Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h @ 809:9602a7338f28
DevBugfix CO2 sensor in streaming mode:
In standalone mode (no multiplexer) the CO2 sensor is working in streaming mode => it could happen that the OSTC received data before the scaling factor was requested. As result the CO2 values were calculated with a zero value. This problem has been fixed.
In addition some code cleanup has been done. Unifying usage of changeBaudrate function instead of old baud selection based on protocol request of Discovery firmware.
author | Ideenmodellierer |
---|---|
date | Sun, 27 Aug 2023 20:51:13 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_nand.h * @author MCD Application Team * @brief Header file of NAND HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_NAND_H #define __STM32F4xx_HAL_NAND_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) #include "stm32f4xx_ll_fsmc.h" #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) #include "stm32f4xx_ll_fmc.h" #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ STM32F479xx */ /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup NAND * @{ */ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) /* Exported typedef ----------------------------------------------------------*/ /* Exported types ------------------------------------------------------------*/ /** @defgroup NAND_Exported_Types NAND Exported Types * @{ */ /** * @brief HAL NAND State structures definition */ typedef enum { HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */ HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */ HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */ HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */ }HAL_NAND_StateTypeDef; /** * @brief NAND Memory electronic signature Structure definition */ typedef struct { /*<! NAND memory electronic signature maker and device IDs */ uint8_t Maker_Id; uint8_t Device_Id; uint8_t Third_Id; uint8_t Fourth_Id; }NAND_IDTypeDef; /** * @brief NAND Memory address Structure definition */ typedef struct { uint16_t Page; /*!< NAND memory Page address */ uint16_t Plane; /*!< NAND memory Plane address */ uint16_t Block; /*!< NAND memory Block address */ }NAND_AddressTypeDef; /** * @brief NAND Memory info Structure definition */ typedef struct { uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in bytes for 8 bits adressing or words for 16 bits addressing */ uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in bytes for 8 bits adressing or words for 16 bits addressing */ uint32_t BlockSize; /*!< NAND memory block size measured in number of pages */ uint32_t BlockNbr; /*!< NAND memory number of total blocks */ uint32_t PlaneNbr; /*!< NAND memory number of planes */ uint32_t PlaneSize; /*!< NAND memory plane size measured in number of blocks */ FunctionalState ExtraCommandEnable; /*!< NAND extra command needed for Page reading mode. This parameter is mandatory for some NAND parts after the read command (NAND_CMD_AREA_TRUE1) and before DATA reading sequence. Example: Toshiba THTH58BYG3S0HBAI6. This parameter could be ENABLE or DISABLE Please check the Read Mode sequnece in the NAND device datasheet */ }NAND_DeviceConfigTypeDef; /** * @brief NAND handle Structure definition */ typedef struct { FMC_NAND_TypeDef *Instance; /*!< Register base address */ FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */ HAL_LockTypeDef Lock; /*!< NAND locking object */ __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */ NAND_DeviceConfigTypeDef Config; /*!< NAND phusical characteristic information structure */ }NAND_HandleTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /* Exported macros ------------------------------------------------------------*/ /** @defgroup NAND_Exported_Macros NAND Exported Macros * @{ */ /** @brief Reset NAND handle state * @param __HANDLE__ specifies the NAND handle. * @retval None */ #define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup NAND_Exported_Functions NAND Exported Functions * @{ */ /** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ /* Initialization/de-initialization functions ********************************/ /* Initialization/de-initialization functions ********************************/ HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing); HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand); HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig); HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID); void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand); void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand); void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand); void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand); /** * @} */ /** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions * @{ */ /* IO operation functions ****************************************************/ HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand); HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead); HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite); HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead); HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite); HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToRead); HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToWrite); HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaToRead); HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaTowrite); HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand); uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); /** * @} */ /** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions * @{ */ /* NAND Control functions ****************************************************/ HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand); HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand); HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout); /** * @} */ /** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions * @{ */ /* NAND State functions *******************************************************/ HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup NAND_Private_Constants NAND Private Constants * @{ */ #define NAND_DEVICE1 0x70000000U #define NAND_DEVICE2 0x80000000U #define NAND_WRITE_TIMEOUT 0x01000000U #define CMD_AREA ((uint32_t)(1U<<16U)) /* A16 = CLE high */ #define ADDR_AREA ((uint32_t)(1U<<17U)) /* A17 = ALE high */ #define NAND_CMD_AREA_A ((uint8_t)0x00) #define NAND_CMD_AREA_B ((uint8_t)0x01) #define NAND_CMD_AREA_C ((uint8_t)0x50) #define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30) #define NAND_CMD_WRITE0 ((uint8_t)0x80) #define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10) #define NAND_CMD_ERASE0 ((uint8_t)0x60) #define NAND_CMD_ERASE1 ((uint8_t)0xD0) #define NAND_CMD_READID ((uint8_t)0x90) #define NAND_CMD_STATUS ((uint8_t)0x70) #define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A) #define NAND_CMD_RESET ((uint8_t)0xFF) /* NAND memory status */ #define NAND_VALID_ADDRESS 0x00000100U #define NAND_INVALID_ADDRESS 0x00000200U #define NAND_TIMEOUT_ERROR 0x00000400U #define NAND_BUSY 0x00000000U #define NAND_ERROR 0x00000001U #define NAND_READY 0x00000040U /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup NAND_Private_Macros NAND Private Macros * @{ */ /** * @brief NAND memory address computation. * @param __ADDRESS__ NAND memory address. * @param __HANDLE__ NAND handle. * @retval NAND Raw address value */ #define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \ (((__ADDRESS__)->Block + (((__ADDRESS__)->Plane) * ((__HANDLE__)->Config.PlaneSize)))* ((__HANDLE__)->Config.BlockSize))) /** * @brief NAND memory Column address computation. * @param __HANDLE__ NAND handle. * @retval NAND Raw address value */ #define COLUMN_ADDRESS( __HANDLE__) ((__HANDLE__)->Config.PageSize) /** * @brief NAND memory address cycling. * @param __ADDRESS__ NAND memory address. * @retval NAND address cycling value. */ #define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */ #define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */ #define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */ #define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */ /** * @brief NAND memory Columns cycling. * @param __ADDRESS__ NAND memory address. * @retval NAND Column address cycling value. */ #define COLUMN_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st Column addressing cycle */ #define COLUMN_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd Column addressing cycle */ /** * @} */ #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\ STM32F446xx || STM32F469xx || STM32F479xx */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_NAND_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/