call without ACTION.
Changed setting of compass circle position from constant position to variable
This was needed to reuse the same function in several views with different compass position
Added new views Navigation and Depth data
Both views were basically already available but the idea behind the layout is to combine all information needed for navigation dives (compass + timer) in one view. The classic maxdepth view just showed the maxdepth with a black box on the right side. this box is now used for display of average depth (shown in classic view Stopwatch)
Minor changes in compass paint function to improve code readability
Use same Y offset for all views
While switching across the views some number were shown ~20 pixel higher than others. This was caused by the usage of the line selection which works for some fonts but not for all => set linenumber to 0 for all views
author | Ideenmodellierer |
---|---|
date | Mon, 24 Aug 2020 19:53:27 +0200 |
parents | f0069f002c55 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file rtc.c * @author heinrichs weikamp gmbh * @version V0.0.1 * @date 10-Oct-2014 * @brief Source code for rtc control * @verbatim ============================================================================== ##### How to use ##### ============================================================================== @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "rtc.h" #include "stm32f4xx_hal.h" #include "stm32f4xx_hal_conf.h" #include "baseCPU2.h" RTC_HandleTypeDef RTCHandle; static void RTC_Error_Handler(void); void RTC_SetTime(RTC_TimeTypeDef stimestructure) { stimestructure.SubSeconds = 0; stimestructure.TimeFormat = RTC_HOURFORMAT_24; stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ; stimestructure.StoreOperation = RTC_STOREOPERATION_RESET; if(HAL_RTC_SetTime(&RTCHandle, &stimestructure, FORMAT_BIN) != HAL_OK) { RTC_Error_Handler(); } } void RTC_SetDate(RTC_DateTypeDef sdatestructure) { if(HAL_RTC_SetDate(&RTCHandle, &sdatestructure, FORMAT_BIN) != HAL_OK) { RTC_Error_Handler(); } } /* static void RTC_CalendarConfig(void) { RTC_DateTypeDef sdatestructure; RTC_TimeTypeDef stimestructure; //##-1- Configure the Date ################################################# // Set Date: Monday April 14th 2014 sdatestructure.Year = 0; sdatestructure.Month = RTC_MONTH_JANUARY; sdatestructure.Date = 1; sdatestructure.WeekDay = RTC_WEEKDAY_MONDAY; if(HAL_RTC_SetDate(&RTCHandle,&sdatestructure,FORMAT_BCD) != HAL_OK) { RTC_Error_Handler(); } //##-2- Configure the Time ################################################# // Set Time: 02:00:00 stimestructure.Hours = 0; stimestructure.Minutes = 0; stimestructure.Seconds = 0; stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ; stimestructure.StoreOperation = RTC_STOREOPERATION_RESET; if(HAL_RTC_SetTime(&RTCHandle,&stimestructure,FORMAT_BCD) != HAL_OK) { RTC_Error_Handler(); } //##-3- Writes a data in a RTC Backup data Register0 ####################### // HAL_RTCEx_BKUPWrite(&RTCHandle,RTC_BKP_DR0,0x32F2); } */ /* ##-1- Configure the RTC peripheral ####################################### Configure RTC prescaler and RTC data registers RTC configured as follow: - Hour Format = Format 24 - Asynch Prediv = Value according to source clock - Synch Prediv = Value according to source clock - OutPut = Output Disable - OutPutPolarity = High Polarity - OutPutType = Open Drain */ void MX_RTC_init(void) { /* Initialize RTC */ RTCHandle.Instance = RTC; RTCHandle.Init.HourFormat = RTC_HOURFORMAT_24; RTCHandle.Init.AsynchPrediv = 127; RTCHandle.Init.SynchPrediv = 255; RTCHandle.Init.OutPut = RTC_OUTPUT_DISABLE; RTCHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; RTCHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; HAL_RTC_Init(&RTCHandle); } void RTC_StopMode_2seconds(void) { /* Enable Power Control clock */ __HAL_RCC_PWR_CLK_ENABLE(); /* Disable Wake-up timer */ HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); /* Enable Wake-up timer */ HAL_RTCEx_SetWakeUpTimer_IT(&RTCHandle, (0x1000-1), RTC_WAKEUPCLOCK_RTCCLK_DIV16); /* FLASH Deep Power Down Mode enabled */ HAL_PWREx_EnableFlashPowerDown(); /*## Enter Stop Mode #######################################################*/ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI); /* Configures system clock after wake-up from STOP: enable HSI, PLL and select PLL as system clock source (HSI and PLL are disabled in STOP mode) */ SYSCLKConfig_STOP(); HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); } void RTC_Stop_11ms(void) { /* Disable Wake-up timer */ HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); /* Enable Wake-up timer */ HAL_RTCEx_SetWakeUpTimer_IT(&RTCHandle, (0x18-1), RTC_WAKEUPCLOCK_RTCCLK_DIV16); /* FLASH Deep Power Down Mode enabled */ HAL_PWREx_DisableFlashPowerDown(); /*## Enter Stop Mode #######################################################*/ HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI); /* Configures system clock after wake-up from STOP: enable HSI, PLL and select PLL as system clock source (HSI and PLL are disabled in STOP mode) */ SYSCLKConfig_STOP(); HAL_RTCEx_DeactivateWakeUpTimer(&RTCHandle); } static void RTC_Error_Handler(void) { while(1); } /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/