Mercurial > public > ostc4

view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_system.h @ 571:91a8f9893e68

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Reactivate compass parameter stored in NVM: The calibration parameters are stored in NVM but the automatic restore function during startup was no longer active. As result the compass needed to be calibration after every RTE update. In addition compass HW was detected at every startup causing some i2c "trouble" because of adressing not available devices. The compass HW info is now stored together with the calibration parameters to avoid i2C problems.
author Ideenmodellierer
date Wed, 25 Nov 2020 20:16:20 +0100
parents c78bcbd5deda
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    stm32f4xx_ll_system.h
  * @author  MCD Application Team
  * @brief   Header file of SYSTEM LL module.
  @verbatim
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================
    [..]
    The LL SYSTEM driver contains a set of generic APIs that can be
    used by user:
      (+) Some of the FLASH features need to be handled in the SYSTEM file.
      (+) Access to DBGCMU registers
      (+) Access to SYSCFG registers

  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_LL_SYSTEM_H
#define __STM32F4xx_LL_SYSTEM_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"

/** @addtogroup STM32F4xx_LL_Driver
  * @{
  */

#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU)

/** @defgroup SYSTEM_LL SYSTEM
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/

/* Private constants ---------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
  * @{
  */

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/

/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
  * @{
  */

/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
* @{
*/
#define LL_SYSCFG_REMAP_FLASH              (uint32_t)0x00000000                                  /*!< Main Flash memory mapped at 0x00000000              */
#define LL_SYSCFG_REMAP_SYSTEMFLASH        SYSCFG_MEMRMP_MEM_MODE_0                              /*!< System Flash memory mapped at 0x00000000            */
#if defined(FSMC_Bank1)
#define LL_SYSCFG_REMAP_FSMC               SYSCFG_MEMRMP_MEM_MODE_1                              /*!< FSMC(NOR/PSRAM 1 and 2) mapped at 0x00000000        */
#endif /* FSMC_Bank1 */
#if defined(FMC_Bank1)
#define LL_SYSCFG_REMAP_FMC                SYSCFG_MEMRMP_MEM_MODE_1                              /*!< FMC(NOR/PSRAM 1 and 2) mapped at 0x00000000         */
#define LL_SYSCFG_REMAP_SDRAM              SYSCFG_MEMRMP_MEM_MODE_2                              /*!< FMC/SDRAM mapped at 0x00000000                      */
#endif /* FMC_Bank1 */
#define LL_SYSCFG_REMAP_SRAM               (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000                          */

/**
  * @}
  */

#if defined(SYSCFG_PMC_MII_RMII_SEL)
 /** @defgroup SYSTEM_LL_EC_PMC SYSCFG PMC
* @{
*/
#define LL_SYSCFG_PMC_ETHMII               (uint32_t)0x00000000                                /*!< ETH Media MII interface */
#define LL_SYSCFG_PMC_ETHRMII              (uint32_t)SYSCFG_PMC_MII_RMII_SEL                   /*!< ETH Media RMII interface */

/**
  * @}
  */
#endif /* SYSCFG_PMC_MII_RMII_SEL */



#if defined(SYSCFG_MEMRMP_UFB_MODE)
/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE
  * @{
  */
#define LL_SYSCFG_BANKMODE_BANK1          (uint32_t)0x00000000       /*!< Flash Bank 1 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000 (TCM)
                                                                      and Flash Bank 2 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000 (TCM)*/
#define LL_SYSCFG_BANKMODE_BANK2          SYSCFG_MEMRMP_UFB_MODE     /*!< Flash Bank 2 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000(TCM)
                                                                      and Flash Bank 1 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000(TCM) */
/**
  * @}
  */
#endif /* SYSCFG_MEMRMP_UFB_MODE */
/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS
  * @{
  */ 
#if defined(SYSCFG_CFGR_FMPI2C1_SCL)
#define LL_SYSCFG_I2C_FASTMODEPLUS_SCL         SYSCFG_CFGR_FMPI2C1_SCL   /*!< Enable Fast Mode Plus on FMPI2C_SCL pin */
#define LL_SYSCFG_I2C_FASTMODEPLUS_SDA         SYSCFG_CFGR_FMPI2C1_SDA   /*!< Enable Fast Mode Plus on FMPI2C_SDA pin*/
#endif /* SYSCFG_CFGR_FMPI2C1_SCL */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT
  * @{
  */
#define LL_SYSCFG_EXTI_PORTA               (uint32_t)0               /*!< EXTI PORT A                        */
#define LL_SYSCFG_EXTI_PORTB               (uint32_t)1               /*!< EXTI PORT B                        */
#define LL_SYSCFG_EXTI_PORTC               (uint32_t)2               /*!< EXTI PORT C                        */
#define LL_SYSCFG_EXTI_PORTD               (uint32_t)3               /*!< EXTI PORT D                        */
#define LL_SYSCFG_EXTI_PORTE               (uint32_t)4               /*!< EXTI PORT E                        */
#if defined(GPIOF)
#define LL_SYSCFG_EXTI_PORTF               (uint32_t)5               /*!< EXTI PORT F                        */
#endif /* GPIOF */
#if defined(GPIOG)
#define LL_SYSCFG_EXTI_PORTG               (uint32_t)6               /*!< EXTI PORT G                        */
#endif /* GPIOG */
#define LL_SYSCFG_EXTI_PORTH               (uint32_t)7               /*!< EXTI PORT H                        */
#if defined(GPIOI)
#define LL_SYSCFG_EXTI_PORTI               (uint32_t)8               /*!< EXTI PORT I                        */
#endif /* GPIOI */
#if defined(GPIOJ)
#define LL_SYSCFG_EXTI_PORTJ               (uint32_t)9               /*!< EXTI PORT J                        */
#endif /* GPIOJ */
#if defined(GPIOK)
#define LL_SYSCFG_EXTI_PORTK               (uint32_t)10              /*!< EXTI PORT k                        */
#endif /* GPIOK */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE
  * @{
  */
#define LL_SYSCFG_EXTI_LINE0               (uint32_t)(0x000FU << 16 | 0)  /*!< EXTI_POSITION_0  | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE1               (uint32_t)(0x00F0U << 16 | 0)  /*!< EXTI_POSITION_4  | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE2               (uint32_t)(0x0F00U << 16 | 0)  /*!< EXTI_POSITION_8  | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE3               (uint32_t)(0xF000U << 16 | 0)  /*!< EXTI_POSITION_12 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE4               (uint32_t)(0x000FU << 16 | 1)  /*!< EXTI_POSITION_0  | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE5               (uint32_t)(0x00F0U << 16 | 1)  /*!< EXTI_POSITION_4  | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE6               (uint32_t)(0x0F00U << 16 | 1)  /*!< EXTI_POSITION_8  | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE7               (uint32_t)(0xF000U << 16 | 1)  /*!< EXTI_POSITION_12 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE8               (uint32_t)(0x000FU << 16 | 2)  /*!< EXTI_POSITION_0  | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE9               (uint32_t)(0x00F0U << 16 | 2)  /*!< EXTI_POSITION_4  | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE10              (uint32_t)(0x0F00U << 16 | 2)  /*!< EXTI_POSITION_8  | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE11              (uint32_t)(0xF000U << 16 | 2)  /*!< EXTI_POSITION_12 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE12              (uint32_t)(0x000FU << 16 | 3)  /*!< EXTI_POSITION_0  | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE13              (uint32_t)(0x00F0U << 16 | 3)  /*!< EXTI_POSITION_4  | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE14              (uint32_t)(0x0F00U << 16 | 3)  /*!< EXTI_POSITION_8  | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE15              (uint32_t)(0xF000U << 16 | 3)  /*!< EXTI_POSITION_12 | EXTICR[3] */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK
  * @{
  */
#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
#define LL_SYSCFG_TIMBREAK_LOCKUP          SYSCFG_CFGR2_LOCKUP_LOCK   /*!< Enables and locks the LOCKUP output of CortexM4 
                                                                      with Break Input of TIM1/8                                    */
#define LL_SYSCFG_TIMBREAK_PVD             SYSCFG_CFGR2_PVD_LOCK      /*!< Enables and locks the PVD connection with TIM1/8 Break Input 
                                                                      and also the PVDE and PLS bits of the Power Control Interface  */
#endif /* SYSCFG_CFGR2_CLL */
/**
  * @}
  */

#if defined(SYSCFG_MCHDLYCR_BSCKSEL)
/** @defgroup SYSTEM_LL_DFSDM_BitStream_ClockSource SYSCFG MCHDLY BCKKSEL
  * @{
  */
#define LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1          (uint32_t)0x00000000
#define LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2           SYSCFG_MCHDLYCR_BSCKSEL
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM_MCHDLYEN              SYSCFG MCHDLY MCHDLYEN
  * @{
  */  
#define LL_SYSCFG_DFSDM1_MCHDLYEN                  SYSCFG_MCHDLYCR_MCHDLY1EN
#define LL_SYSCFG_DFSDM2_MCHDLYEN                  SYSCFG_MCHDLYCR_MCHDLY2EN
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM_DataIn0_Source       SYSCFG MCHDLY DFSDMD0SEL
  * @{
  */
#define LL_SYSCFG_DFSDM1_DataIn0                   SYSCFG_MCHDLYCR_DFSDM1D0SEL
#define LL_SYSCFG_DFSDM2_DataIn0                   SYSCFG_MCHDLYCR_DFSDM2D0SEL

#define LL_SYSCFG_DFSDM1_DataIn0_PAD               (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | 0x00000000)
#define LL_SYSCFG_DFSDM1_DataIn0_DM                (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D0SEL)
#define LL_SYSCFG_DFSDM2_DataIn0_PAD               (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | 0x00000000)
#define LL_SYSCFG_DFSDM2_DataIn0_DM                (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D0SEL)
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM_DataIn2_Source       SYSCFG MCHDLY DFSDMD2SEL
  * @{
  */   
#define LL_SYSCFG_DFSDM1_DataIn2                   SYSCFG_MCHDLYCR_DFSDM1D2SEL
#define LL_SYSCFG_DFSDM2_DataIn2                   SYSCFG_MCHDLYCR_DFSDM2D2SEL

#define LL_SYSCFG_DFSDM1_DataIn2_PAD               (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | 0x00000000)
#define LL_SYSCFG_DFSDM1_DataIn2_DM                (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D2SEL)
#define LL_SYSCFG_DFSDM2_DataIn2_PAD               (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | 0x00000000)
#define LL_SYSCFG_DFSDM2_DataIn2_DM                (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D2SEL)
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC2_BitstreamDistribution  SYSCFG MCHDLY DFSDM1CK02SEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0           (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2           SYSCFG_MCHDLYCR_DFSDM1CK02SEL
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC1_BitstreamDistribution  SYSCFG MCHDLY DFSDM1CK13SEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1           (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3           SYSCFG_MCHDLYCR_DFSDM1CK13SEL
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM1_CLKIN_SourceSelection SYSCFG MCHDLY DFSDMCFG
  * @{
  */
#define LL_SYSCFG_DFSDM1_CKIN_PAD                 (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM1_CKIN_DM                  SYSCFG_MCHDLYCR_DFSDM1CFG
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM1_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM1CKOSEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM1_CKOUT                    (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM1_CKOUT_M27                SYSCFG_MCHDLYCR_DFSDM1CKOSEL
/**
  * @}
  */

/** @defgroup SYSTEM_LL_DFSDM2_DataIn4_SourceSelection SYSCFG MCHDLY DFSDM2D4SEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM2_DataIn4_PAD              (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM2_DataIn4_DM               SYSCFG_MCHDLYCR_DFSDM2D4SEL
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM2_DataIn6_SourceSelection SYSCFG MCHDLY DFSDM2D6SEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM2_DataIn6_PAD              (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM2_DataIn6_DM               SYSCFG_MCHDLYCR_DFSDM2D6SEL
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC4_BitstreamDistribution  SYSCFG MCHDLY DFSDM2CK04SEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0           (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4           SYSCFG_MCHDLYCR_DFSDM2CK04SEL
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC3_BitstreamDistribution  SYSCFG MCHDLY DFSDM2CK15SEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1           (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5           SYSCFG_MCHDLYCR_DFSDM2CK15SEL
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC2_BitstreamDistribution  SYSCFG MCHDLY DFSDM2CK26SEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2           (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6           SYSCFG_MCHDLYCR_DFSDM2CK26SEL
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC1_BitstreamDistribution  SYSCFG MCHDLY DFSDM2CK37SEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3           (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7           SYSCFG_MCHDLYCR_DFSDM2CK37SEL
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM2_CLKIN_SourceSelection SYSCFG MCHDLY DFSDM2CFG
  * @{
  */ 
#define LL_SYSCFG_DFSDM2_CKIN_PAD                 (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM2_CKIN_DM                  SYSCFG_MCHDLYCR_DFSDM2CFG
/**
  * @}
  */
/** @defgroup SYSTEM_LL_DFSDM2_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM2CKOSEL
  * @{
  */ 
#define LL_SYSCFG_DFSDM2_CKOUT                    (uint32_t)0x00000000
#define LL_SYSCFG_DFSDM2_CKOUT_M27                SYSCFG_MCHDLYCR_DFSDM2CKOSEL
/**
  * @}
  */ 
#endif /* SYSCFG_MCHDLYCR_BSCKSEL */  

/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment
  * @{
  */
#define LL_DBGMCU_TRACE_NONE               0x00000000U                                     /*!< TRACE pins not assigned (default state) */
#define LL_DBGMCU_TRACE_ASYNCH             DBGMCU_CR_TRACE_IOEN                            /*!< TRACE pin assignment for Asynchronous Mode */
#define LL_DBGMCU_TRACE_SYNCH_SIZE1        (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE2        (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE4        (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)   /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
  * @{
  */
#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM2_STOP      DBGMCU_APB1_FZ_DBG_TIM2_STOP          /*!< TIM2 counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM3_STOP      DBGMCU_APB1_FZ_DBG_TIM3_STOP          /*!< TIM3 counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM4_STOP      DBGMCU_APB1_FZ_DBG_TIM4_STOP          /*!< TIM4 counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_TIM4_STOP */
#define LL_DBGMCU_APB1_GRP1_TIM5_STOP      DBGMCU_APB1_FZ_DBG_TIM5_STOP          /*!< TIM5 counter stopped when core is halted */
#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM6_STOP      DBGMCU_APB1_FZ_DBG_TIM6_STOP          /*!< TIM6 counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM7_STOP      DBGMCU_APB1_FZ_DBG_TIM7_STOP          /*!< TIM7 counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM12_STOP     DBGMCU_APB1_FZ_DBG_TIM12_STOP         /*!< TIM12 counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_TIM12_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM13_STOP     DBGMCU_APB1_FZ_DBG_TIM13_STOP         /*!< TIM13 counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_TIM13_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM14_STOP     DBGMCU_APB1_FZ_DBG_TIM14_STOP         /*!< TIM14 counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_LPTIM_STOP)
#define LL_DBGMCU_APB1_GRP1_LPTIM_STOP     DBGMCU_APB1_FZ_DBG_LPTIM_STOP         /*!< LPTIM counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_LPTIM_STOP */
#define LL_DBGMCU_APB1_GRP1_RTC_STOP       DBGMCU_APB1_FZ_DBG_RTC_STOP           /*!< RTC counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_WWDG_STOP      DBGMCU_APB1_FZ_DBG_WWDG_STOP          /*!< Debug Window Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_IWDG_STOP      DBGMCU_APB1_FZ_DBG_IWDG_STOP          /*!< Debug Independent Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C1_STOP      DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C2_STOP      DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */
#if defined(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)
#define LL_DBGMCU_APB1_GRP1_I2C3_STOP      DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT /*!< I2C3 SMBUS timeout mode stopped when Core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT */
#if defined(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT)
#define LL_DBGMCU_APB1_GRP1_I2C4_STOP      DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT /*!< I2C4 SMBUS timeout mode stopped when Core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT */
#if defined(DBGMCU_APB1_FZ_DBG_CAN1_STOP)
#define LL_DBGMCU_APB1_GRP1_CAN1_STOP      DBGMCU_APB1_FZ_DBG_CAN1_STOP          /*!< CAN1 debug stopped when Core is halted  */
#endif /* DBGMCU_APB1_FZ_DBG_CAN1_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_CAN2_STOP)
#define LL_DBGMCU_APB1_GRP1_CAN2_STOP      DBGMCU_APB1_FZ_DBG_CAN2_STOP          /*!< CAN2 debug stopped when Core is halted  */
#endif /* DBGMCU_APB1_FZ_DBG_CAN2_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_CAN3_STOP)
#define LL_DBGMCU_APB1_GRP1_CAN3_STOP      DBGMCU_APB1_FZ_DBG_CAN3_STOP          /*!< CAN3 debug stopped when Core is halted  */
#endif /* DBGMCU_APB1_FZ_DBG_CAN3_STOP */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
  * @{
  */
#define LL_DBGMCU_APB2_GRP1_TIM1_STOP      DBGMCU_APB2_FZ_DBG_TIM1_STOP   /*!< TIM1 counter stopped when core is halted */
#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP)
#define LL_DBGMCU_APB2_GRP1_TIM8_STOP      DBGMCU_APB2_FZ_DBG_TIM8_STOP   /*!< TIM8 counter stopped when core is halted */
#endif /* DBGMCU_APB2_FZ_DBG_TIM8_STOP */
#define LL_DBGMCU_APB2_GRP1_TIM9_STOP      DBGMCU_APB2_FZ_DBG_TIM9_STOP   /*!< TIM9 counter stopped when core is halted */
#if defined(DBGMCU_APB2_FZ_DBG_TIM10_STOP)
#define LL_DBGMCU_APB2_GRP1_TIM10_STOP     DBGMCU_APB2_FZ_DBG_TIM10_STOP   /*!< TIM10 counter stopped when core is halted */
#endif /* DBGMCU_APB2_FZ_DBG_TIM10_STOP */
#define LL_DBGMCU_APB2_GRP1_TIM11_STOP     DBGMCU_APB2_FZ_DBG_TIM11_STOP   /*!< TIM11 counter stopped when core is halted */
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
  * @{
  */
#define LL_FLASH_LATENCY_0                 FLASH_ACR_LATENCY_0WS   /*!< FLASH Zero wait state */
#define LL_FLASH_LATENCY_1                 FLASH_ACR_LATENCY_1WS   /*!< FLASH One wait state */
#define LL_FLASH_LATENCY_2                 FLASH_ACR_LATENCY_2WS   /*!< FLASH Two wait states */
#define LL_FLASH_LATENCY_3                 FLASH_ACR_LATENCY_3WS   /*!< FLASH Three wait states */
#define LL_FLASH_LATENCY_4                 FLASH_ACR_LATENCY_4WS   /*!< FLASH Four wait states */
#define LL_FLASH_LATENCY_5                 FLASH_ACR_LATENCY_5WS   /*!< FLASH five wait state */
#define LL_FLASH_LATENCY_6                 FLASH_ACR_LATENCY_6WS   /*!< FLASH six wait state */
#define LL_FLASH_LATENCY_7                 FLASH_ACR_LATENCY_7WS   /*!< FLASH seven wait states */
#define LL_FLASH_LATENCY_8                 FLASH_ACR_LATENCY_8WS   /*!< FLASH eight wait states */
#define LL_FLASH_LATENCY_9                 FLASH_ACR_LATENCY_9WS   /*!< FLASH nine wait states */
#define LL_FLASH_LATENCY_10                FLASH_ACR_LATENCY_10WS   /*!< FLASH ten wait states */
#define LL_FLASH_LATENCY_11                FLASH_ACR_LATENCY_11WS   /*!< FLASH eleven wait states */
#define LL_FLASH_LATENCY_12                FLASH_ACR_LATENCY_12WS   /*!< FLASH twelve wait states */
#define LL_FLASH_LATENCY_13                FLASH_ACR_LATENCY_13WS   /*!< FLASH thirteen wait states */
#define LL_FLASH_LATENCY_14                FLASH_ACR_LATENCY_14WS   /*!< FLASH fourteen wait states */
#define LL_FLASH_LATENCY_15                FLASH_ACR_LATENCY_15WS   /*!< FLASH fifteen wait states */
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/

/* Exported functions --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
  * @{
  */

/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
  * @{
  */
/**
  * @brief  Set memory mapping at address 0x00000000
  * @rmtoll SYSCFG_MEMRMP MEM_MODE      LL_SYSCFG_SetRemapMemory
  * @param  Memory This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_REMAP_FLASH
  *         @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
  *         @arg @ref LL_SYSCFG_REMAP_SRAM
  *         @arg @ref LL_SYSCFG_REMAP_FSMC (*)
  *         @arg @ref LL_SYSCFG_REMAP_FMC (*)
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory)
{
  MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory);
}

/**
  * @brief  Get memory mapping at address 0x00000000
  * @rmtoll SYSCFG_MEMRMP MEM_MODE      LL_SYSCFG_GetRemapMemory
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_REMAP_FLASH
  *         @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
  *         @arg @ref LL_SYSCFG_REMAP_SRAM
  *         @arg @ref LL_SYSCFG_REMAP_FSMC (*)
  *         @arg @ref LL_SYSCFG_REMAP_FMC (*)
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE));
}

#if defined(SYSCFG_MEMRMP_SWP_FMC)
/**
  * @brief  Enables the FMC Memory Mapping Swapping
  * @rmtoll SYSCFG_MEMRMP SWP_FMC      LL_SYSCFG_EnableFMCMemorySwapping
  * @note   SDRAM is accessible at 0x60000000 and NOR/RAM 
  *         is accessible at 0xC0000000   
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_EnableFMCMemorySwapping(void)
{
  SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC_0);
}

/**
  * @brief  Disables the FMC Memory Mapping Swapping
  * @rmtoll SYSCFG_MEMRMP SWP_FMC      LL_SYSCFG_DisableFMCMemorySwapping
  * @note   SDRAM is accessible at 0xC0000000 (default mapping)  
  *         and NOR/RAM is accessible at 0x60000000 (default mapping)
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DisableFMCMemorySwapping(void)
{
  CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC);
}

#endif /* SYSCFG_MEMRMP_SWP_FMC */
/**
  * @brief  Enables the Compensation cell Power Down
  * @rmtoll SYSCFG_CMPCR CMP_PD      LL_SYSCFG_EnableCompensationCell
  * @note   The I/O compensation cell can be used only when the device supply
  *         voltage ranges from 2.4 to 3.6 V
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void)
{
  SET_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
}

/**
  * @brief  Disables the Compensation cell Power Down
  * @rmtoll SYSCFG_CMPCR CMP_PD      LL_SYSCFG_DisableCompensationCell
  * @note   The I/O compensation cell can be used only when the device supply
  *         voltage ranges from 2.4 to 3.6 V
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void)
{
  CLEAR_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
}

/**
  * @brief  Get Compensation Cell ready Flag
  * @rmtoll SYSCFG_CMPCR READY  LL_SYSCFG_IsActiveFlag_CMPCR
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void)
{
  return (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY));
}

#if defined(SYSCFG_PMC_MII_RMII_SEL)
/**
  * @brief  Select Ethernet PHY interface 
  * @rmtoll SYSCFG_PMC MII_RMII_SEL       LL_SYSCFG_SetPHYInterface
  * @param  Interface This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_PMC_ETHMII
  *         @arg @ref LL_SYSCFG_PMC_ETHRMII
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface)
{
  MODIFY_REG(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL, Interface);
}

/**
  * @brief  Get Ethernet PHY interface 
  * @rmtoll SYSCFG_PMC MII_RMII_SEL       LL_SYSCFG_GetPHYInterface
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_PMC_ETHMII
  *         @arg @ref LL_SYSCFG_PMC_ETHRMII
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL));
}
#endif /* SYSCFG_PMC_MII_RMII_SEL */
 


#if defined(SYSCFG_MEMRMP_UFB_MODE)
/**
  * @brief  Select Flash bank mode (Bank flashed at 0x08000000)
  * @rmtoll SYSCFG_MEMRMP UFB_MODE       LL_SYSCFG_SetFlashBankMode
  * @param  Bank This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_BANKMODE_BANK1
  *         @arg @ref LL_SYSCFG_BANKMODE_BANK2
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank)
{ 
  MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE, Bank);
}

/**
  * @brief  Get Flash bank mode (Bank flashed at 0x08000000)
  * @rmtoll SYSCFG_MEMRMP UFB_MODE       LL_SYSCFG_GetFlashBankMode
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_BANKMODE_BANK1
  *         @arg @ref LL_SYSCFG_BANKMODE_BANK2
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE));
}
#endif /* SYSCFG_MEMRMP_UFB_MODE */

#if defined(SYSCFG_CFGR_FMPI2C1_SCL)
/**
  * @brief  Enable the I2C fast mode plus driving capability.
  * @rmtoll SYSCFG_CFGR FMPI2C1_SCL   LL_SYSCFG_EnableFastModePlus\n
  *         SYSCFG_CFGR FMPI2C1_SDA   LL_SYSCFG_EnableFastModePlus
  * @param  ConfigFastModePlus This parameter can be a combination of the following values:
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA
  *         (*) value not defined in all devices
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus)
{
  SET_BIT(SYSCFG->CFGR, ConfigFastModePlus);
}

/**
  * @brief  Disable the I2C fast mode plus driving capability.
  * @rmtoll SYSCFG_CFGR FMPI2C1_SCL  LL_SYSCFG_DisableFastModePlus\n
  *         SYSCFG_CFGR FMPI2C1_SDA  LL_SYSCFG_DisableFastModePlus\n
  * @param  ConfigFastModePlus This parameter can be a combination of the following values:
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL
  *         @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA
  *         (*) value not defined in all devices
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus)
{
  CLEAR_BIT(SYSCFG->CFGR, ConfigFastModePlus);
}
#endif /* SYSCFG_CFGR_FMPI2C1_SCL */

/**
  * @brief  Configure source input for the EXTI external interrupt.
  * @rmtoll SYSCFG_EXTICR1 EXTIx         LL_SYSCFG_SetEXTISource\n
  *         SYSCFG_EXTICR2 EXTIx         LL_SYSCFG_SetEXTISource\n
  *         SYSCFG_EXTICR3 EXTIx         LL_SYSCFG_SetEXTISource\n
  *         SYSCFG_EXTICR4 EXTIx         LL_SYSCFG_SetEXTISource
  * @param  Port This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_EXTI_PORTA
  *         @arg @ref LL_SYSCFG_EXTI_PORTB
  *         @arg @ref LL_SYSCFG_EXTI_PORTC
  *         @arg @ref LL_SYSCFG_EXTI_PORTD
  *         @arg @ref LL_SYSCFG_EXTI_PORTE
  *         @arg @ref LL_SYSCFG_EXTI_PORTF (*)
  *         @arg @ref LL_SYSCFG_EXTI_PORTG (*)
  *         @arg @ref LL_SYSCFG_EXTI_PORTH
  *
  *         (*) value not defined in all devices
  * @param  Line This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_EXTI_LINE0
  *         @arg @ref LL_SYSCFG_EXTI_LINE1
  *         @arg @ref LL_SYSCFG_EXTI_LINE2
  *         @arg @ref LL_SYSCFG_EXTI_LINE3
  *         @arg @ref LL_SYSCFG_EXTI_LINE4
  *         @arg @ref LL_SYSCFG_EXTI_LINE5
  *         @arg @ref LL_SYSCFG_EXTI_LINE6
  *         @arg @ref LL_SYSCFG_EXTI_LINE7
  *         @arg @ref LL_SYSCFG_EXTI_LINE8
  *         @arg @ref LL_SYSCFG_EXTI_LINE9
  *         @arg @ref LL_SYSCFG_EXTI_LINE10
  *         @arg @ref LL_SYSCFG_EXTI_LINE11
  *         @arg @ref LL_SYSCFG_EXTI_LINE12
  *         @arg @ref LL_SYSCFG_EXTI_LINE13
  *         @arg @ref LL_SYSCFG_EXTI_LINE14
  *         @arg @ref LL_SYSCFG_EXTI_LINE15
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
{
  MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16), Port << POSITION_VAL((Line >> 16)));
}

/**
  * @brief  Get the configured defined for specific EXTI Line
  * @rmtoll SYSCFG_EXTICR1 EXTIx         LL_SYSCFG_GetEXTISource\n
  *         SYSCFG_EXTICR2 EXTIx         LL_SYSCFG_GetEXTISource\n
  *         SYSCFG_EXTICR3 EXTIx         LL_SYSCFG_GetEXTISource\n
  *         SYSCFG_EXTICR4 EXTIx         LL_SYSCFG_GetEXTISource
  * @param  Line This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_EXTI_LINE0
  *         @arg @ref LL_SYSCFG_EXTI_LINE1
  *         @arg @ref LL_SYSCFG_EXTI_LINE2
  *         @arg @ref LL_SYSCFG_EXTI_LINE3
  *         @arg @ref LL_SYSCFG_EXTI_LINE4
  *         @arg @ref LL_SYSCFG_EXTI_LINE5
  *         @arg @ref LL_SYSCFG_EXTI_LINE6
  *         @arg @ref LL_SYSCFG_EXTI_LINE7
  *         @arg @ref LL_SYSCFG_EXTI_LINE8
  *         @arg @ref LL_SYSCFG_EXTI_LINE9
  *         @arg @ref LL_SYSCFG_EXTI_LINE10
  *         @arg @ref LL_SYSCFG_EXTI_LINE11
  *         @arg @ref LL_SYSCFG_EXTI_LINE12
  *         @arg @ref LL_SYSCFG_EXTI_LINE13
  *         @arg @ref LL_SYSCFG_EXTI_LINE14
  *         @arg @ref LL_SYSCFG_EXTI_LINE15
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_EXTI_PORTA
  *         @arg @ref LL_SYSCFG_EXTI_PORTB
  *         @arg @ref LL_SYSCFG_EXTI_PORTC
  *         @arg @ref LL_SYSCFG_EXTI_PORTD
  *         @arg @ref LL_SYSCFG_EXTI_PORTE
  *         @arg @ref LL_SYSCFG_EXTI_PORTF (*)
  *         @arg @ref LL_SYSCFG_EXTI_PORTG (*)
  *         @arg @ref LL_SYSCFG_EXTI_PORTH
  *         (*) value not defined in all devices
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
{
  return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16)) >> POSITION_VAL(Line >> 16));
}

#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
/**
  * @brief  Set connections to TIM1/8 break inputs
  * @rmtoll SYSCFG_CFGR2 LockUp Lock           LL_SYSCFG_SetTIMBreakInputs \n
  *         SYSCFG_CFGR2 PVD Lock              LL_SYSCFG_SetTIMBreakInputs
  * @param  Break This parameter can be a combination of the following values:
  *         @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
  *         @arg @ref LL_SYSCFG_TIMBREAK_PVD
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break)
{
  MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK, Break);
}

/**
  * @brief  Get connections to TIM1/8 Break inputs
  * @rmtoll SYSCFG_CFGR2 LockUp Lock           LL_SYSCFG_SetTIMBreakInputs \n
  *         SYSCFG_CFGR2 PVD Lock              LL_SYSCFG_SetTIMBreakInputs
  * @retval Returned value can be can be a combination of the following values:
  *         @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
  *         @arg @ref LL_SYSCFG_TIMBREAK_PVD
  */
__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void)
{   
  return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK));
}
#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */
#if defined(SYSCFG_MCHDLYCR_BSCKSEL)
/**
  * @brief  Select the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock.
  * @rmtoll SYSCFG_MCHDLYCR BSCKSEL        LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection
  * @param  ClockSource This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2
  *         @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection(uint32_t ClockSource)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL, ClockSource);
}
/**
  * @brief  Get the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock.
  * @rmtoll SYSCFG_MCHDLYCR BSCKSEL       LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2
  *         @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL));
}
/**
  * @brief  Enables the DFSDM1 or DFSDM2 Delay clock
  * @rmtoll SYSCFG_MCHDLYCR MCHDLYEN      LL_SYSCFG_DFSDM_EnableDelayClock
  * @param MCHDLY This paramater can be one of the following values
  *         @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN
  *         @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM_EnableDelayClock(uint32_t MCHDLY)
{
  SET_BIT(SYSCFG->MCHDLYCR, MCHDLY);
}

/**
  * @brief  Disables the DFSDM1 or the DFSDM2 Delay clock
  * @rmtoll SYSCFG_MCHDLYCR MCHDLY1EN      LL_SYSCFG_DFSDM1_DisableDelayClock
  * @param MCHDLY This paramater can be one of the following values
  *         @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN
  *         @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM_DisableDelayClock(uint32_t MCHDLY)
{
  CLEAR_BIT(SYSCFG->MCHDLYCR, MCHDLY);
}

/**
  * @brief  Select the source for DFSDM1 or DFSDM2 DatIn0 
  * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL        LL_SYSCFG_DFSDM_SetDataIn0Source
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn0Source(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF));
}
/**
  * @brief  Get the source for DFSDM1 or DFSDM2 DatIn0.
  * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL       LL_SYSCFG_DFSDM_GetDataIn0Source
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn0
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn0
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn0Source(uint32_t Source)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source));
}
/**
  * @brief  Select the source for DFSDM1 or DFSDM2 DatIn2 
  * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL        LL_SYSCFG_DFSDM_SetDataIn2Source
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn2Source(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF));
}
/**
  * @brief  Get the source for DFSDM1 or DFSDM2 DatIn2.
  * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL       LL_SYSCFG_DFSDM_GetDataIn2Source
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn2
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn2
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD
  *         @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn2Source(uint32_t Source)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source));
}

/**
  * @brief  Select the distribution of the bitsream lock gated by TIM4 OC2 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK02SEL        LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0
  *         @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL, Source);
}
/**
  * @brief  Get the distribution of the bitsream lock gated by TIM4 OC2 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL       LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0
  *         @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL));
}

/**
  * @brief  Select the distribution of the bitsream lock gated by TIM4 OC1 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK13SEL        LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1
  *         @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL, Source);
}
/**
  * @brief  Get the distribution of the bitsream lock gated by TIM4 OC1 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL       LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1
  *         @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL));
}

/**
  * @brief  Select the DFSDM1 Clock In 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG        LL_SYSCFG_DFSDM1_SetClockInSourceSelection
  * @param  ClockSource This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD
  *         @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockInSourceSelection(uint32_t ClockSource)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG, ClockSource);
}
/**
  * @brief  GET the DFSDM1 Clock In
  * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG       LL_SYSCFG_DFSDM1_GetClockInSourceSelection
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD
  *         @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockInSourceSelection(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG));
}

/**
  * @brief  Select the DFSDM1 Clock Out 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL        LL_SYSCFG_DFSDM1_SetClockOutSourceSelection
  * @param  ClockSource This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_CKOUT
  *         @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockOutSourceSelection(uint32_t ClockSource)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL, ClockSource);
}
/**
  * @brief  GET the DFSDM1 Clock Out
  * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL       LL_SYSCFG_DFSDM1_GetClockOutSourceSelection
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM1_CKOUT
  *         @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockOutSourceSelection(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL));
}

/**
  * @brief  Enables the DFSDM2 Delay clock
  * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN      LL_SYSCFG_DFSDM2_EnableDelayClock
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_EnableDelayClock(void)
{
  SET_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN);
}

/**
  * @brief  Disables the DFSDM2 Delay clock
  * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN      LL_SYSCFG_DFSDM2_DisableDelayClock
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_DisableDelayClock(void)
{
  CLEAR_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN);
}
/**
  * @brief  Select the source for DFSDM2 DatIn0 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL        LL_SYSCFG_DFSDM2_SetDataIn0Source
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn0Source(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL, Source);
}
/**
  * @brief  Get the source for DFSDM2 DatIn0.
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL       LL_SYSCFG_DFSDM2_GetDataIn0Source
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn0Source(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL));
}

/**
  * @brief  Select the source for DFSDM2 DatIn2 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL        LL_SYSCFG_DFSDM2_SetDataIn2Source
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn2Source(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL, Source);
}
/**
  * @brief  Get the source for DFSDM2 DatIn2.
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL       LL_SYSCFG_DFSDM2_GetDataIn2Source
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn2Source(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL));
}

/**
  * @brief  Select the source for DFSDM2 DatIn4 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL        LL_SYSCFG_DFSDM2_SetDataIn4Source
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn4Source(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL, Source);
}
/**
  * @brief  Get the source for DFSDM2 DatIn4.
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL       LL_SYSCFG_DFSDM2_GetDataIn4Source
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn4Source(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL));
}

/**
  * @brief  Select the source for DFSDM2 DatIn6 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL        LL_SYSCFG_DFSDM2_SetDataIn6Source
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn6Source(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL, Source);
}
/**
  * @brief  Get the source for DFSDM2 DatIn6.
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL       LL_SYSCFG_DFSDM2_GetDataIn6Source
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn6Source(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL));
}

/**
  * @brief  Select the distribution of the bitsream lock gated by TIM3 OC4 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL        LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL, Source);
}
/**
  * @brief  Get the distribution of the bitsream lock gated by TIM3 OC4 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL       LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL));
}

/**
  * @brief  Select the distribution of the bitsream lock gated by TIM3 OC3 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK15SEL        LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL, Source);
}
/**
  * @brief  Get the distribution of the bitsream lock gated by TIM3 OC4 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL       LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL));
}

/**
  * @brief  Select the distribution of the bitsream lock gated by TIM3 OC2 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK26SEL        LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL, Source);
}
/**
  * @brief  Get the distribution of the bitsream lock gated by TIM3 OC2 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL       LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL));
}

/**
  * @brief  Select the distribution of the bitsream lock gated by TIM3 OC1 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL        LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution
  * @param  Source This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution(uint32_t Source)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL, Source);
}
/**
  * @brief  Get the distribution of the bitsream lock gated by TIM3 OC1 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL       LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3
  *         @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL));
}

/**
  * @brief  Select the DFSDM2 Clock In 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG        LL_SYSCFG_DFSDM2_SetClockInSourceSelection
  * @param  ClockSource This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockInSourceSelection(uint32_t ClockSource)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG, ClockSource);
}
/**
  * @brief  GET the DFSDM2 Clock In
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG       LL_SYSCFG_DFSDM2_GetClockInSourceSelection
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD
  *         @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockInSourceSelection(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG));
}

/**
  * @brief  Select the DFSDM2 Clock Out 
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL        LL_SYSCFG_DFSDM2_SetClockOutSourceSelection
  * @param  ClockSource This parameter can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_CKOUT
  *         @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27
  * @retval None
  */
__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockOutSourceSelection(uint32_t ClockSource)
{
  MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL, ClockSource);
}
/**
  * @brief  GET the DFSDM2 Clock Out
  * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL       LL_SYSCFG_DFSDM2_GetClockOutSourceSelection
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_SYSCFG_DFSDM2_CKOUT
  *         @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27
  * @retval None
  */
__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockOutSourceSelection(void)
{
  return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL));
}

#endif /* SYSCFG_MCHDLYCR_BSCKSEL */
/**
  * @}
  */


/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
  * @{
  */

/**
  * @brief  Return the device identifier
  * @note For STM32F405/407xx and STM32F415/417xx devices, the device ID is 0x413
  * @note For STM32F42xxx and STM32F43xxx devices, the device ID is 0x419
  * @note For STM32F401xx devices, the device ID is 0x423
  * @note For STM32F401xx devices, the device ID is 0x433
  * @note For STM32F411xx devices, the device ID is 0x431
  * @note For STM32F410xx devices, the device ID is 0x458
  * @note For STM32F412xx devices, the device ID is 0x441
  * @note For STM32F413xx and STM32423xx devices, the device ID is 0x463
  * @note For STM32F446xx devices, the device ID is 0x421
  * @note For STM32F469xx and STM32F479xx devices, the device ID is 0x434
  * @rmtoll DBGMCU_IDCODE DEV_ID        LL_DBGMCU_GetDeviceID
  * @retval Values between Min_Data=0x00 and Max_Data=0xFFF
  */
__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
{
  return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
}

/**
  * @brief  Return the device revision identifier
  * @note This field indicates the revision of the device.
          For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001, rev1 -> 0x1003, rev2 ->0x1007, revY -> 0x100F for STM32F405/407xx and STM32F415/417xx devices
          For example, it is read as RevA -> 0x1000, Cat 2 revY -> 0x1003, rev1 -> 0x1007, rev3 ->0x2001 for STM32F42xxx and STM32F43xxx devices
          For example, it is read as RevZ -> 0x1000, Cat 2 revA -> 0x1001 for STM32F401xB/C devices
          For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001 for STM32F401xD/E devices
          For example, it is read as RevA -> 0x1000 for STM32F411xx,STM32F413/423xx,STM32F469/423xx, STM32F446xx and STM32F410xx devices
          For example, it is read as RevZ -> 0x1001, Cat 2 revB -> 0x2000, revC -> 0x3000 for STM32F412xx devices
  * @rmtoll DBGMCU_IDCODE REV_ID        LL_DBGMCU_GetRevisionID
  * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
  */
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
{
  return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
}

/**
  * @brief  Enable the Debug Module during SLEEP mode
  * @rmtoll DBGMCU_CR    DBG_SLEEP     LL_DBGMCU_EnableDBGSleepMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
{
  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}

/**
  * @brief  Disable the Debug Module during SLEEP mode
  * @rmtoll DBGMCU_CR    DBG_SLEEP     LL_DBGMCU_DisableDBGSleepMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
{
  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}

/**
  * @brief  Enable the Debug Module during STOP mode
  * @rmtoll DBGMCU_CR    DBG_STOP      LL_DBGMCU_EnableDBGStopMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
{
  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}

/**
  * @brief  Disable the Debug Module during STOP mode
  * @rmtoll DBGMCU_CR    DBG_STOP      LL_DBGMCU_DisableDBGStopMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
{
  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}

/**
  * @brief  Enable the Debug Module during STANDBY mode
  * @rmtoll DBGMCU_CR    DBG_STANDBY   LL_DBGMCU_EnableDBGStandbyMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
{
  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}

/**
  * @brief  Disable the Debug Module during STANDBY mode
  * @rmtoll DBGMCU_CR    DBG_STANDBY   LL_DBGMCU_DisableDBGStandbyMode
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
{
  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}

/**
  * @brief  Set Trace pin assignment control
  * @rmtoll DBGMCU_CR    TRACE_IOEN    LL_DBGMCU_SetTracePinAssignment\n
  *         DBGMCU_CR    TRACE_MODE    LL_DBGMCU_SetTracePinAssignment
  * @param  PinAssignment This parameter can be one of the following values:
  *         @arg @ref LL_DBGMCU_TRACE_NONE
  *         @arg @ref LL_DBGMCU_TRACE_ASYNCH
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
{
  MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
}

/**
  * @brief  Get Trace pin assignment control
  * @rmtoll DBGMCU_CR    TRACE_IOEN    LL_DBGMCU_GetTracePinAssignment\n
  *         DBGMCU_CR    TRACE_MODE    LL_DBGMCU_GetTracePinAssignment
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_DBGMCU_TRACE_NONE
  *         @arg @ref LL_DBGMCU_TRACE_ASYNCH
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
  *         @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
  */
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
{
  return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
}

/**
  * @brief  Freeze APB1 peripherals (group1 peripherals)
  * @rmtoll DBGMCU_APB1_FZ      DBG_TIM2_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM3_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM4_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM5_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM6_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM7_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM12_STOP          LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM13_STOP          LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM14_STOP          LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_LPTIM_STOP          LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_RTC_STOP            LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_WWDG_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_IWDG_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C1_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C2_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C3_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C4_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN1_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN2_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN3_STOP           LL_DBGMCU_APB1_GRP1_FreezePeriph
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP 
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*)
  *         
  *         (*) value not defined in all devices.
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
{
  SET_BIT(DBGMCU->APB1FZ, Periphs);
}

/**
  * @brief  Unfreeze APB1 peripherals (group1 peripherals)
  * @rmtoll DBGMCU_APB1_FZ      DBG_TIM2_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM3_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM4_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM5_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM6_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM7_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM12_STOP          LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM13_STOP          LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_TIM14_STOP          LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_LPTIM_STOP         LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_RTC_STOP            LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_WWDG_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_IWDG_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C1_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C2_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C3_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_I2C4_SMBUS_TIMEOUT  LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN1_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN2_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB1_FZ      DBG_CAN3_STOP           LL_DBGMCU_APB1_GRP1_UnFreezePeriph
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP 
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
  *         @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*)
  *         
  *         (*) value not defined in all devices.
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
{
  CLEAR_BIT(DBGMCU->APB1FZ, Periphs);
}

/**
  * @brief  Freeze APB2 peripherals
  * @rmtoll DBGMCU_APB2_FZ      DBG_TIM1_STOP    LL_DBGMCU_APB2_GRP1_FreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM8_STOP    LL_DBGMCU_APB2_GRP1_FreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM9_STOP    LL_DBGMCU_APB2_GRP1_FreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM10_STOP   LL_DBGMCU_APB2_GRP1_FreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM11_STOP   LL_DBGMCU_APB2_GRP1_FreezePeriph
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*)
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*)
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
{
  SET_BIT(DBGMCU->APB2FZ, Periphs);
}

/**
  * @brief  Unfreeze APB2 peripherals
  * @rmtoll DBGMCU_APB2_FZ      DBG_TIM1_STOP    LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM8_STOP    LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM9_STOP    LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM10_STOP   LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
  *         DBGMCU_APB2_FZ      DBG_TIM11_STOP   LL_DBGMCU_APB2_GRP1_UnFreezePeriph
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*)
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*)
  *         @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
  */
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
{
  CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
}
/**
  * @}
  */

/** @defgroup SYSTEM_LL_EF_FLASH FLASH
  * @{
  */

/**
  * @brief  Set FLASH Latency
  * @rmtoll FLASH_ACR    LATENCY       LL_FLASH_SetLatency
  * @param  Latency This parameter can be one of the following values:
  *         @arg @ref LL_FLASH_LATENCY_0
  *         @arg @ref LL_FLASH_LATENCY_1
  *         @arg @ref LL_FLASH_LATENCY_2
  *         @arg @ref LL_FLASH_LATENCY_3
  *         @arg @ref LL_FLASH_LATENCY_4
  *         @arg @ref LL_FLASH_LATENCY_5
  *         @arg @ref LL_FLASH_LATENCY_6
  *         @arg @ref LL_FLASH_LATENCY_7
  *         @arg @ref LL_FLASH_LATENCY_8
  *         @arg @ref LL_FLASH_LATENCY_9
  *         @arg @ref LL_FLASH_LATENCY_10
  *         @arg @ref LL_FLASH_LATENCY_11
  *         @arg @ref LL_FLASH_LATENCY_12
  *         @arg @ref LL_FLASH_LATENCY_13
  *         @arg @ref LL_FLASH_LATENCY_14
  *         @arg @ref LL_FLASH_LATENCY_15
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
{
  MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
}

/**
  * @brief  Get FLASH Latency
  * @rmtoll FLASH_ACR    LATENCY       LL_FLASH_GetLatency
  * @retval Returned value can be one of the following values:
  *         @arg @ref LL_FLASH_LATENCY_0
  *         @arg @ref LL_FLASH_LATENCY_1
  *         @arg @ref LL_FLASH_LATENCY_2
  *         @arg @ref LL_FLASH_LATENCY_3
  *         @arg @ref LL_FLASH_LATENCY_4
  *         @arg @ref LL_FLASH_LATENCY_5
  *         @arg @ref LL_FLASH_LATENCY_6
  *         @arg @ref LL_FLASH_LATENCY_7
  *         @arg @ref LL_FLASH_LATENCY_8
  *         @arg @ref LL_FLASH_LATENCY_9
  *         @arg @ref LL_FLASH_LATENCY_10
  *         @arg @ref LL_FLASH_LATENCY_11
  *         @arg @ref LL_FLASH_LATENCY_12
  *         @arg @ref LL_FLASH_LATENCY_13
  *         @arg @ref LL_FLASH_LATENCY_14
  *         @arg @ref LL_FLASH_LATENCY_15
  */
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
{
  return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
}

/**
  * @brief  Enable Prefetch
  * @rmtoll FLASH_ACR    PRFTEN        LL_FLASH_EnablePrefetch
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
{
  SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}

/**
  * @brief  Disable Prefetch
  * @rmtoll FLASH_ACR    PRFTEN        LL_FLASH_DisablePrefetch
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
{
  CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}

/**
  * @brief  Check if Prefetch buffer is enabled
  * @rmtoll FLASH_ACR    PRFTEN        LL_FLASH_IsPrefetchEnabled
  * @retval State of bit (1 or 0).
  */
__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
{
  return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN));
}

/**
  * @brief  Enable Instruction cache
  * @rmtoll FLASH_ACR    ICEN          LL_FLASH_EnableInstCache
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_EnableInstCache(void)
{
  SET_BIT(FLASH->ACR, FLASH_ACR_ICEN);
}

/**
  * @brief  Disable Instruction cache
  * @rmtoll FLASH_ACR    ICEN          LL_FLASH_DisableInstCache
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_DisableInstCache(void)
{
  CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN);
}

/**
  * @brief  Enable Data cache
  * @rmtoll FLASH_ACR    DCEN          LL_FLASH_EnableDataCache
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_EnableDataCache(void)
{
  SET_BIT(FLASH->ACR, FLASH_ACR_DCEN);
}

/**
  * @brief  Disable Data cache
  * @rmtoll FLASH_ACR    DCEN          LL_FLASH_DisableDataCache
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_DisableDataCache(void)
{
  CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN);
}

/**
  * @brief  Enable Instruction cache reset
  * @note  bit can be written only when the instruction cache is disabled
  * @rmtoll FLASH_ACR    ICRST         LL_FLASH_EnableInstCacheReset
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void)
{
  SET_BIT(FLASH->ACR, FLASH_ACR_ICRST);
}

/**
  * @brief  Disable Instruction cache reset
  * @rmtoll FLASH_ACR    ICRST         LL_FLASH_DisableInstCacheReset
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void)
{
  CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST);
}

/**
  * @brief  Enable Data cache reset
  * @note bit can be written only when the data cache is disabled
  * @rmtoll FLASH_ACR    DCRST         LL_FLASH_EnableDataCacheReset
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_EnableDataCacheReset(void)
{
  SET_BIT(FLASH->ACR, FLASH_ACR_DCRST);
}

/**
  * @brief  Disable Data cache reset
  * @rmtoll FLASH_ACR    DCRST         LL_FLASH_DisableDataCacheReset
  * @retval None
  */
__STATIC_INLINE void LL_FLASH_DisableDataCacheReset(void)
{
  CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST);
}


/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F4xx_LL_SYSTEM_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/