view Small_CPU/Src/adc.c @ 496:9623f166b0c0

Bugfix display of disabled screen. It is possible to select a screen as default which is in parallel disabled in the selection view. To avoid this the enable / disable state is not also checked when entering dive mode. The check function was depending on an ACTION. The functionality has been changed to allow the function call without ACTION. Changed setting of compass circle position from constant position to variable This was needed to reuse the same function in several views with different compass position Added new views Navigation and Depth data Both views were basically already available but the idea behind the layout is to combine all information needed for navigation dives (compass + timer) in one view. The classic maxdepth view just showed the maxdepth with a black box on the right side. this box is now used for display of average depth (shown in classic view Stopwatch) Minor changes in compass paint function to improve code readability Use same Y offset for all views While switching across the views some number were shown ~20 pixel higher than others. This was caused by the usage of the line selection which works for some fonts but not for all => set linenumber to 0 for all views
author Ideenmodellierer
date Mon, 24 Aug 2020 19:53:27 +0200
parents 5f11787b4f42
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    adc.c 
  * @author  heinrichs weikamp gmbh
  * @version V0.0.1
  * @date    11-Dec-2014
  * @brief   ADC for ambient light sensor
  *           
  @verbatim                 
  ============================================================================== 
                        ##### How to use #####
  ============================================================================== 
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/

#include "stm32f4xx_hal.h"
#include "adc.h"

/* Exported variables --------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
	ADC_HandleTypeDef    AdcHandle;
__IO uint16_t uhADCxConvertedValue = 0;

/* Private types -------------------------------------------------------------*/
#define ADCx                            ADC1
#define ADCx_CLK_ENABLE()               __ADC1_CLK_ENABLE();
#define ADCx_CHANNEL_GPIO_CLK_ENABLE()  __GPIOF_CLK_ENABLE()
     
#define ADCx_FORCE_RESET()              __ADC_FORCE_RESET()
#define ADCx_RELEASE_RESET()            __ADC_RELEASE_RESET()

/* Definition for ADCx Channel Pin */
#define ADCx_GPIO_PIN                		GPIO_PIN_0
#define ADCx_GPIO_PORT         					GPIOB 
#define ADCx_GPIO_CLK_ENABLE()          __GPIOB_CLK_ENABLE()
#define ADCx_GPIO_CLK_DISABLE()         __GPIOB_CLK_DISABLE()

/* Definition for ADCx's Channel */
#define ADCx_CHANNEL                    ADC_CHANNEL_8

/* Definition for ADCx's NVIC */
//#define ADCx_IRQn                      ADC_IRQn

/* Private function prototypes -----------------------------------------------*/
void ADC_Start_single_IT_Conversion(void);

/* Exported functions --------------------------------------------------------*/

uint16_t get_ambient_light_level(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return 800;
	#endif
	
	return uhADCxConvertedValue;
}


static void ADCx_MspInit(ADC_HandleTypeDef *hadc)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
  GPIO_InitTypeDef  GPIO_InitStruct;

  ADCx_GPIO_CLK_ENABLE();
  
  GPIO_InitStruct.Pin = ADCx_GPIO_PIN ;
  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(ADCx_GPIO_PORT, &GPIO_InitStruct);

  ADCx_CLK_ENABLE(); 

//  HAL_NVIC_SetPriority(ADCx_IRQn, 2, 0);
//  HAL_NVIC_EnableIRQ(ADCx_IRQn);
}


void ADCx_DeInit(void)
{
//	HAL_ADC_Stop_IT(&AdcHandle);
  HAL_ADC_DeInit(&AdcHandle);
}


void ADCx_Init(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	ADC_ChannelConfTypeDef sConfig;
	
  AdcHandle.Instance          = ADCx;
  
  AdcHandle.Init.ClockPrescaler				 = ADC_CLOCKPRESCALER_PCLK_DIV4;
	AdcHandle.Init.Resolution            = ADC_RESOLUTION12b;
	AdcHandle.Init.DataAlign             = ADC_DATAALIGN_RIGHT;
	AdcHandle.Init.ContinuousConvMode    = DISABLE;
	AdcHandle.Init.DiscontinuousConvMode = DISABLE;
	AdcHandle.Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE;
	AdcHandle.Init.EOCSelection          = EOC_SINGLE_CONV;
	AdcHandle.Init.NbrOfConversion       = 1;
	AdcHandle.Init.DMAContinuousRequests = DISABLE;    
      
	ADCx_MspInit(&AdcHandle);
	HAL_ADC_Init(&AdcHandle);

	sConfig.Channel = ADCx_CHANNEL;
  sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
  sConfig.Rank = 1;
  sConfig.Offset = 0;

	HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
	
//	ADC_Start_single_IT_Conversion();
}


uint32_t adc_debug_status = 0;

void adc_ambient_light_sensor_get_data(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	HAL_ADC_Start(&AdcHandle);
  HAL_ADC_PollForConversion(&AdcHandle, 10);
	adc_debug_status = HAL_ADC_GetState(&AdcHandle);
  if(adc_debug_status == HAL_ADC_STATE_EOC_REG + HAL_ADC_STATE_READY) // new HAL_ADC_STATE_READY 160613
//  if(HAL_ADC_GetState(&AdcHandle) == HAL_ADC_STATE_EOC_REG)
  uhADCxConvertedValue = HAL_ADC_GetValue(&AdcHandle);
	HAL_ADC_Stop(&AdcHandle);
}


/* Private functions ---------------------------------------------------------*/
/*
void ADC_Start_single_IT_Conversion(void)
{
	HAL_ADC_Start_IT(&AdcHandle);
}


void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* AdcHandle)
{
	extern void copyAmbientLightData(void);

  uhADCxConvertedValue = HAL_ADC_GetValue(AdcHandle);
	copyAmbientLightData();
	ADC_Start_single_IT_Conversion();
}
*/

/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/